New RAM List!!! (now with 1GB stick listing too)

Printable View

Show 100 post(s) from this thread on one page

06-19-2005, 11:44 PM
Kasparz

http://www.ocztechnology.com/product...0_dual_channel
Doe's anyboby know, what chips uses this ram?
OCZ today incoming :woot:
06-20-2005, 12:13 AM
TEDY

Quote:

Originally Posted by Kasparz

http://www.ocztechnology.com/product...0_dual_channel
Doe's anyboby know, what chips uses this ram?
OCZ today incoming :woot:

stay away from these....
06-20-2005, 06:17 PM
FiNcH64

Quote:

Originally Posted by God_Lx

If they-re CH-5 they i'll do better... (Or maybe not all CH-5 is that great) i have some CH-5 and it does 215Mhz 2-2-2-5 @ 2.7vdimm (Didn't try higher even) (They do 2-2-2-5 @ 200Mhz with default vdimm but i get some memtest errors...)

dude i got a pair of mushkin pc3500 level one 512mb x 2 and they overclock so damn great..

can run them to 245mhz 3.3 v

250 mhz with 3.4v for benchmarks dont want to toast them so nothing 24/7 only when i get my redline pc4000.. hehe

you most have gotten some bad sticks dude ;)
06-20-2005, 07:08 PM
thezfunk

this Powerbrain PBC...whats so good about it...read this whole thread and didn't see an answer...
06-20-2005, 07:21 PM
ahmad

Quote:

Originally Posted by thezfunk

this Powerbrain PBC...whats so good about it...read this whole thread and didn't see an answer...

BrainPower PCBs tend to overclock better than the standard or enchanced JEDEC PCBs. Why, I don't know. But they are a lot cheaper to produce than JEDEC PCBs thats for sure (its also rumoured that the BP808 do better than the BP815 PCBs...).
06-20-2005, 08:32 PM
Punisher!

Quote:

Originally Posted by ahmad

BrainPower PCBs tend to overclock better than the standard or enchanced JEDEC PCBs. Why, I don't know. But they are a lot cheaper to produce than JEDEC PCBs thats for sure (its also rumoured that the BP808 do better than the BP815 PCBs...).

Exactely.

BP PCB is a 6 layer PCB, so it has less elettric noise than JEDEC (and this mean more overclock) and moreover it is cheaper to be produced.
06-20-2005, 08:43 PM
thezfunk

OK, I have a NForce2 and I am looking at some new ram. Winbond chips don't play nice with my board...especially not BH-5. I am going with TCCD with PB PCB hopefully. Can you safetly run TCCD ram over 3.0v and does it show any improvement?
06-20-2005, 09:06 PM
FLDQUY157

Quote:

Originally Posted by Punisher!

Exactely.

BP PCB is a 6 layer PCB, so it has less elettric noise than JEDEC (and this mean more overclock) and moreover it is cheaper to be produced.

Wow, cheaper and better!!! Hmm...very interesting.
06-20-2005, 11:47 PM
thezfunk

http://www.monarchcomputer.com/Merch...AFFIL=FRG&NR=1

This is TCCD right?

Well I am going to get it...turns out it is on 815 instead of 808 but for that price I can't say no. All reviews I have seen it hit 275+
06-21-2005, 06:46 AM
CJ4

Quote:

Originally Posted by CJ4

The information for the Mushkin Blues is mostly correct if they were ordered recently from Outpost/Fry's. The dual packs were with the BH die, the single packs were with the CH die. The Mushkin Blues also had about 100 pieces of BH-5 on the Jadec PCB thrown in. The older Mushkin Blues had mosel chips.

http://www.ocforums.com/showpost.php...&postcount=191

Any update for this, or is more required?

CJ
06-21-2005, 08:40 AM
Punisher!

Quote:

Originally Posted by CJ4

Any update for this, or is more required?

