Printable View
Hey, my friend owns these sticks and I've heard that UCCC burns in(forget where though), so he primed and failed at 12 hours @ 280 2.56vDimm, so I told him to keep priming, then it failed at 25 hours, he is going to repeat this and see if it fails at a higher hour, this seems like some good proof that UCCC burns in, but can anyone verify this?
Anyone :stick:Quote:
Originally Posted by |2A|N
Well, I got my ram 2 days ago and it has been a headache every since.
I put the ram in, at stock speeds and voltages, and immediately had trouble installing windows. Finally got windows installed but half of my hardware wouldn't work and couldn't be correctly installed. Reformatted HD and ran memtest and I got error after error. I then switched out the GSkill for Corsair value select and ran memtest and got 0 errors after 9 passes.
So I sent the ram back to Newegg and hopefully the next set will work.
I also noticed that when I got the ram it had fingerprints all over it and the contacts, fingers?, had seen some use so maybe I got someone elses RMA.
Anyone?Quote:
Originally Posted by cloud_171
cloud_171: I think you might want to start by posting more information about your system and the settings you are using for your RAM such as VDIMM, all memory timings, divider, etc.
That goes for most of you here who are asking for ultimate timings without providing enough/any information for the experts and other users to help.
macg, you asked me the following:
I'll post when I have completed all my testing and everything is stable. :)Quote:
Can you post a screenie of a64 tweaker, DS/DDS and Vdimm please?
Quote:
Originally Posted by |2A|N
Ok im having unstable windows @ default ram speed lowered multi from 13x to 10x250 lowered 5xHt to 3XHT 2.6vdim 1.6vcore fail memtest first test and unstable what am i doing wrong? Specs in sig..
Will someone please explain why im failing all my tests such as SuperPI i fail Prime95 and Memtest within 10 seconds please.
Here is link to picture below was to big to post here.
http://img129.imageshack.us/my.php?image=grrr7bh.jpg
Set MAL to 9
RP to 7
TRC to 15
TRFC to 17
choose auto/auto for DS/DDS
and 2.6v vdimm Bios setting
That should be good enough :)
Got my new gksill kit but I seem to be stuck at 260 max when trying to overclock. Anything over that and it fails memtest at 40% every time.
My setup:
DFI LanpartyUT nF4 Ultra-D
AMD Athlon 64 X2 3800 at 2.6 ghz
G.SKILL Extreme Series 2GB (2 x 1GB)
Evercool chipset fan
SI 120 Heat Sink with NEUXS 120 mm Fan
PWMIC Fan (stock fan from the 3800x2)
BFG 7800 GT OC
X-FI Xtreme Music
Hitachi 80gb Deskstar, SATA II
Maxtor SATA I 165 gb
Plain jane dvd player
OCZ Powerstream 520
Ideally, I'd like to get back to 2.7 or even 2.8. Any help on memory settings for this kind of setup would be appreciated..I just seem to be stuck.
Also, for whatever reason, it also crashes out even when I knock it down to a 180 divider and try 2.7 :(
help?
Well, here i got 270Mhz 2.6v @ 3-4-3-6 1T
http://img206.imageshack.us/img206/9...034361t2lx.jpg
I pass more than 6 time Memtest with those set.
In the pic there is only 1test pass because that was the only picture a have taken :woot:
http://img115.imageshack.us/img115/6...t270mhz8xj.jpg
Thats Super PI 32M with those set :banana: :banana: :banana:
http://img115.imageshack.us/img115/5...034361t7jk.jpg
And that was my objective test, get 7000MB/s :toast:
Thats the way i use my PC:
G-Skill HZ 200Mhz @ 2.5-3-3-5 1T 2.6v
G-Skill HZ 250Mhz @ 3-4-3-6 1T 2.6v
G-Skill HZ 270Mhz @ 3-4-3-6 1T 2.6v
That's interesting Counter... Now this is prime stable also?
I don´t have time too teste Prime. To much work and don´t have the time to do certain things :rolleyes:Quote:
Originally Posted by BioVader
How much time i have to run Prime to say thats stable :confused:
At least 24hrs dual prime stable. :fact:
Well they finally fixed CPU-Z to read my cpu correctly. Here are my latest results. :cool:
this RAM is looking better and better
and its getting cheaper.
I just ordered a kit, might get a second if it turns out good
Has anybody over here already tested this 2 x1Gb G-Skill HZ's on an ASRock 939SLI32-eSATA2 board yet :confused:
This rather new ASRock budget-board seems to perform quite well,.. especially when you do all the mod's.
I'm asking because I'm planning to buy me one perhaps ;)
Check out which motherboard I'm talking about;
http://www.techpowerup.com/reviews/A...39SLI32-eSATA2
http://www.ocworkbench.com/2006/asro...-eSATA2/g1.htm
http://www.anandtech.com/mb/showdoc.aspx?i=2706
Most of this thread is about Ultra D settings ;)
I have the plain Dual Sata II w/these chips-- had them for about three or four months now.
(The latest bios fixes the 1T issue, for me anyway.)
My results are similar to most of the recent posters-- 260 1T /270 2T is the max for my kit. I really wanted 280 1:1 but it ain't happening.
5.3mb/s at stock, 7.2mb/s with overclocks and A64 tweaker is good enough, however. =p
These things are good, and very cheap.
Right now I'm running them DDR 500 3-3-3-7 @2.5v. Seems stable but haven't primed them.
Quote:
Originally Posted by rhalle
Could you post a cpu-z screeny, I'd like to see what you have running in your rig.
Bought these about 6-8 weeks ago from newegg, have trouble getting them stable even at 255MHz.
Works perfect!
270 is no problem thx to the G.S Technician :)
K just bought these 2GBHZ (0603) to replace the 3rd set of Crucial Z503's that have died on this Neo2
265, 3,4,4,8,1T 2.7V - no tweaks, just upped the FSB - BF2 STABLE!!!!!
the Z503's did 265 3,3,3,8,2T 2.8V until they died (they didn't want to post at 1T ever), so K R happy =D
will start tweaking for more soon
Thats not 270mhz 2T, it´s 270mhz 1T 3-4-3-6 2.6v very stable :slap:Quote:
Originally Posted by rhalle
Hi Counter CS,
Same here. I also have mine running 270 at 2.6v 3,4,3,6 1T
but I think the rest of my setup is holding them back as i'm still using a Neo2.
I would use my Mach II but I can't afford to replace anything if I blow it up.
So for the time being I'll stick to air cooling and lower clocks, It's more than adequate for what I use it for. The GSkill HZ memory is faultless and good value for the money.
Yes, I know. For me, however, 260 1T is the best I can do. 275 2T is the max for my particular kit/board. My rather spartan bios probably has something to do with it, although my RAM is operating pretty closely with everyone elses. :slapass: :p:Quote:
Originally Posted by Counter CS