D-tek nozzles

Printable View

Show 100 post(s) from this thread on one page

11-05-2007, 03:32 AM
peebee

Wohooo! :D

Just got my nozzles from Overclock-UK! Just simple mail and only few days from UK to Germany!

Well, let us see, what it brings to my Q6600. ;)
Maybe nothing, maybe some drop. (drop in flow for sure haha)
11-05-2007, 05:01 AM
disruptfam

lol @ sig :shrug:
11-05-2007, 05:16 AM
peebee

Quote:

Originally Posted by disruptfam

lol @ sig :shrug:

?? :shrug:
My sig?
What about my sig? :rolleyes:
11-05-2007, 07:13 AM
Nate P.

Quote:

Originally Posted by peebee

?? :shrug:
My sig?
What about my sig? :rolleyes:

It's hilarious!:rofl: :rofl: :rofl: :rofl: :rofl:
11-05-2007, 07:28 AM
peebee

It is a wise sentence at all :yepp:
Originally from Bruce Lee! :p:

I like it very much! Especially the words, that it can flow or crash. :cool:
My tubing wasn´t secure for 2 times (while testing the loop) and the water splashed through my case. I was very busy cleaning it all. If this happens to my computer while running, it crashes. If the tubes are secured, it flows.(~450l/h) :D
11-05-2007, 10:17 AM
Shadowtester

I thought you were going to say it was from a fortune cookie :)
11-05-2007, 07:32 PM
louie101086

my nozzles are pretty good and so is my new q6600 has a low vid and overclocks like a charm i got 3.2ghz @ 1.35 havent really banged out because i just got my p35-dq6 but voltages are very stable vdroop isnt that bad and temps are all around 33c except 4th core its around 28c
11-05-2007, 07:34 PM
disruptfam

bruce lee is my hero!!! :)
11-05-2007, 10:20 PM
peebee

Quote:

Originally Posted by Shadowtester

I thought you were going to say it was from a fortune cookie :)

:up: nice one! :D We should give this idea to a fortune cookie maker! :rofl:

Quote:

Originally Posted by disruptfam

bruce lee is my hero!!! :)

Mine too! Since I heard about his words regarding water and this german joke: http://www.myvideo.de/watch/103085

I don´t know, if you could understand anything, it is german, but if, it is very very funny :D :D :D

Back to topic:

Quote:

Originally Posted by louie101086

my nozzles are pretty good and so is my new q6600 has a low vid and overclocks like a charm i got 3.2ghz @ 1.35 havent really banged out because i just got my p35-dq6 but voltages are very stable vdroop isnt that bad and temps are all around 33c except 4th core its around 28c

Did you test it with nozzle only on your CPU? :rofl: How did you fit the nozzle in your loop?

Just kidding The D-Tek itself is a good cooler. The question is: Is the D-Tek better with nozzles or is it as good as without. ;)

The temps in idle are not that interesting. Full load by stress tools like prime95. ;)

D-Tek without Nozzle!

1,45Vcore = 3,6 GHz Temps on load around 59-62C°
1,48Vcore = 3,7 GHz Temps on load around 65-67C°
11-06-2007, 10:08 AM
rogard

Just installed my nozzles and had a nice temp drop of between 3-5c!

Much more than I was expecting and the tim has not had time to setin yet!
11-06-2007, 05:16 PM
disruptfam

Quote:

Originally Posted by rogard

Just installed my nozzles and had a nice temp drop of between 3-5c!

Much more than I was expecting and the tim has not had time to setin yet!

awesome what nozzle and what cpu are you cooling??
11-06-2007, 05:31 PM
HotGore

Can you guys post what nozzle you are using, since there are a bunch. :)
11-06-2007, 06:37 PM
iadstudio

4.5mm for core2duo.
11-06-2007, 07:42 PM
nikhsub1

Well ive been using the 4.4mm, I just got a Q6600 today too (G0) and i will keep the same nozzle in.
11-06-2007, 08:13 PM
iadstudio

Quote:

Originally Posted by nikhsub1

Well ive been using the 4.4mm, I just got a Q6600 today too (G0) and i will keep the same nozzle in.

4.4mm??? Must be making fun of me.

When I first go my nozzles I measured all them and I swore they were .2mm off each. Upon further investigation, they were the advertised sizes. I was so paranoid about it I actually took an awl and burnished the 4.5mm nozzle opening to 4.7mm (since that's what I was told is the optimum opening size)

I do wonder what will work best for the Quads, but there is no question with dual cores.
11-06-2007, 10:49 PM
DarkSephiroth

Did quad nozzle and temp is the same. :(
11-06-2007, 10:59 PM
nikhsub1

Quote:

Originally Posted by iadstudio

4.4mm??? Must be making fun of me.

When I first go my nozzles I measured all them and I swore they were .2mm off each. Upon further investigation, they were the advertised sizes. I was so paranoid about it I actually took an awl and burnished the 4.5mm nozzle opening to 4.7mm (since that's what I was told is the optimum opening size)

I do wonder what will work best for the Quads, but there is no question with dual cores.

LOL, typo I meant 4.5mm. Where did you hear 4.7mm is optimal?
11-07-2007, 05:19 AM
Xilikon

Quote:

Originally Posted by nikhsub1

Well I just installed the 3.5mm nozzle. All I can say is WOW! Holy flowkiller Batman! MUCH more restrictive than the 4.5mm... I can honestly say there is really no reason to use the 3.5mm at this point. I haven't officially run it on the test bed but judging by the flow killage with 2 DDC-2's in series I say best to stay away. Cathar funny enough mentioned that ~4.7mm is optimal. This is all on a dual core FWIW.

You said that yourself :)
11-07-2007, 06:58 AM
nikhsub1

Quote:

Originally Posted by Xilikon

You said that yourself :)

Bah I know that, I was asking him :D
11-07-2007, 07:30 AM
iadstudio

Quote:

Originally Posted by nikhsub1

LOL, typo I meant 4.5mm. Where did you hear 4.7mm is optimal?

nikhsub1 told me so. lol

BTW. is there a link to cathar's testing? or was that just hearsay? Maybe I should have asked that before I modified my nozzle. :shakes:

I just had a feeling I could trust your word when it came to hardware.
11-07-2007, 08:09 AM
rogard

Quote:

Originally Posted by disruptfam

awesome what nozzle and what cpu are you cooling??

Im using the smallest nozzle.

CPU is 6400 @ 3400 @ v1.45

Temps before 40/42 @ prime load
Temp now 35/39 @ prime load

Fans are fn121 @ 7v

But I have dual d5s (on setting 3 and a pa120.3 and pa120.2) all for CPU :)

fyi air con is set at 21C however ambient is about 20/19C
11-07-2007, 09:18 AM
iadstudio

Quote:

Originally Posted by rogard

But I have dual d5s (on setting 3 and a pa120.3 and pa120.2) all for CPU :)

:shocked: That should take care of the flow problem with the small nozzle.
11-07-2007, 11:45 PM
peebee

Overkill :D
Only one PA120.2 should do the same work in cooling the CPU.
11-08-2007, 10:54 PM
peebee

Quadnozzle and washer mounted.
Temperature dropped 2-3°C.
Flow dropped from ~425l/h to ~350l/h

If it really comes from the nozzle, it is a good thing for enthusiasts. If not, it was a better mounting of the cooler on the cpu now :D
11-09-2007, 05:47 AM
leo_bsb

using the washer and the nozzle are the only steps needed to get the block bowed? Any other procedure?

Show 100 post(s) from this thread on one page