CJ

Sorry, but in this period I am a bit busy for my University exams (last 3 for this year, "business school" is one of the last in Padua to end!!) :D
06-22-2005, 07:32 AM
TEDY

how good are

2x 512 MB GEIL DDR500 PC4000 UltraX Platinum

TCCD 100% ?
06-22-2005, 02:08 PM
TEDY

GEIL
DDR500 CL=2,5-7-4-4
GL1GB4000DC
PN0649-SN400xxxx

TCCD ?
06-23-2005, 03:53 AM
Vassili

Kingston Ram w/remarked Chips as D328DW-5 --chip--> Winbond BH-5
Kingston Ram w/remarked Chips as D328DW-6 Winbond BH-6
Kingston Ram w/remarked Chips as D328DM-6 --chip--> should Winbond BH-6
Kingston Ram w/remarked Chips as D328DM-5 --chip--> should Winbond BH-5

From the startpost, but that doesn't make sense does it? 2 different labels for BH-5/BH-6. Shouldn't one be CH/UTT?
06-29-2005, 02:15 AM
kristos

ocz_el_ddr_pc_3500_gold_gx_dual_channel

anyone know what chips these carry?
07-01-2005, 11:17 AM
high5

utt bh most likely. its basically the same stuff as gold pc3200, just rated higher.
07-01-2005, 11:42 AM
j_p_h2002

Are on DDR2 Ram always the same chips? no? When yes, what chips are on the ram from OCZ(PC-667 4-2-2-8)?
07-02-2005, 04:30 PM
sphish

I've got some Mushkin L2V2 2x512 right now, but I'm planning on getting 4x512mb and instead of getting another set of l2v2 mushkin, I'm debating 2 sets of OCZ Gold 2x512 (New BH-5).

Couple of questions, anyone have any experience with this at 2.7-2.9v? Does it do the 2-2-2-5 timings? How far has anyone been able to push it?

Should I just get another set of Mushkin L2V2?

Board's a DFI NF4 Ultra-D, newest bios, and I'll be upgrading my Winchester 3000+ to an x2-4200 within the next month. Any input would definitely be appreciated!
07-02-2005, 11:15 PM
high5

ocz rates them 2-2-2@200 w/ 2.8v so it shouldn't be a problem. with 2.9v you can expect to get them to do something like 220 i think.
07-07-2005, 10:16 AM
oziris1978

The New A Data Pc4500 Have New Samsung Tcc5 Chips!!!
07-07-2005, 02:52 PM
b1tterman

could someone compare d5 chips(maybe kingmax ddr500) with something else like TCCD and UTT/BH-5 in tight,medium and loose latencies please, i got them and dunno how high i may clock with them. thx
07-07-2005, 05:33 PM
suio

Which TCCD based memory works best with DFI NF3 250 board?
07-07-2005, 07:26 PM
FiNcH64

about the corsair pc4400 c25 chips are samsung tccd???

hey guys, im about to buy a pair of this memos for a 1gb dual channel kit.. i have to purchase them separatly cause they dont have twinx pairs. so i hope they give me the same perfomance as the ones selled as twinx..

so my question is.. if are you sure that this sticks are samsung tccd?? cause i have seen good reviews about them but i dont want to get wrong and get some hynix 5, or vitelic 5ns :mad: ..

so i appreciate that someone confirm that this are super cool samsung tccd as in the ram list!! is speciefied hehe :D

thx
07-08-2005, 11:07 PM
Zanr Zij

@Punisher :

1. Corsair TwinX1024-3200 v6.1 :< PCB same as XLPT v1.2 ( Brain Power )>

http://www.xtremesystems.org/forums/...&postcount=208

Result : @3.5v

http://img276.echo.cx/img276/9624/ddr5209vi.jpg

==> UTT BH-5 IC

2. Corsair TwinX512-3200C2PT v1.7 : PCB same as XLPT v1.2 ->Brain Power.

http://www.xtremesystems.org/forums/...&postcount=212

Result :@3.6v

http://img74.imageshack.us/img74/3919/28spi3ql.jpg

==> UTT BH-5 IC

:D
07-10-2005, 04:21 PM
Punisher!

Quote:

Originally Posted by Zanr Zij

@Punisher :

1. Corsair TwinX1024-3200 v6.1 :< PCB same as XLPT v1.2 ( Brain Power )>

http://www.xtremesystems.org/forums/...&postcount=208

Result : @3.5v

http://img276.echo.cx/img276/9624/ddr5209vi.jpg

==> UTT BH-5 IC

2. Corsair TwinX512-3200C2PT v1.7 : PCB same as XLPT v1.2 ->Brain Power.

http://www.xtremesystems.org/forums/...&postcount=212

Result :@3.6v

http://img74.imageshack.us/img74/3919/28spi3ql.jpg

==> UTT BH-5 IC

:D

Nice, thanks a lot! :D

Show 100 post(s) from this thread on one page