Quote:
Originally Posted by teurorist
Thanks for this,it seems bumping GHz up a little makes a big difference,no wonder I'm behind I'm still at 5000 Ghz,its all good I think we just need to sort out the limit
Printable View
Quote:
Originally Posted by teurorist
Thanks for this,it seems bumping GHz up a little makes a big difference,no wonder I'm behind I'm still at 5000 Ghz,its all good I think we just need to sort out the limit
No worries guys i can run it again... It's just the motherboard,if you set 49*102.1 in bios it goes up a bit in the os... just this don't worry i will run again a touch down...:)
Sick BBSE, I can't believe it.Quote:
Originally Posted by crustytheclown
wow! Great run crusty..D :shocked:
Slick scores! :eek:
Also I like your music taste:up: :D
Hey little testing Ive been doing,the second UP5 board is different to bench on and seems to require less volts and able to push memory's a bit higher frequency.Both these runs are @2v and Pi Cl6
4GHz run,trying different things
http://s3.postimg.org/cbyg4wc77/image.png
Some 5Ghz fail im still testing,should finish strong if im able too pull it off
http://s21.postimg.org/msz3a8ojb/cvg.png
Pic off pulling memory pot down
http://s7.postimg.org/wzoxbjrsb/DSCN7104.jpg
Very impressive bullant, have you tried your dimms in any other boards? Curious to see how your set clocks on Asus/Asrock:DQuote:
Originally Posted by bullant
Hey Loud thanks,Ive never tried either off those boards on Z77,have been tempted to try the Asrock cause i can see its a really efficient boardQuote:
Originally Posted by l0ud_sil3nc3
Did manage to get same as my best score,different settings
http://s1.postimg.org/3uxdlnoz3/image.png
Hi Bullant. tRRD = 8? Some problems with the mobo/RAM? Don't get me wrong, it obviously works just fine but that timing seems high.Quote:
Originally Posted by bullant
Hi,I normally run it at tRRD4 but i forgot to set it too tRRD4 and only notice it when i did the screen shotQuote:
Originally Posted by Calathea
nice memory and crazy numbers that you pull out :)
Some late pics from the setup of the 7-9-7 run
http://abload.de/thumb/imag01290ps37.jpg http://abload.de/thumb/imag0132qwsvg.jpg
Thanks natu,nice pics,just got a better 4GHz check the initial loop out
http://s23.postimg.org/k1stkpxsb/image.png
http://s7.postimg.org/3ym0bsynf/DSCN7114.jpg
getting warmed up:)
http://i.imgur.com/CYVcor0.png
Awesome work loud,some strong memory's their and some very nice clocking and tweaking skills.This is why I post and I like seeing everyone's subs because their is so much we can learn from every sub,thanks for sharing and nice work as always :up:Quote:
Originally Posted by l0ud_sil3nc3
Holy crap loud,this will end up under 16 s :D Awesome memory,is that memory from greece?Now i truly hate you :D
l0ud_sil3nc3 - 6:16:531 - 49x102.1 - 1326.8MHz - 6-9-7-28-88-1 - Asrock Z77 OC Formula - G.Skill PI 2300 8-11-8-28 2x2GB (PSC) - 2.1v - LN2 @ all
http://i.imgur.com/eK4N4qS.png
this might have been the one. . .
http://i.imgur.com/sjw9x5N.png
damn nice clocks for tRCD 9
Awesome ram:up:
Thats a keeper:)
awesome G.Skill 2300 C8 have you.
Hope you set some new highscore :)
I was really happy to found 1300 7-9-7 psc and now you show some crazy 1300 6-9-6 :rocker::toast:
proud of you man!Quote:
Originally Posted by l0ud_sil3nc3
Nailed it man...huge congrats!!!
crazzzzzzzzzzzzzzzzzy memories loud :shocked:
for your viewing pleasure:D
http://i.imgur.com/OlN7Lj4.jpg
http://i.imgur.com/kgpmWqq.jpg
http://i.imgur.com/2YlaXPW.jpg
http://i.imgur.com/IBrYGHR.jpg
http://i.imgur.com/bDJhp7p.jpg
http://i.imgur.com/uXfBgaF.jpg
I could not have done any of this without the vast help from this thread and the awesome members in this community and good friends. (Zen, Splave, Dumo, Don Dan, Sham, runmc, hiwa, bullant etc...)
