Printable View
Patriot 1GB (2 x 512MB) PC3200:2-2-2-5 PC4800:2.5-4-4-8
well about timings i wanted to see how far it clock first then i was going to test on memory timings
:D hehhehe really what scores should i be getting on DDR600 ah man feal so stuped here hahahaha i will do more testing after work today ill try what you said
try using mem default timmings at 1t at 280x9 with 3X with the ram set at 2.50 volts and go into memtest and run test#5 and tell me how many errors u getQuote:
Originally Posted by ATT
Quote:
Originally Posted by sideeffect
YOU da man :toast:
Quote:
Originally Posted by msimax
run a 22 minute session it passed 20 times test # 5 Memory divider is set to 200MHZ for all 1:1
FSB 280-DDR560 2.5 4 4 8 T1
http://s91195506.onlinehome.us/FSB 2...5 4 4 8 T1.PNG
FSB 280-DDR560 2.5 4 4 8 T2
http://s91195506.onlinehome.us/FSB 2...5 4 4 8 T2.PNG
i finally hit both 300FSB and DDR600 on memory but scores are lower then my other post above :( FSB 300-DDR600 2.5 4 4 8 T2
with T1 it gets to the log-in screen when i press OK and it blue screens
http://s91195506.onlinehome.us/FSB 3...5 4 4 8 T2.PNG
Quote:
Originally Posted by Goone
yes I've got one. What do you want to know about it?
in memtest does ur errors happen at 500mb upwardQuote:
Originally Posted by koosjebram
ATT try 7-3-3-2.5
Sideeffect:
I am using the TCCD edition of your v1.C Mod bios. After getting 2 gigs of ram I decided it was time to try a new one, and it has worked great for me :)
This is what I am currently running at using it
I just had a quick question about this bios, and I did not see any mention of it anywhere.
No matter what I select in the bios, my system always wants to do a slow memory count on boot. Is this a 'feature' of the bios? Or am I loosing my mind, and cannot see the option anywhere :) Thanks!
Its the same in all Bios files after 1.8. Quick boot option doesnt work so the memory check is longer than pre 1.9.Quote:
Originally Posted by Aleister
Its a MSI fault and not indigenous to just my bios. Possible workaround is to enable Full screen boot logo as that seems to bypass the elongated memory check.
well i think i hit a good balance between latency and MHZ/speed
2.5 3 3 5 1:1 9X278 HT 3 now of to memtest to check for stability ;)
http://s91195506.onlinehome.us/1.PNG
sorry for massive pics :D
if requested ill delete them
I have an Opteron 146 waiting for me at home, and I was wondering how many people have had good luck with SD cores on the Neo2. My venice works awesome and I hope that the same will go over with my Opteron. I am digging the 1mb cache and if its a 0540 chip it looks like most of them are doin 2.8-3ghz on air and with 1.4V or so.
@msimax reply:in memtest does ur errors happen at 500mb upward
Yes i'm quite sure(not 100% will check)
If you'd like to know i tried all standard/modded bios 1.36/1.8/1.c/1.b
(pretty much every bios modded by the guys here at xtreme thanks b.t.w)
Also tried setting timings in a64 tweaker and then using divider.
Volts got up to 3.6/3.7 with not a single mhz clock higher.
Slots 1/2 booster in 4
Any advice??
(tested errors always high numbers in memtest5)
my Opteron 146 0540 CABYE + msi k8n neo2 54g :Quote:
Originally Posted by Rickster_64
default voltage :
http://img10.imageshack.us/img10/922/result16bk.th.jpg
with voltage +3.3% i can get stable 2900mhz. So this one does pretty good on my neo2
But one strange thing when i go higher then HTT300, multi 10x (3000mhz), i get a instant blue screen @ Windows when i run superpi or another stress test program, no matter what voltage i give. So im still testing to get this CPU over the 3ghz :)
Culex44,
So it does fit the msi neo2, was looking to buy the TT Big typhoon but afraid won't fit.
Thanks
what BH5 are you actually running ?
just cuz its BH5 don't mean its a good set of ram you can actually have some bad ram.
put your HTT multi on Auto and try.
also try 2.5
If its the new stuff like the Mushkin or OCZ then be warned its not BH5 its UTT which is NOT BH5 that stuff is VERY sensative to voltages. and by going up to 3.7v you may have just killed the ram.
if your having issues getting above 250mhz then its either 3 things/.
1)
a really crappy cpu that cant handle that high of speed drop the cpu multi down 2 steps and then try
2)
really crappy ram... i mean that too like really crap ram you may want to think about RMA'ing it. If its the OCZ PC4000 VX rma it right now that ram is some serious crap ram and shame on ocz for releasing such crappy ram .20 v over and it will die...
the mushkin stuff is the same its very sensative VERY sensative and there are tons of people on the Mushkin forums complaining about the ram running good one day and the next its dead for no reason.
