Come on post the clocking ;)
Printable View
Come on post the clocking ;)
Anyone seen this stepping: ccbbe 0615mpmw ? Is it a :banana::banana::banana::banana:ty stepping or is it the rest of my hardware thats stopping me?
My 185 is a CCBBE 0613MPMW and it does 3Ghz on stock voltages. Granted it starts at 2.6Ghz stock, but it seems ours were just maufactured at different times.Quote:
Originally Posted by LIKMARK
I got that stepping too, and it suxx :stick:Quote:
Originally Posted by LIKMARK
2,6 ghZ with 1,4 volts
Hi everyone. I wanna brag about my opty too after seeing all of yours.
Opty 175 3081 MHZ 1.312V The infamous CCBBE 0617 EPWM
DFI Expert
7900GT's in SLI
Ambients 71-72F
http://i125.photobucket.com/albums/p...rla/MyOpty.jpg
My cooling
http://i125.photobucket.com/albums/p...a/IMG_0397.jpg
mmmmmm, i think i hit 3.37 on 1.52V . But i bought a QX and was messing with it for a while. Sold the QX and went back to this baby. I honestly i like to keep things chilly. BTW im half debating on dropping my TEC that i pulled off the QX onto this rig. But, time is not letting me get around to it. :T
:toast: Wow, sweet OC for a 175! :clap:
whats really funny about my CPU is she doesnt like 1.45V She either likes it lower then 1.4 or higher then 1.5
I have no idea why... but as you can see, any chip that oc's to 3.0ghz on stock voltage is thumbs up for me.
But yeah... anyone else with a CCBBE 0617 EPWM should test this theroy.
I fail at 2.9ghz on 1.4V incase your wondering. Its REALLY REALLY wierd. And on stock voltage i'll prime for hours and hours at that clock.
Well got a LCB9E 0652WPMW.
Will install tonight and see how it goes ;)
My Opty 185 has so far OC'd as follows:
Stock 2600 @ 1.3v
OC to 2733 @ 1.3v
OC to 2880 but needs 1.35v to startup and 1.42v (5%) to pass Prime testing.
Full load (two FAH clients running) temps are about 50c.
Well currently Orthosing at 2.6GHz (260 x10) at stock voltage, temps with the XP90C are 50/57 C full load. I think I need to get that Tuniq Tower ;)
But so far so good.
2.7Ghz passed Orthos at stock volts for 14 hours, but them locked up when I opened CBID and Coretemp at the same time :confused:
Any idea chaps?
what priority are you running orthos under? 1 or 10?
@Draxx - CoreTemp is still beta 0.94 and there are reports of lockups and random reboots in their forum, I had a few as well mainly if I left it running in Systray but also when using CBid & CPUz.
I normally Orthos using Blend test @ Priority 5.
Only 1 at the moment mate, just doing basic testing, S&M first thing when I get home from work ;)Quote:
Originally Posted by bt_medic04
I as well get random reboots while using core temp 0.94 and cpuz 1.39
312x9 = 2808Mhz stock volts
prime95 25.1 dual core edition 53 hours blend stable (I was away for the weekend)
35/36 load temps
water cooling cather's G4
Make sure you use 9 or 10 priority ...Quote:
Originally Posted by oarsome
Well I'm happy its stable at 2.7Ghz 1.33v. Did about 5 hours Orthos priority 10.
Quote:
Originally Posted by NaeKuh
Try running @ priority 10 for more than 8 hours, keep us updated! So far looks promising!!
A third 165 added to my collection
LCB9E 0704XPMW
Will see what she does starting this weekend
Smiffy
CCBBE0610 hit 3050Mhz on 1.58v.
Can't wait to see how it goes! :toast:Quote:
Originally Posted by Smiffy
Warmin it up a bit
2100Mhz on 1.250v
Smiffy
Is that the best speed you can get at 1.250v yet? And is that on stock fan? Can't wait to see how this new 2007 variety performs on a nautilis...Quote:
Originally Posted by Smiffy
Opteron 165 CCBWE 0633 XPMW is not very good, 2600mhz @ 1.4v max
boxed cooler.
Unfortunately the temp sensors are broken so this one is going rma. (:
Which E-tailer shipped out that stepping?Quote:
Originally Posted by beverced