Agreed Sam did not except tRCD 9 at 2600+, that's Andre dimm territory:DQuote:
Originally Posted by TaPaKaH
Indeed Roy, 2300 c8's from early seem to be good clockers.Quote:
Originally Posted by Dumo
I wish I might try and tackle this again this weekend when I refill, I'm out of gas atm.Quote:
Originally Posted by natu
http://i.imgur.com/HMu0EVb.jpgQuote:
Originally Posted by Splave
I know you are going to tag me tomorrow when the goods get there XD
ευχαριστίες:D Still trying to chase your run down, but I think I am going to need 2 more dimms to catch you and Angoholic.Quote:
Originally Posted by crustytheclown
Thank you mr. efficiency:)Quote:
Originally Posted by angoholic
Awesome loud,its one thing to have some nice memory's for the job but to put a run together like you have done here really does show case your awesome memory skills,well done mate.
http://cdn.memegenerator.net/instanc...x/37268946.jpg
Golden sticks man
next time they are naked can we get the X series second 2 letters :)
You shall not exact in round...:D
So that's what you've been up to lately... Sick run! :up:Quote:
Originally Posted by l0ud_sil3nc3
Another 4Ghz improvement,will test 5Ghz next time on refill,so much more to test
http://s21.postimg.org/6nvq7qt93/image.png
^ Wow, 42's are at your fingertips!
Those settings at 5Ghz will for sure be under 16.16.4xx
Thanks Loud,didn't test 5ghz but did test 4ghz at these timings above @ 2666 also and it was fast,got to about loop 8 just need to mod this pot some how.Ran full pot and could only get temps down to 105-110 with HS on,thanks for trying C6 you showed me the way,we can all learn from each other and improveQuote:
Originally Posted by l0ud_sil3nc3
yeah this is definitely going to be the a tough one to beat when it pops out! nice work mate!
trcd 9 loud, damn! :D
Was so close,im so unlucky 16.1-- ???? can I have a hug splave
http://s18.postimg.org/3l9umpsyx/image.png
Dude :D
that was epic fail
got it will post in 5 mins
bullant - 6:16:219 - 102x49 - 1326.4MHz - 6-10-6-28-90-1 - Gigabyte Z77X-UP5TH -G.Skill Pi 2000C6 4X2Gb/PSC - 2.1v -CPU SS -30 / Memory LN2 -105
http://s7.postimg.org/lm10eka9n/ddddddd.png
CRAZY RUN!! :up: :up: :up:
bullant
Congrats! I think it's WR?
Well done bullant!!!
Thanks Don_DanQuote:
Originally Posted by Don_Dan
Thanks,I don't know man,WR for memory? or 5Ghz you mean?Quote:
Originally Posted by MaJ0r
Thanks mateQuote:
Originally Posted by Alex-Ro
You did it :)
Yep!Quote:
Originally Posted by bullant
crazy run bullant :)
Congrats
A grand slam from you Bullant!
I tried 8GB's yesterday and total fail, like not one iteration passed sorta fail:(
killing it bullant. representin' 'straya :D
Awesome!
Thanks so much for the kind words guys,have learnt so much from you guys,seeing some great memory Overclockers subs in this thread and learning from them
problem here is you didnt get the exact right vdimm. no trolling, no jokes. those bbse are picky... once you dial in the right volts, they will comply. i have a similar issue with UP7. I have to fine tune it with the llc level to get it to play nice.Quote:
Originally Posted by Splave
yes, i do know exactly what sticks you are talking about... both George and myself have been able to do numerous 2600 passes 8-11-7 air. allen, want the "better" kit? 2650 8-11-7 air by myself and dino...
now that ive talked all this smack... time to not bench as work continues to consume all my time. hell its been a while since ive even posted.
Quote:
Originally Posted by ZenEffect
He is talking about the 6-9-7-28 @ 2654, not the BBSE Davis;)
I feel bad because I am pretty sure I gave him the wrong voltage (1.88v vs. 1.885), and I know it seems miniscule but that is just how that set acts.
