Hey guys, pls tell me what is the name of that black thing witch darkbladez is using on his empty space in his case and where i can find that . Sorry for my english , I realy dont know how to explane u better.
Printable View
Hey guys, pls tell me what is the name of that black thing witch darkbladez is using on his empty space in his case and where i can find that . Sorry for my english , I realy dont know how to explane u better.
sound proofing / dampening. made by akasa i thinkQuote:
Originally Posted by Zoran2
Quote:
Originally Posted by Zoran2
Sound damping.. Is not akasa.. will post pics again when i get hold of akasa, cause now they dont have stock.. :)
great finish. :up:Quote:
Originally Posted by elpibe10
http://img220.imageshack.us/img220/9...22kopiejb1.jpg
Those are Sound Absorption Mats.Quote:
Originally Posted by Zoran2
They're available here :
http://www.petrastechshop.com/3alink.html
Thanks :)Quote:
Originally Posted by deepsilver
Just noticed.Quote:
Originally Posted by Monkeywoman
Would you mind and not steal my Sig? Pm sent aswell
whoa
family of soldams :D :up:
A quickie gallery of some of the mods I've done. Pics link to more pics and info.
http://www.widefault.com/teeny/teeny18.jpg
Click the pic for more
Specs:
Commell LE-370CM6 Embedded 3.5" motherboard
600MHz Celeron-M, 0KB Banias
dual 40mm fans, surprisingly quiet
512MB DDR400@266 due to board limitations
40GB Seagate Momentus 5400.2 ATA 2.5" hard drive
Atheros 802.11b/g wireless card with external antenna
Total case size is around 4.5" deep x 3" tall x 6.5" wide. Pulls under 30 watts of power at load, about half that at idle. Power is a simple 60 watt power brick, overkill but it's what I have available. Performance is around the level of a PIII-600 or Via C3/C7 around 1GHz. Power and reset buttons on the back are from the parts box. Casing is made from parts salvaged from one of the breadbox cases below. Built more as an exercize than anything else.
http://www.widefault.com/35c2d/mermini18.jpg
Click the pic for more
My current work PC, built from a section of an old breadbox.
Specs:
Commell LS-371
Intel Core 2 Duo T7200, 2GHz, 4MB cache
2GB DDR2-667
Onboard Intel GMA950 video, DVI, VGA, and Component video out
Onboard Realtek 5.1 sound
Onboard Intel Gigabit Ethernet
Atheros 802.11b/g wireless with external R-SMA jack
Seagate 80GB SATA drive
Panasonic 8x DVD+/-RW Slot load slimline drive
generic zillion-n-1 flash card reader
100 watt power brick, board has onboard power circuit with 8-24 volt input
All cooled by a single Yate Loon 120mm fan
About 9" tall, 6.75" wide, and 7" deep. Pulls about 27 watts idle, 55 or so under a load.
http://www.widefault.com/whs/whs29.jpg
Click the pic for more
Built to run Windows Home Server using another breadbox.
Specs:
Jetway i945 mini-ITX board
Core 2 Duo T5200(1.6Ghz, 533MHz bus)
1GB DDR2-533
Onboard dual gigabit, HDMI, s-video, component, SATA, etc. LOADED board, just loaded
2x500GB Maxtor SATA drives
Rosewill SI 3114 RAID card - for a future external drive case
One blue Yate Loon 120mm fan
2x4" blue cathodes
Inwin/Powerman 180 watt PSU
Approx 9" square, 60-70 watts under load. Working good so far, but I'm not sure if I'll be keeping WHS on it or not.
http://www.widefault.com/pmrm/pmrm18.jpg
Click the pic for more
The RadPC(above) and RadNAS(below)
http://widefault.com/pmrm/RadNAS2.jpg
Built using surplus 60's Radiation Detection Meters. One has a Pentium-M 1.6GHz on a Commell LE-370, the other an Advantech C3 667MHz board. Both have 512MB RAM and 40GB laptop hard drives. One was built to be a CarPC but has been living on my desk. The other acted as a NAS for a while, but has been out of use.
The radiation meter ones are really neat, extremely creative!
Well finally got the money for my Lian Li , and here is the rough build , next time it will be rearranging the cables.
http://img223.imageshack.us/img223/8107/46497841fx1.jpg
http://img233.imageshack.us/img233/8199/12226397ke9.jpg
Just recently got my cube together.
http://usera.imagecave.com/Litlratt/010.JPG
http://usera.imagecave.com/Litlratt/012.JPG
Very nice elpibe10 , What brand case is that?
