Sub 17s..... this is serious business for green side. That phenom seems to have a lot of headroom to improve :yepp:.
Printable View
Sigh been a long time since i used Everest, sad to say i forgot how you ran that benchmark and ended up running all the other benches and saving screenies before it dawned on me :D
Ingame bench Grand Theft Auto IV
Hello my name's Marco, I write from Italy.
Iocedmyself thank you for your great job :clap:
Do you tell us what graphic card have you used in your ingame bench GTA IV?
I have another question: what is the maximum temperature do you have for MAXIMUM LOAD in ALL 4 CORES? In example running Orthos or Prime95 for a few minutes...
Thank you a lot!:up:
Iocedmyself thanks for the GTA4 bench.
If possible can you sink the settings to this :-
http://bbs.52hardware.com/attachment...jZJk8hLRCx.jpg
This is a screen of an i7 @ 3.6ghz with 4870x2, with this we can make a point to point comparison oh an i7@3.6 to an PhII @ 3.6
Hey marco,
for gpu, using a 4870x2, stock clocks and cooling
Load temps @ 3.0ghz 1.35vcore are 34-35c in 23/24c ambient
Load temps @ 3.6ghz 1.3875 are 38c
And for comparison having voltage jacked way up past needed
Load temps @ 3.6 @ 1.6v are 46c
lo squartatore i allready asked IOCEDMYSELF to do a similar test against the i7 at 3.6Ghz
The best thing is the GPU is the same "4870 x2"!!!
Are you comparing this to the Q9550 result posted on Guru3D if so they used a different GPU 9800 GX2.
iocedmyself thanks for sharing, do you realise that if you post the benchmark results that ajaidev requested (welcome to the forums dude) that you will be one of the first persons not affiliated to AMD to post a DIRECT comparison with an i7, and all at Xtreme Systems
:cool:
Just like the old days, XS bringing the breaking news
:D
Look forward to seeing this comparison
:yepp:
Damn close, saving grace for Phenom II is that there is still headroom to overclock where i7 has been shown to have difficulty going past 3.6 on air, with 4ghz far out of reach :D
can you do the gta4 test again at 1280x1024 using 75Hz refresh rate? or 60/75Hz make no difference?
NB clock was at 2ghz
Btw regarding view distance in GTA IV it relates to how much video ram is used, @ 1920x1200 view distance of 32 takes Vram utilization to 984 megs i believe, which is orange warning for Vram load.
Using a 24inch LCD so RR70 would be best i could do, but doesn't make any difference as i don't have Vsynch enabled.
view distance is low so that limited video memory does not. GTA4 is very buggy when it eats up all the video RAM. So to limit the score problem with respect to ram the view distance was low.
Oh forgot the results are really great with respect to Intel QX series and does not do bad at all as compared to the all mighty i7's!!
iocedmyself thanks for sharing the results :up:
I wonder if the fps would go a bit up if NB clock was 2.2 or 2.4Ghz :).Either way very nice score for a Phenom II :)
lo squartatore read this:-
To check the performance of the CPUs, we use our "Promenade” benchmark. In this is, due to heavy traffic, many pedestrians and a far view distance, quite challenging for the processor and rather representing for GTA 4 since you will spend a lot of time on the street. Because we don't want to repress the frame rate too much, we use maximal details but reduce the range of visibility to 50 percent - a value reserved to graphics cards with 1,024 MiByte VRAM according to Rockstar's in-game presets.
taken from pcgameshardware.com
It has been said and rumored that 10-25 is what you would see in a typical console yes the xbox 360 and ps3.
The detail on the other hand is at 70 and is what counts.
3.0 ghz, 2ghz NB 2ghz HT 50 draw distance 100 detail distance 1280x1024
3.0 ghz, 2ghz NB 2ghz HT 70 draw distance 100 detail distance 1280x1024
3.0 ghz, 2ghz NB 2ghz HT 47 draw distance 100 detail distance 1920x1200
3.6 ghz, 2ghz NB 2ghz HT 79 draw distance 100 detail distance 100 car density 16 shadow density 800x600
3.6 ghz, 2ghz NB 2ghz HT 34 draw distance 100 detail distance 100 car density 16 shadow density 1920x1200