Allen will have all of my good BBSE by tomorrow, so between him and I, I figure someone in the US will be able to get a decent run in with them on cold:rofl:
BBSE has been so fail for me, but I am going to try the 2200 c9 Ripx under cold and it they suck I am done. Who needs BBSE when you have 6-9-7 PSC:D
yeah BBSE very finnicky. BBSE might be the go if you can get them going at 1300 6-9-6. from memory 1250 was ok but 1300 was hard on my kit which is a lot crappier than zen's
oh my bad... guess you thought 6-9-7-28 @ 2654 was a hard thing to do (j/k) much props to Allen for trying to chase that down. i dont have the cash or time to even attempt it.Quote:
Originally Posted by l0ud_sil3nc3
try some 4 slot bdbg action under cold. ;)
dino, that kit has been collecting dust for a long time now :( no time to bench or try cold.
Thanks man, good luck with the 30 some odd sticks I sent man! Between us should maybe have 1 or 2 good ones. I refuse to by more bbse, too much trashQuote:
Originally Posted by l0ud_sil3nc3
I was able to get two loops to pass @ 1354 Mhz @6-10-6-28 tWCL6,will keep trying when refilled
Hey bull ant got any frosty pics? Love to see the 4 dimms frosty :)
Ahah,can't see them babies bro they to busy under ice all tuned upQuote:
Originally Posted by Splave
Do BBSE not play nice under 28 tRAS?
My chip IMC is real bad and chip can't hit 5GHz but I see you all running 28.
I haven't done any Pi tweaking since E8600 + D9 + REX or Biostar Tpower i45 days.
22 should be fine on good stuff
would happily collect it again off ya to borrow for a while LOL :DQuote:
Originally Posted by ZenEffect
Oh yes BBSE's are tricky... my kit above 1.85-1.86v is no go on air...happy they do 1333 8-11-7-22 tight at those volts...
Also mine HATE vtddr... 0.75 nothing more nothing less... Good thing they have no coldbug which makes it really easy to bench with...
Also with them all memory related voltages(vsa-vsio etc) need fine tuning in order to run properly...
Imho in order to bin bbse first make sure your cpu is up to it and then try fine tuning all your voltages on air to get them at at least 1300 8-11-7-22 with tight thirds.
After that geting them cold won't be that tricky...
Did manage 2 loops of 32M as well @these timings the other day too,will try again with memory colder and upon refill
http://s22.postimg.org/9kg1nc53l/image.png
up all night again lol
http://i.imgur.com/G0ULW1s.png
http://i.imgur.com/u3gHrgf.png
thanks Sam for the BBSE, what made me decide to try these under cold is the extreme amount of heat they were emitting in comparison to other kits, turned out to be a good hunch:)
pics in a bit. . .
Would never have thought that these 2200C9 would clock so well under cold given results on air.
I can ship you the reason(s) why I sold these, if you're willing to give them a similar treat :)
l0ud show us the 7-8-6 aida lol crazy
trying those cas6 2000 flare right now :up:
cas6 2000? or cas 7 FlaresQuote:
Originally Posted by Splave
2000 c6 flare no wazza and sloppy secondaries
http://i.imgur.com/Ugw5v7X.jpg
Strange PSC, not stable 8-12-8-28 1.92v -95c..............
2600 7-10-7 pass -50c 1.92v
2650 7-10-7 fail -50c 1.92v
2650 7-10-7 fail -68c 1.92v
2650 7-10-7 fail -75c 1.92v
2650 7-10-7 fail -50c 1.94v
2650 7-10-7 pass -55c 1.94v
2700 not possible to get stable passed 1 loop tried every combination. over -58c is immediate fail.
2600 6-10-7 55
2600 7-9-7 55
2600 7-10-6 okay
Very weird....
if those are the sticks i think they are.... 2nd's are a :banana::banana::banana::banana::banana: but can get pretty tight. and IF those are the same as I think they are, c7 2700 has been done on them already. watching this thread makes me want to run some 32m again... ive still got a few tricks and kits.Quote:
Originally Posted by Splave
Allen, I noticed in another thread that you believe the 3rd letter of gskills naming convention is irrelevant? did I read that correctly? if so, ive got a few xdt and one xdz that i need to try out. I think the only one ive tried was the early gskill eco which are xdt (literally looked last night.) psc + up7 has been extremely difficult lately with f6c bios. gotta try me an asrocket.
George, PM me ive got an idea and a means.
Not sure bro, they are l0uds he bought from you :) you have some insight on the hating cold?
