c results

Printable View

Show 100 post(s) from this thread on one page

08-20-2012, 04:10 AM
hyper_2002

Quote:

Originally Posted by Zeus

I've had one with that batch code. It was a bad overclocker. Massman @ Hwbot have tested a few of that same batch and had a few good ones though. 5G on water is a quite a stretch, tried 3x 3770K's so far and non could accomplish that. At least not LinX and/or Prime stable at reasonable voltage. I don't want to run over 1.4V for daily use.

Thanks for info . Going to look around for another batches... Any recommendations what batches i should be looking for.. ? ;) As I see it is lottery and even the same batches overclock completely different... :/ Do not remember such diversity with old i920..
08-20-2012, 05:36 AM
Vivi

2 X 3224A968 Costa rica 3770k

both boot 2933 mem divider on UP5.
both do 1.35v 2c 5ghz
08-20-2012, 06:04 AM
hyper_2002

max safe vcore 3570k/3770k for 24/7 use ?
08-20-2012, 06:41 AM
theix

Quote:

Originally Posted by Vivi

2 X 3224A968 Costa rica 3770k

both boot 2933 mem divider on UP5.
both do 1.35v 2c 5ghz

you are definitely one lucky person to have those 2!
08-20-2012, 03:06 PM
dr_dx

Quote:

Originally Posted by hyper_2002

Thanks for info . Going to look around for another batches... Any recommendations what batches i should be looking for.. ? ;) As I see it is lottery and even the same batches overclock completely different... :/ Do not remember such diversity with old i920..

Are you willing to remove the IHS and apply different TIM? If so, then you will have a much better chance of finding a 5Ghz daily driver; if not, then you will have to be very lucky.
08-23-2012, 09:12 AM
Melhisedek

Guys what voltages can I try and lower in order to get better temps but keep stability? For example I have lowered PLL to 1.5, went even to 1.2 with no ill effects on stability or overclock 3570 @ 4.5 default vcore.
I think there was one other I could try but can't remember the name

Thank you for your time!
08-24-2012, 12:18 PM
mean6

Hey guys, just arrived!! 3770k batch#L222B340. Anyone have one of these or have any idea how they clock. I haven't opened it yet, so I still can send it back. Would just like to know before hand if possible. Thanks
08-24-2012, 12:49 PM
deachus

Quote:

Originally Posted by mean6

Hey guys, just arrived!! 3770k batch#L22B340. Anyone have one of these or have any idea how they clock. I haven't opened it yet, so I still can send it back. Would just like to know before hand if possible. Thanks

Your missing a number in the batch# L22?B340. Post back with the full batch #
08-24-2012, 12:51 PM
deachus

I just picked up an L223B645 at MicroCenter. Will test this weekend and post results... If it clocks better than my current L221B009 3770K which needs 1.41v LLC-Extreme at 5Ghz then I will keep it and sell my current chip.
08-24-2012, 01:34 PM
mean6

Quote:

Originally Posted by deachus

Your missing a number in the batch# L22?B340. Post back with the full batch #

Oops, edited previous post. Thanks
08-25-2012, 11:09 AM
mean6

Quote:

Originally Posted by mean6

Hey guys, just arrived!! 3770k batch#L222B340. Anyone have one of these or have any idea how they clock. I haven't opened it yet, so I still can send it back. Would just like to know before hand if possible. Thanks

I installed the chip, haven't popped off the IHS yet, just waiting for the liquid pro to arrive. But so far, after a few minutes of playing with the bios I have it overclocked to 4.6 with 1.328 volts. I ran a quick 20 pass test with linx, and it passed. Hopefully I can squeeze more out of it. Stay tuned!!!!
08-26-2012, 05:49 AM
andressergio

well this is my FIRST 3770K and just loving it

boots perfect at 2800 mem and its rock solid at 5GHz HT offset +0.19 TeamX 2600CL10, IHS removed and tim changed, dropped 10C exactly

since saturday played max payne3, BF3, MOH, GTA, Crysis 1 and 2, Sleeping Dogs, not a single BSOD or error :) my other chip took 1,520 to be 5GHz stable same mem speed and was a 3570K

sorry the screen i didnt put the mem

http://i.imgur.com/Gp7QU.jpg
08-26-2012, 10:38 AM
dr_dx

Quote:

Originally Posted by andressergio

well this is my FIRST 3770K and just loving it

boots perfect at 2800 mem and its rock solid at 5GHz HT offset +0.19 TeamX 2600CL10, IHS removed and tim changed, dropped 10C exactly

How do you like the TEAM RAM? I see you have it at 1.665v, what are your timings?
08-26-2012, 11:05 AM
l0ud_sil3nc3

@ sergio is that the one I sent you?
08-26-2012, 11:43 AM
flesheatinvirus

Nice chip you have there.
08-26-2012, 02:40 PM
andressergio

Quote:

Originally Posted by dr_dx

How do you like the TEAM RAM? I see you have it at 1.665v, what are your timings?

well at first i hate it as new brand kit from the egg 2400CL9 1 stick dead, i sent to China and almost 2 month to have them, in the meantime i bought same kit from a friend here and it does amazing clocks, this new batch dont do even 2600CL10 as my current one

Quote:

Originally Posted by l0ud_sil3nc3

@ sergio is that the one I sent you?

no mate its from another friend here that came on the same pack, but yours did the same except RAM harder to get higher than 2600+, this one boots the teamX 2400 at 2800 12-14-14-35 1T at 1,685

Quote:

Originally Posted by flesheatinvirus

Nice chip you have there.

thanks mate !!!

this are my 24/7 timmings CPU is sleeping due to OFFSET :)

http://i.imgur.com/WxogA.jpg

cheers to all
Sergio
08-26-2012, 10:49 PM
dr_dx

Nice tight timings. Do you remember what you used for 2800? Could you go 2800C10?
08-27-2012, 06:40 AM
andressergio

Quote:

Originally Posted by dr_dx

Nice tight timings. Do you remember what you used for 2800? Could you go 2800C10?

Thanks buddy !!!

i will receive the Gskills 2800 CL11 this week i had the luck a good friend bought when they where still at reasonable price :)

i putted my TeamX EARLY BATCH (see above why) at 2800 12-14-14-35 1T @ 1.685 and tried 2800 11-14-14-35 1T @ 1.71 but i want this kit to survive so im just waiting the real 2800 ones

cheers !!!
Sergio
08-28-2012, 04:30 PM
deachus

Heres my best L221B009 3770K using offset vcore set at + .175v with CPUZ load showing 1.384-1.408. I tested at least 4 L221B009's and 3 L223BXXX and this is the one I kept.

This G.Skill TridentX kit sucks, have a TeamGroup kit on its way and working on getting another kit to test my IMC.

http://i580.photobucket.com/albums/ss250/q9650/5Ghz.jpg

EDIT
Got my new TeamGroup 2x4GB 2400Mhz kit today and my IMC was able to easily do 2600Mhz. Will test max mhz and try tighten 2600Mhz timings.

http://i580.photobucket.com/albums/s...600MhzDDR3.jpg
09-01-2012, 07:05 PM
ZeroOne

Anyone else with a similar 3223B598 (Costa Rica)? It is taking upwards of 1.560v to pass 3x linx at 90C for 5Ghz.

4.8 is looking to be 1.375v @ 73C (30C ambient). Seems much worse than many of the chips posted in here.
09-06-2012, 10:14 AM
Dumo

Got 3X 3226B953

The first 2 went 23 @ 2933 boot

Heres the last one out of the box on cold..

http://img545.imageshack.us/img545/9...enshot014d.png

Boot up @ 1.455V 4C/8T on SS cooling LLC auto 5.4Ghz

http://img32.imageshack.us/img32/770...nshot023jw.png
09-09-2012, 09:08 AM
Alex-Ro

Andressergio,i know you had the maximus 4 extreme with p67 and now V gene.Is there any difference regarding vcore,i want to know if the chip wants more voltage on the P67 than on Z77.Anyone else has an answer?Thanks.
09-09-2012, 09:23 PM
Dumo

3226B953 imc on air

http://img607.imageshack.us/img607/4...enshot029l.png
09-10-2012, 03:43 AM
angkies

Quote:

Originally Posted by Dumo

3226B953 imc on air

[spoiler]http://img607.imageshack.us/img607/4...enshot029l.png[/spoiler]

send it to jakarta plz.. :p
09-11-2012, 02:10 PM
Dumo

Probly will angkies:)

Keep on binnin'

3226B991 imc 2933+ air

http://img405.imageshack.us/img405/2...enshot036v.png

Show 100 post(s) from this thread on one page