Available World wide?
its a Soldam mainly japanese i believe some in US, but i think they have gone out of buisness now, plus they were hugely expensive anyway.Quote:
Originally Posted by Kenetixx
i think the soldam case's are the only cases right now that could convince me to go back to actually using one ;) shame they are not available in the uk
Moved my workstation up to the desk :)
http://img.photobucket.com/albums/v4...5/P1020799.jpg
My pc :
http://img521.imageshack.us/img521/9093/aaaaai1.jpg
http://img521.imageshack.us/img521/9...22c3f7d9b4.jpg
http://img522.imageshack.us/img522/2518/dsc08498fc3.jpg
http://img522.imageshack.us/img522/2...628716a6fa.jpg
http://img63.imageshack.us/img63/9529/dsc08479lz3.jpg
http://img207.imageshack.us/img207/6145/97898xd9.jpg
Wifey's PC :
http://img.photobucket.com/albums/v6...0installed.jpg
http://img.photobucket.com/albums/v6...nternalnew.jpg
http://img.photobucket.com/albums/v6...PearlWhite.jpg
Soldam ALTIUM FC300 Pearl White Mica :D
A lot of PC's in your family man.
9 to be exact. :DQuote:
Originally Posted by Moe_Szyslak
Very nice and clean looking.Quote:
Originally Posted by elpibe10
BUT: Let me let you in on a little secret on a "wifey PC"..
RAID1 ALWAYS..With a empty spare tucked into the machine JUST to have it ready!
Hell hath no fury like a woman with a crashed PC and it usually happens when you don't have the time to fix it..
RAID1 and your life is one of bliss!:ROTF:
I assume we're talking about 9 pc's right? & not 9 wives?:ROTF:Quote:
Originally Posted by elpibe10
LOL ... I'd rather have the latter :DQuote:
Originally Posted by emoners
:shocked: :D dont let ur missus c this post :D :D :D :p: :up:Quote:
Originally Posted by elpibe10
LOL ... she won't. She's a computer noob and doesn't visit such sites. :DQuote:
Originally Posted by tiro_uspsss
lol... post away then
http://i151.photobucket.com/albums/s...1/DSCF2343.jpg
http://i151.photobucket.com/albums/s...1/DSCF2358.jpg
http://i151.photobucket.com/albums/s...1/DSCF2353.jpg
http://i151.photobucket.com/albums/s...SCF2211ca1.jpg
^^ those cables look a little better now.... oh and there should be a nice 8800 in there soon :yepp:
and my camera sucks :yepp: :yepp:
My A380, soon to have Swiftech water installed in it in a very unorthodox fashion - tubes through the top of the case to a rad on the back! I will repost in a couple weeks after the project is finished...
http://i75.photobucket.com/albums/i2...omputer001.jpg
Sorry for the sideways view:rolleyes:
http://i75.photobucket.com/albums/i2...omputer015.jpg
Welcome to the forum paul and thanks for posting some pics, looking good! Plus I like your plans for it, looking forward to seeing the updated pics once it's under watercooling! Hopefully it will give me some new ideas since your planning an unorthodox setup!
ThatGuy16,
Very nice setup you got there, very clean and tidy! By the way what are those switches on the front panel for, I'm assuming fans? They look pretty good, especially if they actually do something, lol! Did your case come with that color or did you paint it yourself? I ask because it's a rare looking color but looks cool!
Thanks. It come that color (NZXT Apollo orange), and the switches from left to right are.. Cathodes, lcd controller panel (controls cpu fan/exhaust), side fan, and front intake fan.
i also have this panel with a 5.4" lcd screen
http://i151.photobucket.com/albums/s...1/DSCF2266.jpg
thats crazy! how did you do the lcd panel interface?
i see you dropped the ccd lighting for the back of the lcd and just used the case lighting
@ThatGuy16: really love that lcd panel on the side...how'd you do that?
lol huh? no its using its ownQuote:
Originally Posted by twin_savage
thanks, its off a 5.4" intec playstation screen stripped down and mountedQuote:
Originally Posted by emoners
oh, it looked like the case background was showing through the other side of the screen, for a sec. as if you used the case's lighting to shine through the lcd instead of the ccd in back of the lcd. umm.. ya
that's what i thought at first thought as well. it would have been cooler like this as well. but the LCD color wouldn't have been as balanced.Quote:
Originally Posted by twin_savage
Heres what it looks like with a webpage, i also added the black border you see here. Im still debating if i want to keep it or not, does it look "tacky"?
those were old, these are new.
http://i151.photobucket.com/albums/s...1/DSCF2378.jpg
http://i151.photobucket.com/albums/s...1/DSCF2374.jpg
im still "iffy" whether i like it :(
i kinda don't see the difference. but i'd like to have one of those tho :(
They are cheap... on ebay of course lol :p:
its cool. i'd sell it, to me of course ;-)Quote:
Originally Posted by ThatGuy16
id like to mount one like that on the front of my case for cpu/fan info, and maybe network activity..... but i have 4 lcd's planned on my pc already. 3- 19" lcd's running through a matrox triple head 2 go on output 1, and a 32" lcd HDTV on output 2. i guess i could get a pci card for such a small screen.:up:
I didn't even see the LCD at first, that is pretty awesome and I'm not usually into that kind of stuff. By the way, did you do all the LCD modding yourself or did you buy the case that way? Also if it didn't come with the case did you buy the LCD pre-modded and ready to mount. Last but not least since the LCD came from a playstation what hardware/software is used to interface it with your PC? Thanks for taking the time to answer these questions because I'm probably not the only one curious!
Love the window but the case is a wannabe AlienwareQuote:
Originally Posted by ThatGuy16
All i done was rip it from the original housing and snip the speakers, and mounted... other than that it was just plug and play it seems you have to do some modding with the ps1 screensQuote:
Originally Posted by Roger_D25
pshh :p:Quote:
Originally Posted by DarthBeavis
If i ever was to get get a bigger case like a lian li or something i would be able to mount it in the bays.. be kewl
NICE.Quote:
Originally Posted by ThatGuy16
I have similar case from NZXT http://www.newegg.com/Product/Produc...82E16811146027
But I donthave the LCD in front. Is that a mod??
Overall pretty nicely put.
its this
NZXT Sentry
if you get it, you need yo use screws to tighten it down, its pretty neat, you can control 3 fans but with the option of 3 speeds
Great!.. will look into it. It should look good on my second case (Same model but blue in color).Quote:
Originally Posted by ThatGuy16
Thanks!
Guys, this....is my work place:
http://i14.photobucket.com/albums/a3...n/DSC00031.jpg
And this is the kind of stuff I do:
http://i14.photobucket.com/albums/a3...n/DSC00035.jpg
http://i14.photobucket.com/albums/a3...n/DSC00038.jpg
http://i14.photobucket.com/albums/a3...n/DSC00045.jpg
http://i14.photobucket.com/albums/a3...n/DSC00008.jpg:rolleyes:
Pretty. I wish I could get an A380PLUS. I guess I'll stick to my 6030PLUS. Nice case.
@Malk4vi4n: i love those mems!:up: Great job modding your Big Typhoon, it looks so much like a Zalman NT!:p:
Yeah...just bend here and there and BAM! You have a Zalman!Quote:
Originally Posted by emoners
hauauhahuahahu
LOL . . .rig I built for my wife before I new squat about watercooling (long gone now . . .lesson . . .TT sucks for watercooling):Quote:
Originally Posted by allig4t0r
http://img156.imageshack.us/img156/2...stom7xlps0.jpg
http://img216.imageshack.us/img216/2...stom3qwdw6.jpg
Thermaltake quality?
http://img507.imageshack.us/img507/1...07827ci.th.jpghttp://img45.imageshack.us/img45/776...stom1hk.th.jpg
my newly painted, and very empty Stacker 830
http://i18.photobucket.com/albums/b1...e/IMG_7792.jpg
http://i18.photobucket.com/albums/b1...e/IMG_7791.jpg
http://i18.photobucket.com/albums/b1...e/IMG_7790.jpg
WOW, nice Lowfat
That's the best case i've seen so far. Looks really neat!
@Malk4vi4n: Why no rear case fan?
my finally finished new case, and new components in it, thank god:)
the uv paint on the fans and NB cooler, heatpipe is gone cos it looks like crap on daylight (u can see it in pic with flash...)
E6750@4GHz
2x1GB ballistix @ 1051MHz 4-4-4-8
asus P5K
x550 :D (will be 2900 soon, i hope)
http://www.imagesforme.com/thumbs/5382DSC01966.JPG http://www.imagesforme.com/thumbs/9674DSC01967.JPG
http://www.imagesforme.com/thumbs/8441DSC01968.JPG http://www.imagesforme.com/thumbs/3821DSC01969.JPG http://www.imagesforme.com/thumbs/9095DSC01970.JPG
My daily usage rig. Not the most expensive hardware but it does its job fine.
specs on it ^^?
