Has anyone heard of any problems or tested the NEW version of Corsair GT 2000CL7?
Printable View
Has anyone heard of any problems or tested the NEW version of Corsair GT 2000CL7?
i dont think gary killed a single kit with an esd :PQuote:
Originally Posted by Yellowbeard
i dont think its behind us, the bad batches are deployed and some seem to live for quite a few weeks or even months before going belly up, so we will probably see elpida hyper kits with a higher than normal failure rate for some more time...
corsair did an excellent job though in pulling back bad stock, or possibly bad stock, so prevent as many rmas and customer woes as possible! :toast:
i think kingston and possibly others still have bad inventory themselves or at distries/shops that havent been sorted out, so for them this could be stretching over months...
visit the tradeshows ;)Quote:
Originally Posted by raju
http://www.ocztechnology.com/images/awards/gc6.jpg
CRISIS OVER!
i thought one of my sticks was dead, then i thought my classified ram slot was dead, then i thought it was the stick again...
a lesson to be learnt here is, dont eat your SILF over the motherboard!
http://majorlyenglish.files.wordpres...08/02/silf.jpg
:rofl: i told you those club sandwiches will give you a heart attack (just made that up eek)
Finding new ways of keeping it alive :)
http://img30.imageshack.us/img30/9715/memorycold.jpg
hah, good luck :D
i doubt it helps much though, i heard from 2 people who sub zero cooled their kits and they stilled died during a single session...
but it cant hurt :D
Sweet sticks you Raja, loving the cold i suppose :up:
cold tolerance varies from kit to kit, just like in the "d9" days ...Quote:
Originally Posted by saaya
:up: nice one raga, corsair on E657/8
show us the frequency :p:
my first Hypers had CB@-10 look like yours no have CB ?
No CBB bug on mine even with evap this cold. This is the new Corsair i5 kit.
First 10 mins were great 32M @ 2200 CAS 8-8-8-24 1N @ around 1.46V. After that though IMC got too cold and things got worse before I could really start clocking.
later
Raja
almost similar imc cbb with i7s?Quote:
Originally Posted by raju
Don't forget though that the i5's used now derive from an early stepping ;)Quote:
Originally Posted by Hondacity
about how long is the kingston rma-to-shipping process
With my faulty modules i was never able to run them @ 2000Mhz with 7-8-7-20-1T timings.. BSOD in linX what ever volts i would use all the time..Quote:
Originally Posted by Economist
The new (ic) modules are def fixed
http://img90.imageshack.us/img90/3225/pi2g.jpg
so i take it the kingston : KHX16000DULT1K3/3GX is Elpidia hyper ic's
and the : KHX2000C8D3T1K3/3GX is Elpidia BBSE?
i had one stick drop out after 3days 2000 7-7-7-20 1.68v
sent them back to kingston uk but now due to postal strike i still aint got them :mad:
they have told me there swapping them
Item #: KHX16000D3ULT1K3/3GX Replaced by: KHX2000C8D3T1K3/3GX
so which one failed KHX2000C8D3T1K3/3GX or KHX16000DULT1K3/3GX ?Quote:
Originally Posted by EvoCarlos
I was told the same about swapping those kits. I told them I like money better which I will get in a month or less hopefully.
KHX16000DULT1K3/3GX :yepp:they are also now discontiuedQuote:
Originally Posted by rusty
I had 6gb kit, ran 4 months and then 1 stick died.Quote:
Originally Posted by EvoCarlos
kingston is now sending out the new batch for rma's KHX2000C8D3T1K3/6GX
yeah i got mine yesterday but its only 3gb :) nout i got uses 6gb lolQuote:
Originally Posted by billdavis
http://i556.photobucket.com/albums/s...5092009515.jpg
there not as good as the others not by a long way
Why what is so bad about these kits? Perhaps different ic's on them? Care to explain a bit more.
dont get me wrong there not the worst setQuote:
Originally Posted by KILLER_K
but when benching with them earllyer they need loads of volts to run stable for vantage 8-8-8-20 i was touching 1.8v the old set were stable 7-7-7-20 1.72 but they did only live 4days from new lol
im still playing with the new so lets hope they go well past the 2000 7-7-7-20
i need to play with the subtimmings more
I got the older set back about i say a month ago, can't recall the exact date though. But i got the older batch number and i could hit 2,175 mhz with default timings and 1.65v with ease. But it seems my C0 chip and or my asus doesn't like each other along with the G-15 weird keyboard issues. So i stopped there with mine
so what speeds are you hitting with the new kingston kits? 2000 888 with 1.8v?
that could be samsung or micron as well easily...
Guys, need some help
I was wondering if the following kits are the famed dying elpidas
link here
7-7-7-20 1.74v b2b=31Quote:
Originally Posted by saaya
http://i556.photobucket.com/albums/s...6-4070copy.jpg
but it was not stable for vantage at tho's speeds had to up it to 8-8-8-20 1.8v it would prolly have gont thru @1.8 7-7-7-20 but never got the chance to test
also whats the best way to get the sinks off? hair dryer?