I received my board from mwave as well. Other motherboards I've purchased have been laid on a bed of foam.
I also noticed that the board was made in China...not surprising really, but I'm a little leary of quality control. The other motherboards I've owned (Abit, Epox, Albatron) have been manufactured in Taiwan.
Taiwan is the worst place to make electronics. every appliance i had that broke had "Made in Taiwan" on it.
Anything guys?Quote:
Originally Posted by SLi_dog
Thanks Rodney BTW :p: :D
Just booted up a brand new XBX2. Even at stock settings the NB sink is darned hot. I cant touch it for more than 30 secs :eek:
Is that normal? The mind boggles at how hot its going to be when I start to OC ;)
It shouldn't be. Did you change out the thermal pad on the heatsink? If so, make sure it's making some good contact. Mines very very cool to the touch on stock. So, something is definitely wrong. But maybe that's because I threw some AS5 on mine.Quote:
Originally Posted by WillyWonka
:eek: :eek: :eek:Quote:
Originally Posted by Reinvented
Nope I havnt done anything to the NB heatsink.
I did use it as a "handle" to help manoeuvre the mobo into the case. I later saw in the manual that Intel says NOT to do this in order to not damage the NBs TIM ;)
Perhaps I have damaged the NB TIM ... it really is very hot. Although if I damaged the TIM the heatsink should actually be cooler i.e. heat isnt flowing from the chip to the heatsink as effectively. In that sense a hot heat sink is a good sign.
Should I take off the NB heatsink and redo the TIM with AS? :confused: i.e. have others found the stock TIM to be poorly applied.
The CPU itself seems to run fine at stock ~ 45*C with an Artic Freezer 7.
replace the TIM as sucks anyways atleast for overclocking.
Hi
Just picked up a Q6600 for my BX2.. one issue so far:
I`m in maintenancemode, but i can`t find how to disable "watchdog"? Where is it?
I suggest using the 2333 bios instead
That`s the one I`ve got..Quote:
Originally Posted by Supertim0r
So there is no watchdog in that bios?
The watchdog didn't appear until after 2333 so you're fine.Quote:
Originally Posted by Nightprowler_77
here is something interesting:
I have the XBX2 with the E6600, I'm overclocked at 3.4. My idle temp were always around 44-46 and my fans were always a little loud. So, I went in BIOS and disable all the fan controls (CPU and system fan control). Then I noticed that one of the fans wasn't running constantly anymore, and my temp dropped to 40-42. Also the full load temp are never beyond 56. My case has 2 fans, rear and front and my CPU has the Tuniq Tower on top of it. I have the Tuniq fan set to max, but honestly I'm not sure if that's the loud fan that comes on once in a while, I can't figure it out. The interesting part is that the loud fan seems to be kicking in only when I launch Internet Explorer. I tried tons of other applications and it seems that only IE triggers it. It stays on for a while and then it goes silent again or maybe it just spins at a lower speed, not sure, but my whole rig is quiet then.
Any idea guys if this is normal? Should I let the CPU and the system control the fans?
So far I`m at 3.150 ghz with my Q6600. Prime stable 4 hours def vcore.. in XP..
I decided to instal Vista 64, but during the instal I got random bluescreens. :stick:. i tried running everything at default, but still bluescreens during instal...
Is there a known issue with B:confused: X2 and Vista
Did you flash the BIOS to the latest BIOS version ? the latest included many fixes for the Vista issues.Quote:
Originally Posted by Nightprowler_77
I`m still at 2333.Quote:
Originally Posted by Xilikon
Maybe I should check out the latest bios then. What tool should I use to upgrade bios in windows?
When are we gonna get usable multipliers other than the default one?
Never. This is an Intel board. If you want unlocked multipliers, buy a Extreme Edition processor :rolleyes:Quote:
Originally Posted by badboy
guys my SB on my XBX2 is getting pretty hot.. is that normal?
Just download the 2692 BIOS in the .EB file extension direct from:
http://downloadfinder.intel.com/scri...ndent&lang=eng
Run it right out of Windows, like I did.
Andrew
Quote:
Originally Posted by Nightprowler_77
New IDCC for Vista 32-bit.
http://www.intel.com/design/motherbd...c/download.htm
Too bad it doesn't work. :rolleyes:Quote:
Originally Posted by theonlybabyface
in my desparation i tried it with my xp64. weird thing is that i was even able to install it, unlike to xp32 version. to start it was a different thing though. :(
no others monitoring programs running ?Quote:
Originally Posted by theonlybabyface
cpu-z, everest ?
right click the installation icon and run it as administratorQuote:
Originally Posted by theonlybabyface
anyone?Quote:
Originally Posted by horatiub