Cooler Master HAF 932

Printable View

Show 100 post(s) from this thread on one page

03-07-2009, 07:44 PM
LuckyNV

nope, fan spacing is 15mm
03-07-2009, 07:48 PM
cardnut99668

How hard would it be to get it to fit?
03-08-2009, 04:14 AM
LuckyNV

should be easy, I know someone who fit the PA120.3 such that the front fan hole was used correctly and then he just drilled holes (or widened the holes in the mesh) in the right place in the mesh for the other fan holes.
He didn't fit every screw though, just enough to hold the rad in place
03-08-2009, 05:34 AM
Blacky

Quote:

Originally Posted by cardnut99668

Is it possible to fit a Thermochill PA120.3 in the top of this without modification? I've been considering getting one.

Yes

http://i475.photobucket.com/albums/r...6/IMG_0012.jpg
03-08-2009, 09:57 AM
vikrant333

Quote:

Originally Posted by XHAFMaster

I came up with 3 ideas so far for the filters. Foam filter from a room air condtioner, panty hose and paint filters. Will probably try all 3 to see what works best and looks best.

how to put customize dust filters on it ??
as the HAF is vaccum cleaner . my inner of cabinet looks same like inner of vaccum cleaner.
someone told me use the AC dust filter by removing the fan and put the filter on it and it helps quite a lot...
03-08-2009, 10:29 AM
Odyssey96

Quote:

Originally Posted by Greenfox

Firts of all, thanks Blacky for your help on the water loop! :)

Heres my pre-final look!, waiting for another UV cathode and a fan I ordered to finish the rig. Enjoy :D!

http://i6.photobucket.com/albums/y24...o/CIMG2940.jpg

http://i6.photobucket.com/albums/y24...o/CIMG2946.jpg

Overall, I'm extremely happy with my new platform, it has surpassed my expectations :)!

Great job, that looks fantastic.
03-08-2009, 10:41 PM
Malbadawi

do you guys think the hydrx( uv green) will be a good color in this case?
03-12-2009, 12:06 PM
evoted

Well im almost done with mine, ill update the pic when im done, i got 1 thing left to do.

http://i248.photobucket.com/albums/g...d/DSCN0147.jpg
03-14-2009, 02:20 AM
vikrant333

someone told me......bump how to put dust filters on haf 932
03-15-2009, 07:40 AM
Darren K

I'm probably going to swap the 230mm side door fan for 4x 120mm Noctua fans. Can anybody please tell me how I can wire the 4 fans together (using an adapter or whatever) to plug them directly into my Corsair HX1000. :)

I'm trying to keep the damn NB temp down without getting into watercooling at the moment.

I have used my imagination and fitting an additional Noctua fan that blows onto the NB heatsink and RAM slots. Sadly this has only reduced the temp by 3-4 degs, temp now sits @ 40 deg.

Also thinking if it's possible to fit my HX1000 PSU at the top of the case instead of at the bottom. This way I could have 2 more fans in the floor.
Can this be done?

Thanks guys...
03-15-2009, 09:41 PM
Roguegamingpc

Her is my finished product, my only complaint is that it weighs a ton!
http://img.auctiva.com/imgdata/1/1/3...35926929_o.jpg
http://img.auctiva.com/imgdata/1/1/3...35926975_o.jpg
http://img.auctiva.com/imgdata/1/1/3...35944927_o.jpg
http://img.auctiva.com/imgdata/1/1/3...35781695_o.jpg
and Pre I7
http://img.auctiva.com/imgdata/1/1/3...35781325_o.jpg
03-15-2009, 09:47 PM
LOUISSSSS

how thick are the side panels of this case? thicker than the aluminum in the LL V1000? do they bend easily? how about compared to the centurion 5?

anyone want to buy my LL V1000B Plus?
03-16-2009, 07:38 AM
SNiiPE_DoGG

certainly not thicker than v1000 panels, they are the thickest panels ever put on a case lol.
03-16-2009, 11:15 AM
sadidas

Hello XS! I was observing this wonderful forum quite a long time so it's time for me to finally "enter" :)
Here's my share to the HAF owners around the globe ;)

http://img220.imageshack.us/img220/2623/61810701.jpg

http://img220.imageshack.us/img220/5579/33888643.jpg

http://img228.imageshack.us/img228/3654/67848708.jpg

http://img232.imageshack.us/img232/4007/43698027.jpg

Quote:

I'm probably going to swap the 230mm side door fan for 4x 120mm Noctua fans. Can anybody please tell me how I can wire the 4 fans together (using an adapter or whatever) to plug them directly into my Corsair HX1000

As You can see I'm using 4 120mm fans instead of one big & ugly 230mm. I "joined" the 4 fan cables with soldering gun :D Basically You have to brutally cut off 3 fan connectors and solder the loose wires to 4th fan connector - black to black and red to red. I didn't soldered the yellow rpm ones. Then just connect the connector to Your psu. You can also use sone fan cable splitter if You like:

http://www.caseking.de/shop/catalog/...UAD_073_1g.jpg
03-16-2009, 06:22 PM
LOUISSSSS

Just ordered my HAF today, guess the consensus was that it was generally a better case than the Antec 1200.

i would've ultimately preferred a Lian Li Full tower, but i just can't afford it in this recession. their quality is remarkable.

we'll see how this case compares in quality to my LL v1000
03-17-2009, 09:22 AM
shaolin95

Sweet..welcome to the club. I just ordered some red sound activated lights for mine..trying to pimp it a bit now. :-)
03-17-2009, 11:40 AM
LOUISSSSS

Quote:

Originally Posted by shaolin95

Sweet..welcome to the club. I just ordered some red sound activated lights for mine..trying to pimp it a bit now. :-)

nice, but i'm not the type to like LEDs from my computer case.

i'm planning to change out the red front fan with a non-led one and also find a way to dim that bright blue power LED
03-17-2009, 07:46 PM
SabreSword

Anyone going to the soup line for supper since we are in a recession? :shrug:
03-17-2009, 07:52 PM
lee143

Quote:

Originally Posted by sadidas

As You can see I'm using 4 120mm fans instead of one big & ugly 230mm. I "joined" the 4 fan cables with soldering gun :D Basically You have to brutally cut off 3 fan connectors and solder the loose wires to 4th fan connector - black to black and red to red. I didn't soldered the yellow rpm ones. Then just connect the connector to Your psu. You can also use sone fan cable splitter if

From one of the great guides in the forums, I'm pretty sure you do not solder the yellow ones because then it gives you the RPM * How many fans you have. I wish I could find the guide since I used it to connect my rad fans together.

Quote:

Originally Posted by SabreSword

Anyone going to the soup line for supper since we are in a recession? :shrug:

Huh? :ROTF:
03-17-2009, 08:47 PM
LOUISSSSS

for those who r watercooling their HAF, which way do youguys have ur barbs pointing down from? the drive bays side or the rear side?
03-18-2009, 07:11 AM
bito

Greenfox....could you post some pics from the top please so we can see the mods. required to fit the PA120.3 ?

Thanks
03-18-2009, 10:35 AM
LuckyNV

Quote:

Originally Posted by LOUISSSSS

for those who r watercooling their HAF, which way do youguys have ur barbs pointing down from? the drive bays side or the rear side?

I have seen pics of people using either end :)
03-18-2009, 02:10 PM
Blacky

Quote:

Originally Posted by bito

Greenfox....could you post some pics from the top please so we can see the mods. required to fit the PA120.3 ?

Thanks

He is gooing to take some shots today and upload them ASAP mate :)
03-18-2009, 03:10 PM
Greenfox

Quote:

Originally Posted by Odyssey96

Great job, that looks fantastic.

Thanks man!

Quote:

Originally Posted by bito

Greenfox....could you post some pics from the top please so we can see the mods. required to fit the PA120.3 ?

Thanks

Sure I took these with my iPhone sorry for the bad quality!

http://i6.photobucket.com/albums/y24...o/IMG_0010.jpg

http://i6.photobucket.com/albums/y24...o/IMG_0008.jpg
03-19-2009, 06:32 AM
bito

^^^ Great....Looks good, so just two extra holes drilled in the front bit, any under the cover ?
No mods to the PA120.3 ?

Thanks

Show 100 post(s) from this thread on one page