I like what you did with the HDD, would be cool to see a Raptor X sitting there.
Well observed, in fact we are still waiting for some fans to arrive so we can finish the machine. It's hard to find good fans in Brasil. . .:(Quote:
Originally Posted by SparkyJJO
But anyway, there is no NEED for fans...did u see the size of those side and front fans? There was air coming out at every single hole in the case and the temps were excellent, like 2-5 degrees lower than outside the case.
Really clean paint job. Can't wait to see how it looks with all the components in.Quote:
Originally Posted by lowfat
im pretty new to the whole game. This is my very first build
http://img88.imageshack.us/img88/1419/1000381ux9.jpg
http://img514.imageshack.us/img514/2135/1000385ka2.jpg
Nice job for your first build, but why no side panel?
I see you have the gigantic Accelero cooler, how is it? I could see two 120MM fans strapped to it to improve cooling.
Malk4vi4n,
First of all beautiful setup man, very nicely done! With that said you should update your system specs unless those two 8800GTX cards are actuallly 6800 vanilla, and those OCZ RAMs are actually only 2GB of Kingston RAM, lol!
Nice setup, where did you get the desk? :)Quote:
Originally Posted by Lumb3Rj4ck
Hey all, i got the desk from a place called "Jysk" its similiar to IKEA for 50 Canadian dollars, it even came with a case shelf that mounted along the bottom side of the desk. There was no side on the case just for picture purposes. Today i pickedup an Antec P182 case that i have just taken out of the box and started to transfer parts onto!:D
http://img502.imageshack.us/img502/9861/1000418zx5.jpg
http://img502.imageshack.us/img502/9785/1000416lv9.jpg
I will post pictures when it is finshed!
http://i20.photobucket.com/albums/b2...temPisyong.jpg
http://i20.photobucket.com/albums/b2...manMFC2Van.jpg
http://i20.photobucket.com/albums/b2...EAST/side6.jpg
http://i20.photobucket.com/albums/b2...sidepocket.jpg
http://i20.photobucket.com/albums/b2...idepocket2.jpg
http://i20.photobucket.com/albums/b2...EAST/side7.jpg
http://i20.photobucket.com/albums/b2...EAST/side5.jpg
http://i20.photobucket.com/albums/b2...EAST/tower.jpg
http://i20.photobucket.com/albums/b2...EAST/side4.jpg
http://i20.photobucket.com/albums/b2...EAST/side3.jpg
http://i20.photobucket.com/albums/b2...ST/front22.jpg
http://i20.photobucket.com/albums/b2...EAST/side1.jpg
Coolermaster Stacker 830 Evo Black (Modded Tray)
Coolermaster Musketeer 2 Black
Vantec Nexxus Black/Blue Led Fan Controller
C2D E6700 @ 3.5Ghz (Daily)
Asus P5B De Luxe Flashed
G-Skill GBHZ 2x1GB PHU1
Forsa Nvidia 8800GTX
OCZ GameXtream 700W
Zalman 9700NT Blue Led Modd
Dell Ultrasharp 2407WFP REV A04 24"WideLCD
Creative 7.1 Spkrs
2x36GB Raptors in Raid-0
1x500GB Internal WD Caviar SE16 KS Edition (For Multimedia)
1x500GB Internal WD Caviar SE16 KS Edition (For Softwares)
1x500GB External WD Caviar SE16 YS Edition w/external Enclosure w/temp, rpm and LCD (for TV Series)
1x160GB Western Digital Passport Portable Hard Drive
Microsoft Lifecam VISTA VX3000 Webcam
Saitek Eclipse Blue Illuminated Keyboard
Razer Diamond Back Plasma Blue Laser Mouse
Steelseries Steelpad QCK Prof. Gaming Maus Pad
Illuminated Blue Lit Maus Pad
Icemat Siberia White w/USB Sound Card
Sony DVRU DVD Rewriter
iMon Ultra Bay (i really love this baby)
zalman mfc2
OCZ XTC Ram Cooler
Silverstone FM121 Modified UV Blue Body Case/ Exhaust
NMB Brushless 120MM Front Intake Fan
Coolermaster Led 120mm Top Exhaust Fan
Antec Spotcool
2xUV Bulbs
the new p182 rig
http://img64.imageshack.us/img64/9119/1000457nv2.jpg
nothing flashy just gets the job done
Must be a noob. My desk is never that clean!! LOL!!Quote:
Originally Posted by Lumb3Rj4ck
i may be new to computers but im not new to keeping my house cleanQuote:
Originally Posted by computerman0416
im just a neat freak and clean and organize everything daily
I am exactly the same way Lumb3Rj4ck! By the way that P182 is coming along very nicely! Wait a minute, just realized it's all finished. Wow, very clean and very neat, very impressed!