3)
you have one of the early rev's of the NEO2 boaard with the 250mhz bug and my friend there is NO fix for that RMA the board or junk it and go get another one or a dfi agp board.
no matter what BH5 ram you have 250mhz 2-2-2-5 you should NOT have to go over 3.4v 3.5v MAX for 250mhz if you have to go higher DONT all your gunna do is hurt something
the problem is that some bh-5 sticks just dont work fine with the neo2. my bh5's max = 218mhz 2-2-2-5 no matter what voltage and settings.
in the dfi ultra-d at my work they do 240 easy.
yeah but is that the same CPU, PSU and so on ?
the NEO2 was made long before the TCCD ram was infact BH5 was VERY popular when the NEO2 was made.
240 with BH5 is pretty :banana::banana::banana::banana:ty man, you got some bumb sticks there or your cpu at work cant handle the speed.
seriously 240 with bh5 is prety poopy.
the NEO2 handles BH5 just fine. It handles Mushkin Redline PC4000 and Corsair XMS oldschool bh5 just fine for me and my board was even an old one.
The board may be the issue id seriously look into getting a newer one or rma'ing the board
????
2of the same problems mixed up????
I have geil ultra-x pc3200 utt or new bh5 as they like to call it
most people say it was tccd first and then bh5.
It just wont run.
Without booster it didn't even booted t'ill i set drivestrength to weak
I've read about 3 quarters of this thread and a lot of other forums
and i'm seeing 50/50 with same problems or running fine
NO SOLUTIONS YET!
Please help
(b.tw. is utt the same as bh-5 in the sense that it won't boot at cas3??)
Hello,
I have some different problem , I use right now 1c tccd SE mod bios, but this not important now.
I was stupied and I change the MAC adress on the NVIDIA nForce Networking Controller in BIOS, sow now I have FB FF FF FF FF FB and card not work :(
It's possible back to the my old MAC or what can I do now to bring a live this card??
Please help :)
BR\
Rafał
Which stepping is it exactly? 146 CABYE 0540 FPBW or other? I'm waiting for a 146 CABYE 0540 APMW and I don't find any oc of this steppingQuote:
Originally Posted by Nossie
Goone-> Big typhoon fit on this board but happy to have a wavemaster case with possibility to get out the board to install this enormous cpucooler. I process a blow hole in the panel cause the fancooler is near of the panel as you can see on this pictures:
http://img213.imageshack.us/img213/2...dium5nk.th.jpg
http://img213.imageshack.us/img213/6...dium3cs.th.jpg
http://img213.imageshack.us/img213/2...dium5cw.th.jpg
Question.......... My OCZ Gold PC4400 had no problems with HTT over 300. Ever since I switched to OCZ VX and added the DDR booster my HTT is very limited, regaurdless of ram timings or divider. It will not post with HTT above 270ish. Any ideas? :confused:
its a 146 CABYE 0540 FPMWQuote:
Originally Posted by culex44
get the same feeling here!Quote:
Originally Posted by Lestat
Just goy my 175 opty today - had a little try OC and no joy with less than 1.4V so waiting for the A8N32 (which I was planning to get anyway) and move onto the NF4 and give this mobo to my son.
Hi! its my first post here
actually it is my first post in the forum.. sorry for my bad english.
well... I had a lot of question answered by this topic so far
first of all I want to thankyou guys for every information here :)
Im using the sideeffects modded bio 1.c for tccd cause I have 2x512Mb hyperX ulk2 memory and it looks pretty good. My Venice is not the best one for OC.
I got only 9x290@1.55v with a Zalman CNPS7000.
anyway.. the question is
I Have only a Raptor 74gb plugged on sata3 port.. and a DVD-R on IDE1.
every setting on the BIOS about Raid is disabled
But even so I got a screen where it appears "Nvidia IDE Raid BIOS 4.xx - looking for array..." (something like that)before loading the winXP.
This really bothers because it tooks about 10-15 seconds on this screen.. almost the same time I used to have to boot up all system on my old rig (s754)
I´ve tried to enable and disable every kind of settings but it didn´t work.
Does anyone here know what kind of silly mistake I am doing here?
Or maybe its a bug from sideeffects BIOS? or.. its a sideeffect from his BIOS? ehhe
Thank you every one who read this.. I hope you understand what I am trying to say
[]´s
Thanks, enabling the full screen boot logo did the trick :)Quote:
Originally Posted by sideeffect