Quote:
Originally Posted by Hoss331
You sure? That was the problem with F6b. Enable either raid or ahci and it would freeze up. I am running raid and I am not having that problem with this new beta.
Printable View
Quote:
Originally Posted by Hoss331
You sure? That was the problem with F6b. Enable either raid or ahci and it would freeze up. I am running raid and I am not having that problem with this new beta.
It runs great for me not using ahci, just run 25 runs of linx and all okQuote:
Originally Posted by Hoss331
will test out the bclk later
Running Bios F6c now. No issues so far.
Latest Easytune6 won't clock bclk though. Not sure if its my tweaked xp os or what.
OCM :up:
Just switched also to f6c, seems the same so far.
Quote:
Originally Posted by ProStreetCamaro
Quote:
Originally Posted by C-N
Yea it runs fine in IDE mode, but when I tried ahci mode at a couple different clocks and they all froze shortly after post. Also my bclk didnt change either still only goes to mid 104s, this is with F6d.
Sounds like a bios issue, Is this only with the f6d ?Quote:
Originally Posted by Hoss331
yea only with f6d, never tried f6b
What version have you ever seen be able to change Bclk? If you have one please upload, all the ones I've tried don't even show a Bclk section/Quote:
Originally Posted by OC Maximus
Thanks
The ET6 that came on the cd is able to adjust bclk and the version im using now (B10.1228) is also able, its listed under Frequency.
All Easytune's should be able to adjust blck, I think its more bios related..
Latest ET6 B10.1228.1 no problem at all.
http://img818.imageshack.us/img818/8...0121133143.png
I am using that version, and all others I've tried in the past didn't have it either :shrug:
http://img823.imageshack.us/img823/402/nobclk.png
Maybe it's the windows? Not sure if I have all updates installed on it or not, or .NET Framework (Does it need those)?
Windows Welcome/loading screen also takes forever on the new BIOSes? This shouldn't happen because the BIOS has already handed off the board to the OS, but it does because I went back and tested an old BIOS to be sure.
Someone else mentioned that here or at TT, but I can't find the post to quote them now.
Yep, thats exactly what mine looks like on my tweaked xp os. Works fine in full OSes though.
OCM :up:
Thanks, must be a windows update or NET Framework needed then, this is a clean install but one I used for my C300 review, it's not tweaked or stripped, but no updates installed so I think that might be it.
I had installed .NET Framework 4 and SP1(this pic is Win7 X64).Quote:
Originally Posted by Lsdmeasap
Yeah,BIOS loading in Windows is too slow,but latest F7e it's also much quicker to BSOD on an unstable overclock.
Well I installed the first four 3.5.x .Net updates and if I hover I can see it now, and move/adjust but it doesn't apply.
So you think I need SP1? I am not offered .Net 4 in windows updates? I haven't installed all the other security updates yet though, or reliability, so maybe it needs those reliability ones?
I think the BIOS loads fine, it's just after that, it's causing the actual Windows Welcome screen to sit there for a long time. I only see this on the latest F7e, the one I used before that it doesn't happen with (F7d)
No SetFSB for P67 yet?
+1Quote:
Originally Posted by Lsdmeasap
OCM :up:
How do you enable Hotkey in EasyTune6?
OCM :up:
Ed it doesnt work in XP mate :(
you have to change OS......edit that looks like W7 lol wtf, i am using that version of software without issues /..... odd
profiles dont work at the moment and are not really needed with SB, you can basically max out the chip at whatever clock you want for all benchmarks lol
Ya Dino it is Win 7 x64?
Trying to install SP1 now to see if that will fix it, if not I'm gonna try the latest .Net if it will install (Not offered in windows updates, only 3.5.x)
strange...
on my ud4---
i set 100*48 and 1.410v(bios) 1.380v real...
after 5 minutes of prime95... i see my multiplier down to 36x
on bios all downclock downvolt function are disabled...
PS: last bios posted by dinos...
strange...
it's getting too hot probably and speed throttling man as i am just testing the new bios now and all is good at my usual 4.5 settings
What gives? :D
Installed .Net 4 and still no luck! I know SP1 is not required for easytune, I'm lost.
I guess I'll try a clean install, which this basically is anyway, if that fails.... Grrrrrrrrrrrrrrrrr
ICS 9DB403DGLF Clock generator not yet.:rolleyes:Quote:
Originally Posted by Lsdmeasap
Ya, I bet he makes it paid version too when he adds it :(