Printable View
Quote:
Originally Posted by e-jump
hi ya and thanks for your input.
adjusted the voltage to 1.525 on "adjust cpu vid " .... i take it that is the setting i should be changing ..? ( the other setting is CPU voltage ... but only goes up in a percentage. ) .....
strangly when i look at cpu z it sayes my voltage is still 1.45 Volts !
put the mem voltage back to 2.65Volts
it mem86 fine, but think i get BSOD, particually when playing games. .. . .
time will tell.
it won't workQuote:
Originally Posted by Neller
you have to use programms like rmclock or so on
Quote:
Originally Posted by blade148
I have same problem!
best voltage is little CPu voltage and more percentage. I have 1,45V+5% (real 1,5-1,52V).
I have Gigabyte 3D Aurora case. I have good think. Dou you think I should cool my O144 with Thermalright XP90 as only heatsink? I have three 120mm FAN output. (2xbackside case and 1x in powersuply AKASA). I have good air flow in my case, but my CPU doesn't supports C'n'Q and has 1,5V real Voltage.
What do you think about my passive cooling? Should I try It?
ps: In Prime test I have about 50°C, In normal wokr is temp about 35°C.
1.475 - 1.55 is ignored guys by the cpu. Thats due to the newer cpus locked at 1.45 volts. So After you hit 1.45 cpu vid start using the percentages to gain more volts. Maximum is 1.45 + 10 percent which = about 1.63 volts.
Can someone answer to my last post please? What should i do to make it stable pump some vcore? how much for start? thx :(
did u tried 1.4v + 8% or something
u can only up the vcore till around 1.45v .. then u need to use vid %..
my mobo suffers undervolt around 0.02 and it fluctuates >__>
hello i have read alot of folks here have problems with memtest here,stable in dos but failed in windows.That is a problem whith your cpu.The integrated mem contoller on the 64 cpu,s can make it in dos but not in windows.so if youre sure your mem can make it higher try another cpu.Mine can only make 510 mem in windows but it caan make 530 in dos whith memtest 86.
And i don,t think opterons is compatible whith cool and quiet.
hehe wel sorry to have missed your posts in the forums about that silly, anyway seems now to be stable @ 1.5volts. and 250. ..... how much volts can i put through the sandiego +3700 ...? btw i'm still on stock cooling ! .. so won't be expecting alot more out of this til i get a beeter HSF. which air cooler and fan is the best for this mobo, i beleve the ThermalRight SI-120 is very good ( with the fan ) but won't fit on hte board ...???
try sideeffect's site again.Quote:
Originally Posted by Mike6969
it worked just now for me.
http://www.swjka.com/neo2/index.php
Someone can help me.. please.. it´s possible my bios rom to die??? i try the hot flash but when i try the computer freeze..
not really sure..Quote:
Someone can help me.. please.. it´s possible my bios rom to die??? i try the hot flash but when i try the computer freeze..
but the same thing happened to my epox bios chip when i attemp hotflash
it hang in awardflash after i entered the *.bin file
bios rom chip fried? not sure :(
I bought two sticks of this ram and now I can run 250mhz (500) at 6-3-3-2.5 with no errors on memtest for two hours, I will try to overclock to see how high it will go, also my cpu will go up to 273 * 11 = 3003mhz now, before only 2800, it was a good deal.
http://cgi.ebay.com/New-Crucial-Ball...QQcmdZViewItem
coop
Anybody get this board too run two sticks of 512 memory and two sticks of 256 at the same time? I notice in the manual it doesn't show two double sided with two single running, when I try too run them all it gives me a error for window that a system 32 is missing, leave just two in and all his fine.
help
thks
coop
no i never tried that but i think you would lose performance becuse even if it would run right none of them would run ddr.I think any way.Is the 512 ddr or the 256? even if it was only the 256 you would be better off just running the 2 256
I thought this mobo had two dual channels, but I guees i'm wrong, I have two sticks of 512 pc4000 and two sticks of 256 pc4000.
thks
coop
it does have 2 x dual channel but you still got to have the same type of dimms like 4 x 512 or 4 x 256 .. then would be dual channel..:nono:
Well I just bought two more of those sticks, also my RMA corsair came today and they will not due 500mhz, so now I'm going to sell them on ebay.
thks
coop
Im about to upgrade to a MUSHKIN XP Samsung UCCC PC4000 2GB Kit (2x1024Mb) to match up with my X2 4400+. Will this ram run well on the MSI Neo2?
the highest OC'ed UCCC on neo2 was ddr550
mine memtest stable at ddr520, but cant prime/superpi stable
probably my winnie have crappy mem controller :(
but yeah ,pc4000 2gb's will work at rated speed
I just tryed too run all 4 of the corsair 512mb pc4000 in my mobo and all I get is long beeps, I reset the cmos and it does the same thing, pull two of them out and then it boots just fine, any idea why I can't run four sticks of ram?
thks
coop
hi ppl...
i've been using a Neo2 Plat for almost a year now.. and currently have some prob with it. My ram slot 2 had a contact broke off, and i'm now using slots 3 &4.
sys. spec:
Athlon 64 3000+ Winchester LBBID 0509CPJW
2 x 1GB Infineon BE-5 DDR400 Rams
http://img135.imageshack.us/img135/985/new14hs.th.jpg
MSI Neo2 Plat BIOS v1.9
settings are: Vcore 1.45v+3.3%
Vdimm = 2.7v
Ram timings = 3-3-2-7 in bios
http://img135.imageshack.us/img135/6163/2318wc.th.jpg
I'll get a hardlock whenever i try 234Mhz or above with the settings above.. any ideas to improve this?
Here is a update on my rig, the only way I can run all four corsair 512 sticks is too choose 2T in ram settings, as for JSN, you need to contact MSI and have that board RMA before the warranty runs out, I just did mine not too long ago its easy, Fill out the online form and MSI will send you a rma number, goodluck. you don't need the recepit. http://www.msicomputer.com/support/CustomerS.asp
One more thing, did you lower your HT to 4 instead of 5
coop
well, i've tempered a little with it so i dont think it can be rma'ed?
HT is set to 4... i guess its the weak slot 3 n 4 that hinder me here.
:update:
motherboard is returned to the factory..(rma)
the motherboard should bout WITH an opteron cpu...
and mine wouldn't do that...