I was able to order mine along with the fans I needed :)
Perta's rules! 35 minutes from when the order was entered to when I got the email saying the items had been shipped.
Printable View
I was able to order mine along with the fans I needed :)
Perta's rules! 35 minutes from when the order was entered to when I got the email saying the items had been shipped.
There is an internal leak that the oring/gasket seals. This ensures that the flow is better directed over the copper. The nozzles decrease flow a bit, but you still gain a few degrees (at least with the 4.5mm nozzle on dual cores)Quote:
Originally Posted by peebee
Just as fast as Overclock-uk.com ;) Paypal makes it possible. :DQuote:
Originally Posted by Monk0101
That was just what I thought how it works. Okay thank you! Well, we will see, how it works. I am really interested, how much the flow will decrease from around 450l/h :DQuote:
Originally Posted by iadstudio
I flew over this thread, but I havenīt seen anybody testing them on a Quad!? Is that true? Or are there any results I can compare with, if the nozzles have arrived?
I hope, that it does not take so long with the shipment. I canīt wait to have them here :D
Well I my order from Petra's arrived today, along with a blue pen!! :D
I put the gasket in the main chamber and installed the quad split nozzle.
Got it all buttoned back up, now I just have to wait for the rest of my system to arrive :) I'll be putting it together this weekend.
Oh yes, Petra's does RULE on shipping speed! I ordered everything friday and the stuff from Petra's got here first :D
Ok, I've read all 15 pages, and don't know with nozzle should I use :shrug:
4,5mm for quads, righ? :confused:
Rbs
Umm no....Quote:
Originally Posted by rbsmontemor
I don't anyone who's tried the 4.5 on a quad...ppl have been getting better result's with the 4.5 and a dual core...
Everyone is using the quad nozzle for the quad some ppl are getting 1-2c better some are getting no difference at all
Thanks!Quote:
Originally Posted by disruptfam
I'll let you know if there's any improvements when I test it :up:
Rbs.
:wave:
That's 'Petra's rules' Monk. lol
For clarity's sake, the kit includes a rubber washer, not an 0-ring.
Before the kit was released a few guys used 0-rings and some used ones thick enough to increase bowing. However the washer in the kit does not increase bowing, it merely ensures correct flow within the chamber.
Hell yes, Petra's does rule! I ordered some replacement EK FC8800 thermal pads for my Ultras, some more MX-2, and some more Arctic Cleaner the other day from them, and the D-Tek nozzles were out of stock. I asked them to throw in a set of nozzles and add them to my order should any new stock magically arrive in the 5.38 minutes it took them to process my order. Alex wrote me a note stating that it took him a little bit longer than 5.38 minutes to get my stuff shipped out, but that he was able to find me a stray set of nozzles, which he threw in free of charge "for being so slow". :) This is why you should all buy from Petra's Tech. Who cares if someone else has the same thing for two dollars less. The level of service you receive from Petra's is unmatched. If all other companies were like them, the world would be a much better place. Petra's, if I ever make it out to San Jose one day, dinner's on me! :up:
Yeah, it's easy enough to be like that when a business kicks off, but to maintain that kind of service year out year in takes a special kind of folk. Alex and Quoc are all right in my book.
Seriously, the best part about Patra's is you can call them if you have to and they will give you a straight answer on stock, availability, etc.
Very rare place indeed!!!
Couldn't agree more.Quote:
Originally Posted by iadstudio
Just ordered some stuff from Aus and couldn't be happier.
For me its a win win situation. I get great customer service from the guys at Petra's and its cheaper than the crap that we get dealt with in Australia.
Cheaper and better :D :D
Thanks guys
And usually arrives to us in Aus faster than from Aus retailers.
That is the kind of service we get over here, overpriced and lazy. Though I have to admit, the service from GAM was very decent, pccasegear was terrible.Quote:
And usually arrives to us in Aus faster than from Aus retailers.
Yeah, GAM stands out for his support. Have seen him helping out new case modders with bits n pieces too. When you're unknown is the time that really helps.
Petra's is awesome ordered gear, received 3 days later nice!!!
Gam is a top bloke never had trouble with him... good service fast postage time's
Best service I've come across by far in Aus is with wade @ itsdirect.com.au :)
I get my gear the day after i order it...sometimes even the same day!!!!Even if he doesn't stock something he's happy to bring it for you no worries.
It's like having my own personal computer store.. haha
I am using the "quad" nozzle on my quad core E6600 G0 running at 3.8 ghz and the temps under load went down about 2.5 C which is pretty nice imo. I cant speak about flow restriction. I have no way to measure flow that will reproduce the same results every time.
That's good to know :)Quote:
Originally Posted by warbux
Thanks
:wave:
Isn't that Q6600?Quote:
Originally Posted by warbux
I just ordered from Petras. looking forward to receive it soon and test how much it could bring down my q6600@3.75G, now is 60 at full load
Some say no diff but others like me see a 2-3° drop. I'm wondering if either B3 or G0 stepping responds differently.Quote:
Originally Posted by denden
Could also be a difference in the TIM. Cure vs. non-curing (AS5 vs. MX-2).Quote:
Originally Posted by Jedda
Quote:
Originally Posted by Jedda
lol yea fat fingered it sorry.
It may turn out we don't see much of a temp difference at idle, but more of a drop under load? I do think the rubber washer, diverting more flow toward the block would have to help.
Ya have to remember the price too. :up:
Not a huge investment.
If you happen to making a new loop right now, I would say go for it for sure.
If I had an existing loop and didn't want to break into it, I wouldn't worry about it too much.. ;)
If you want every last C, just the fact we had 1 or 2 good reports posted, would probably get me to roll the dice.
That is how I see it so far, for whatever that's worth... :p:
Exactly, it's so inexpensive it's worth a try... As I'm building a new loop, there is no reason to skip it :)