Guys, help me please with RAMs for Thuban, i need "good" 2x2GB Rams but not much expensive (bc. new board from Giga is a bit expensive :-) )...Min. 1600MHz+ cl 6 (at tweaked mode). 125-130$ is my limit :-/....
Printable View
Guys, help me please with RAMs for Thuban, i need "good" 2x2GB Rams but not much expensive (bc. new board from Giga is a bit expensive :-) )...Min. 1600MHz+ cl 6 (at tweaked mode). 125-130$ is my limit :-/....
I suggest this kit:Quote:
Originally Posted by FlanK3r
http://www.newegg.com/Product/Produc...82E16820227496
After SPD flash to CL7 edition, it's maybe worked better.
Also look this model:
http://www.newegg.com/Product/Produc...82E16820231321
My C8 ocz's flashed or not , have issues with c7 much less c6.Quote:
Originally Posted by OgaiB
Thanks, I'll try that when I get the chance. I suspect it is my CPU's IMC that is holding me back more than anything else right now, but a new BIOS might help . . .Quote:
Originally Posted by Cele303
update: I haven't really stretched the RAM yet, but that BIOS update bought me an extra 150 mhz at the top end on my Athlon II x4 635! I can get it stable at 3.85 ghz now rather than 3.7, at least when the cores are isolated anyway. Will probably shoot for a unified cores/nb/RAM overclock at around 3.8 ghz.
Just read that Elpida and Samsung are starting to make 4 gig sicks of DDR3 Ram
http://www.digitimes.com/news/a20100326PD218.html
Hi guys,
I`m reading this thread for beginning, and I know, that probably the best sticks for AMD are GT`s, but I can`t afford it. What you`ll choose from this ones:
http://www.newegg.com/Product/Produc...D4GX3M2A1600C8
http://www.newegg.com/Product/Produc...2800CL9D-4GBRL
or maybe something else for 150-170$?
CPU will be 955BE or 1055T (depend on price of course). With MB is a problem, lot of stuff coming out soon, right now choice is:
-Crosshair III
-GD70
waiting for 890-GD70 and Crosshair IV.
What you think?
what do u think about this modules (photo original, i can buy for good price...)
http://img03.allegroimg.pl/photos/or...5/90/978059041
Get what you pay for.......At 1600 c9 they hardly belong in a thread titled "BEST RAM FOR AMD" however, more like Budget ram for AMD.
I have those sticks Flank3r and i've struggled to get 8-7-8-22 at 1600.. and that is with 1,8v. Indeed you "Get what you pay for" so my advice is to get something better.
I just started testing these Corsair Dominator GT 2000 CL8's, first boot!:)
http://i6.aijaa.com/b/00086/5983283.png
Has any tried this set out or know of a site that has a review on them?
CMD8GX3M4A1333C7
Corsair Dominator 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666)
http://www.newegg.com/Product/Produc...minator%201333
I have those sticks. They should pull 6-6-5-15-11-1t with the tightest subtimmings at 1600 stock volts nicely :) As chew said you get what you pay for lol ;)Quote:
Originally Posted by Asmola
i just started testing these 2000C8 dominators aswell, so far i've gotten 32M pass with 7-6-7-18-24-1T @ stock voltage, havent tried lower yet.Quote:
Originally Posted by El Gappo
but it seems like there is some 'wall' , tried 85x mhz 7-6-7-22-34 @ 1.7V even, and it wouldnt pass.
admitely, there are 1000 more options in the bios / amd overdrive which i dont know to well yet.
http://www.thijskramer.nl/tweakersdo...-76718241T.png
perhaps anyone sees something that is set to 'tight' besides the 7-6-7-18-24-1T thingy? as mentioned, tried up to 7-6-7-22-34 with 1.7V but 32M didnt pass then either.
1.7v to much.........not needed for those speeds play with memtest and you will note more voltage = errors.
Shouldn't need any volts till 1720+ also if thats gigabyte use the white slots.
Alright, thanks. i will use the whit slots aswell. will fiddle some more, and later on with singlestage, on stock cooler right now!
Thijs, something must be off. You should be able to pull off at least 1700 6-6-6 at 1.65V with these sticks. Set primair timings to 6-6-6-18 trc 24 and trfc 120ns and leave the rest at auto, that should do.
Anyone have any experience with these sticks: http://www.newegg.com/Product/Produc...82E16820231321
I read a review of them and they do really well for being low voltage sticks. Basically was able to get them up to 1946MHz 6-9-6-24 1.55V. Pretty solid if you ask me.
Thinking about a set of these for my new Crossfire IV Extreme or MSI 890FX board.
Link to review
Those might look good on Intel, they're pretty useless on AMD. Running trcd @ 9 on AMD is a sin.
i've gotted 836 7-6-7-18-24 1T @ 1.65V so far.
Also got 824 mhz 6-6-5-15-11.
but i cannot boot higher then 830 / 840 mhz :/
2000MHZ on AMD should be possible soon
and it looks that motherboard has something to do with max mem speed ;) but will see how much :D
Can anyone tell me the difference between these two sets?
http://www.newegg.com/Product/Produc...82E16820145224
http://www.newegg.com/Product/Produc...82E16820145295
The first link is to the C8D's and the second link is to the C8's, but I am not sure if there is a big difference.
Fiddling with the singlestage for a bit now, 900mhz 7-6-7-18-24-1T is obviously 1M stable, but not 32M. tried 2T aswell, and 90 or 110 Rfct , but that didnt help either. ill check if a bit more voltage helps.
FXTA-UD5 isnt to bad so far, booted up at 280HTT :)
yes, i heard somethink :)Quote:
Originally Posted by Dumo
Highest result so far, still working on it, does more cold ( -40 to -190 ) help in mem mhz? or moves up the imc limitation?
So far i've used 1.3V NB and 1.68+- Vcore on the dram. i think i got some improvement going from 1.26V to 1.3V NB, but at 1.3V the GB bios started flashing with red that the voltage was high, being a amd noob, i wonder, is it to high, or can i get it up to 1.4V safely?
Best one so far, if anyone has any tips or comments, please say so, im all ears!
Highest 1M so far was 912, but i think i can push that a bit higher, same goes for the 32M.
http://img443.imageshack.us/img443/9...3nb168vsma.png