My 'Black Dragon' :) :
Soldam ALTIUM VR1000 Black Knight with specially ordered front panel (w/o air vents)
http://img.photobucket.com/albums/v6...K-external.jpg
http://img.photobucket.com/albums/v6...K-internal.jpg
http://img.photobucket.com/albums/v6...waterblock.jpg
http://img.photobucket.com/albums/v6...waterblock.jpg
Separate watercooling systems :
CPU : Black Tygon tubes with clear coolant
GFX Card : Clear Tygon tubes with blood red coolant
Sexy :up:
see thread at bottom of page for update!
I've noticed you like to fry your components with static.
Are you insane lumb3Rj4ck? NEVER put hardware on a carpet. If you want it stop working you could just hit it with a hammer.
Like nzbleach already noted, static electricity will kill hardware. Always keep it in an anti-static bag. If you want to take it out to put it on diplay, put it on top of the anti-static bag.
I have to echo the last two comments, especially on that carpet, hope everything still works Lumb3Rj4ck.
Anywho, heres my rig.
http://img137.imageshack.us/img137/3209/dsc00487xd3.jpg
Sorry for this pic, taken on me phone.
http://img137.imageshack.us/img137/751/dsc00531lo8.jpg
Your PSU, where are the wires? Have you routed the wires behind the mobo?Quote:
Originally Posted by Lumb3Rj4ck
Quote:
Originally Posted by Reckless187
yes they are tucked
I was just waiting for the comments about static electricity!My house is only 2 years old and completely fitted with staticless carpet. The two years i have lived here i have not wrecked one component on the carpet. I knew you guys were going to give me a hard time about that one and i apreciate your concerns. Im going to take that picture down because i know there will be more comments on that
My computer is currently running 100%
I had no intention of giving you a "hard time", I just wanted to save you the dissapointement of having hardware breaking down on you. ;)Quote:
Originally Posted by Lumb3Rj4ck
My rig...
What do you guys think?:cool:
:welcome:Quote:
Originally Posted by iMMoRTaLiTY™
great cable management!
OMG A TT EUREKA!!! I've been meaning to buy one of those! any comments on the case iMMoRTaLiTY?
Hi,
thanks
About the case, the Eureka is one of the best case i've ever seen.
The only con i can tell about is the Thinness of the shield.
But except for that, the Eureka is a great case.
what do u mean by case shield? the sides? the front door thingy?Quote:
Originally Posted by iMMoRTaLiTY™
By case shield I mean the basic shield (Side doors (Not the front door, which unlike the rest of the case. the front door is a Massive part), Roof, Floor)
cool thanks!Quote:
Originally Posted by iMMoRTaLiTY™
Anytime;)
Nice Rigs Everyone!!!
Incidentally, Moe that French anchorwoman in your avatar is one of the hottest women on the planet...
I would have used black zip ties!! LOL!
Do you have two fans on the front of your CPU cooler immortality?
Yes:p:
Nice case.
Like my previous case:cool:
very n1 too
I recently purchased a new 700W OCZ psu so i snapped a few pictures.
http://img141.imageshack.us/img141/3496/1000506ht2.jpg
http://img408.imageshack.us/img408/5403/1000507ge2.jpg
http://img444.imageshack.us/img444/5199/1000503sw3.jpg
http://img408.imageshack.us/img408/3746/1000502ck1.jpg
Let me know what you think! the cpu is running at a temp of 9C* without a fan on the cooler and the antec spot cooler is on the ram because it was actually start to create heat once all 4 sticks were installed.
I am looking to get a new VGA soon
nice cooler
Nice rig Lumberjack, what kind of temps are you seeing @ load with that cooler?
I'm curious on how you wired up that LCD and what kind it is. Almost reminds me of a PSP lcd.Quote:
Originally Posted by ThatGuy16