S_A_V - 6:17:219 - 104x48 - 1250.6MHz - 6-9-5-22-72-1 - ASUS Maximus V Extreme - G.Skill F3-16000CL6D-4GBPIS 2X2Gb/PSC - 2.15V - CPU LN2 -40C / RAM LN2 -170C
http://img405.imageshack.us/img405/4...pi32m3770k.png
never benched the asrock so i couldnt tell you. they were running much colder than that on giga iirc.Quote:
Originally Posted by Splave
booom!
http://i.imgur.com/uOA0bPS.jpg
http://i.imgur.com/NySN8Um.jpg
http://i.imgur.com/rUs8Jml.jpg
http://i.imgur.com/QIBzBO6.jpg
http://i.imgur.com/2dmA0H9.jpg
http://i.imgur.com/AeBhkoC.jpg
http://i.imgur.com/sLiF1M8.jpg
http://i.imgur.com/7E2e9eV.jpg
probably my favorite pic
http://i.imgur.com/RhFEI9H.jpg?1
epeen screenie lol
http://i.imgur.com/KZ89S18.png
http://i.imgur.com/4T4p2Qm.png
awesome l0ud !!! gratssssssss great pics and results !!!Quote:
Originally Posted by l0ud_sil3nc3
epeen fully erect, sorry didnt answer my phone l0ud ttyt broski
http://i.imgur.com/PgFDqLB.jpg
Splave - 6:16:563 - 47x106.4 - 1277MHz - 7-9-6-18-60-1 - ASROCK OCF - Avantium 2133mhz 2x2gb/BBSE - 2.1v - CPU -45c // MEM -125c
18 more of these sticks to try :D they fail 2450 8-11-7 on air ;)
6min16 seems soo easy, even rejects do it under cold :D
trfc 56 passed a couple runs but was slower, strange could have pushed trefi harder but forgot woops.
So much win:bounces:Quote:
Originally Posted by Splave
Hey guys so I had 4 lrts of LN2 left and decided to test 2x2gb,would of liked bit more Ln2 to push bit more,think there still more in it,pretty close to my other time.
bullant - 6:16:328 - 102x49 - 1327.2MHz - 6-10-6-24-70-1 - Gigabyte Z77X-UP5TH -G.Skill Pi 2000C6 2X2Gb/PSC - 2.1v -CPU SS -30 / Memory LN2 -105
http://s22.postimg.org/3n6keyr5d/2x2x2.png
This one was even better
http://s16.postimg.org/ahdk846l1/2x2x2x2.png
^Show us TRCD 9 and I am sure you will beat your 4x2GB time with ease, hell your 2x2GB with above settings might do it.
Very nice as usual especially with only 4LT. My single stage should be showing up in the next few weeks so that will save some LN2, which means more memory to test under cold:)
I think the new goal we should be aiming for is 6:15.xx, before Haswell launch:D
last one until refill
bullant - 6:16:313 - 102x49 - 1327.3MHz - 6-10-6-24-65-1 - Gigabyte Z77X-UP5TH -G.Skill Pi 2000C6 2X2Gb/PSC - 2.1v -CPU SS -30 / Memory LN2 -105
http://s15.postimg.org/txtd1pyi3/313.png
hey bull so you can run 2700 with 4 dimm but 2650 with 2 dimm? or just run out of gas before you could push it
hey Splave,my .219 4x2gb run is at 2650 too,just the 2x2Gb can tighten up more,yeah the 2x2gb is more stable at higher Mhz like 2700Mhz.The 2x2gb seems as good cause I can tighten more.both 2x2Gb and 4x2Gb were both @ 6-10-6 2650Quote:
Originally Posted by Splave
Nice work on the tRCD 9 guys ^
^ my mistake :) is 2700 7-10-7 not faster? Ive never tried because my imc cant do it.
Yeah mate 2700 6-10-6 is faster but @ tWCl 6 its not easy to pass.The little test I did was about 8 loops but had to back of a bit on tRCD and tRFCQuote:
Originally Posted by Splave
trying some trident bbse right now
http://i.imgur.com/QbUyt4p.jpg
Just notice you said 2700 7-10-7,I didn't try cl7 was still on cl6.Im still using crap waza and no ram drive,you would notice on my 24 loop to value output is always about .100 of ,will have to work on it.Enjoy your benching I'm sure you will produce some nice results as always
seems this is not the best for 32m, maybe good 1m/PF or Im off on the vtt/sa combination that it wants.
http://i.imgur.com/bv0W8md.jpg
Youd think 7-9-6 twcl 7 or 6 would pass but not dice, kicking down to 2400 divider and adding some bclk they fail before the avantium. But maybe worth trying again in the future. Certainly not trash :X
testing l0uds epic bbse today thanks bro had a blast.
Splave - 6:17:500 - 100x50 - 1200MHz - 6-8-5-16-58-1 - ASROCK OCF -G.Skill Rip 2200C9 2X2Gb/BBSE - 2.1v -CPU SS -50 / Memory LN2 -155
http://i.imgur.com/vBH6Crr.jpg
Splave - 6:17:313 - 102x49 - 1225MHz - 6-9-5-16-58-1 - ASROCK OCF -G.Skill Rip 2200C9 2X2Gb/BBSE - 2.1v -CPU SS -50 / Memory LN2 -155
http://i.imgur.com/jehceIs.jpg
Couldnt pass 2600 anything really but thats IMC related must be because l0ud and I had totally different experience with this kit.
Rest is just fun
2800+ 7-9-6-18 (which was an accident forgot to lower mem divider)
http://i.imgur.com/Fcm1PiK.jpg
Pretty ballin' aIdA lol
http://i.imgur.com/GImzELV.jpg
never seen that before in 1m personally
http://i.imgur.com/nzQT3xe.jpg
^That kit is truly the red headed step child, PSC mhz, with Hyper timings + lots of volts + lots cold=win:ROTF:
Excellent work Allen would have never thought that kit could do 2800 7-9-6 and boot from bios at those timings, truly a special kit, I think that kit needs a bit more vdimm / right IMC and it is going to do some crazy stuff on Haswell:D
So much out of the box thinking man, just blowing my mind!
Indeed...insane kit right there Splave. Congrats on that random 2800mhz run :D
agreed, good luck tonight manQuote:
Originally Posted by l0ud_sil3nc3
You guys are going hard
Hard en the paint!Quote:
Originally Posted by bullant
BBSE is such a blast to run under cold man, even though it is much harder on the IMC, but I would have never guessed they could run so high mhz wise. What is the max vdimm on the Giga board Bull? Higher than 2.1v? Maybe time to give the UP5H a spin since it runs BBSE so well...
Setup ready to go
http://i.imgur.com/vRG4jDZ.jpg
randobin BBSE binning method per Splave, grab two sticks out of reject pile with eyes closed and bench, bench, bench:D
http://i.imgur.com/cjzXZQc.jpg
http://i.imgur.com/OS37Jy0.jpg
Didn't think you had a UP5, its 2.1v in bios,I've only tried 1 kit of BBSE on UP5 and it didn't even go well.It was a low end kit tho(1600 Mhz),im sure it run bbse nice tho .I really only use PSC on it,the correct imc,vtt volts is the key for up5,really the key IMO,this mite be also on most boards but I've only ever tested Gigabyte on Z77
^what do you use man, seems 1.103v is money on OCF
l0ud, the future of avantium is in your hands bro
the future is here:DQuote:
Originally Posted by Splave
So randobin Avantium dimms did not fail to please, sure there was no c6 twcl 6 action but considering these dimms would not run over 2400ish on air, I don't think the results are too bad.
best 5Ghz time
l0ud_sil3nc3 - 6:16:829 - 100x50 - 1300MHz - 7-9-6-18-68-1 - Asrock OC Formula -Avantium 2133 2X2Gb/BBSE - 2.1v -CPU LN2 -55c / Memory LN2 -150c
http://i.imgur.com/QRSODLv.png
Really weird though, here is a no waza run which was smoking fast
http://i.imgur.com/F16Yj5f.png
but every run with waza was sooo much slower, makes me think I am taxing the IMC a bit much or the dimms can't do it not really sure.
http://i.imgur.com/AvfETuc.png
nice sticks here, impressive runs Splave and loud! :clap:
l0ud_sil3nc3 which Vddr like it on air? I have BBSE, but their dislike Vddr over 1.84 at air and I don't know is it worth to trying with LN2 or not :confused:
If you mean vdimm, this kit needed 1.92v for 2400 8-10-7-21 with everything else tight and tWCL 6, so supper crappy in other words:rofl:Quote:
Originally Posted by MaJ0r
If you mean vtddr then, auto which in the case of the Asrock board is 0.764v.
I think if you have BBSE that gets to 2400 on air, then it is probably worth trying under cold, but keep in mind I needed -150c at the dimms for the above as even -110c was not enough:eek: