Which manufacturer is going to be ready with 5850/5870 blocks?

Printable View

Show 100 post(s) from this thread on one page

10-23-2009, 04:52 AM
WaterFlex

Copper does more performance but has less corrosion resistance? Nikel does less performance but has more corrosion resistance?
I think this block is good http://www.aquatuning.de/product_inf...70-Nickel.html

I have Feser One coolant btw :up:
10-23-2009, 09:16 AM
SimpleTECH

My EK block seems to perform fairly well.

Just did a test using the Heaven demo under DX11 and my GPU temps never exceed 32C. VDDC temps ranged from 40-43C.
10-23-2009, 09:23 AM
leo_bsb

Quote:

Originally Posted by SimpleTECH

My EK block seems to perform fairly well.

Just did a test using the Heaven demo under DX11 and my GPU temps never exceed 32C. VDDC temps ranged from 40-43C.

Good to hear that.
Until now I'm waiting for the new version of the Koolance block, it has the best looks IMO. Dean told us that the current version has better contact that should leads to better performance.
10-23-2009, 12:07 PM
ChielScape

Quote:

Originally Posted by WaterFlex

Copper does more performance but has less corrosion resistance? Nikel does less performance but has more corrosion resistance?
I think this block is good http://www.aquatuning.de/product_inf...70-Nickel.html

I have Feser One coolant btw :up:

the nickel plating on the copper is so thin it wont hurt performance. what the cover is made of doesnt matter, so all 4 versions will perform the same. IF you have aluminum in your loop, i'd strongly recommend either nickel one, but if you dont the copper is fine too. from your sig i can conclude you have only copper, so just pick the one that looks best.
10-23-2009, 12:12 PM
WaterFlex

Quote:

Originally Posted by ChielScape

the nickel plating on the copper is so thin it wont hurt performance. what the cover is made of doesnt matter, so all 4 versions will perform the same. IF you have aluminum in your loop, i'd strongly recommend either nickel one, but if you dont the copper is fine too. from your sig i can conclude you have only copper, so just pick the one that looks best.

Thank you for the help!
10-23-2009, 01:55 PM
Sgt.McRuff

eta on swiftech full cover block for 5850?
10-24-2009, 08:08 PM
Pied

Quote:

Originally Posted by Sgt.McRuff

eta on swiftech full cover block for 5850?

+1 :up:
10-24-2009, 08:15 PM
Boogerlad

Quote:

Originally Posted by ChielScape

the nickel plating on the copper is so thin it wont hurt performance. what the cover is made of doesnt matter, so all 4 versions will perform the same. IF you have aluminum in your loop, i'd strongly recommend either nickel one, but if you dont the copper is fine too. from your sig i can conclude you have only copper, so just pick the one that looks best.

umm, according to this: http://www.engineersedge.com/galvanic_capatability.htm, nickel would corrode with aluminum even worse than copper. Mixed metals do not work unless they're close enough.
10-24-2009, 09:13 PM
gabe

Quote:

Originally Posted by Sgt.McRuff

eta on swiftech full cover block for 5850?

The Komodo 5800 is HD5850/5870 compatible. We are in production. ETA is 3 weeks for release.
10-27-2009, 12:16 AM
drayzen.ocau

Gabe,
I've got an MCW60-4870 sitting here I never got around to using.
Will it fit on my nice new Sapphire 5850?
I'm thinking that the spacing to the VRM's might be a little different, but you have the data to correct me on that.
If so, any chance of an upgraded heat pipe as an accessory?
cheers, drayzen
10-27-2009, 05:04 AM
dazboots

2 EK 5870 blocks

Just watercooled both my 5870 cards using the Ek waterblock.
prob is my gpu temps under load hit 55c and my vddc temps go up and over 80c. im using thermochill pa 120.3 rad and a stong pump. but im using standoffs. will it be better not using standoffs. can some 1 guide me installintg blocks without standoffs. thx in responce.
10-27-2009, 07:08 AM
SimpleTECH

Quote:

Originally Posted by dazboots

Just watercooled both my 5870 cards using the Ek waterblock.
prob is my gpu temps under load hit 55c and my vddc temps go up and over 80c. im using thermochill pa 120.3 rad and a stong pump. but im using standoffs. will it be better not using standoffs. can some 1 guide me installintg blocks without standoffs. thx in responce.

Hmmm. Those temps definitely aren't right. I get roughly 35C at load on the core and between 45-55C for my VDDC.

I'm thinking maybe you applied too much thermal paste for your core and used too little thermal tape.
10-27-2009, 07:17 AM
Eddy_EK

All temps are high.
What is the difference between idle and load?
What is your water temp?
10-27-2009, 07:24 AM
WaterFlex

Eddy_EK
I`ve just ordered your block
Have never used GPU blocks in my loop earlier. I will use only 2 fittings (no CF). Is there something like plugs in packaging arrangement to close other 2 threads?
10-27-2009, 07:38 AM
Tackleberry

Quote:

Originally Posted by WaterFlex

Eddy_EK
I`ve just ordered your block
Have never used GPU blocks in my loop earlier. I will use only 2 fittings (no CF). Is there something like plugs in packaging arrangement to close other 2 threads?

EK spec. sheet for that block claims that package includes, I quote:
"- 1 × Water block
- 2 × EK-Plug G 1/4
- 2 × EK-G 1/4 Spacer with o-ring
- Mounting mechanism with 10 × POM Acetal
standoffs
- Thermal pads"

so you should be fine with those 2
10-27-2009, 07:50 AM
WaterFlex

Tackleberry
Thank you :up:
10-27-2009, 09:44 AM
Bojamijams

Very happy with my koolance AR587 (which is also compatible now with 5850 which is what I have) .. everything under 50C (gpu, mem, VDDC) .. and looks great to boot :D
10-27-2009, 11:44 AM
scamps

Quote:

Originally Posted by scamps

...This one is on the way to me:
http://www.a-c-shop.de/Aquacomputer-...ckelt-A-C-Shop
...

and now it has arrived :D

http://www.abload.de/img/053_bildgrendernhvuq.jpg

http://www.abload.de/thumb/h2obwoe.jpg

Don´t ever do what I did: Far too many monitoring tools :rolleyes: The gpu temporary switches over to 1,65 V ... Everest OR GPU-Z will do it.
10-27-2009, 12:43 PM
WaterFlex

scamps
congrats man. This block is ultimate :up:
10-27-2009, 02:55 PM
millertime359

That is a sharp looking block there scamps.
10-27-2009, 02:58 PM
zalbard

Looks excellent, nice temps also! Congrats! :up:
10-27-2009, 09:05 PM
Crafter

Quote:

Originally Posted by [Koolance] Dean

Yes, luckily it seems ot be on an individual basis. Check your PM for my update :)

What was the problem with the Koolance blocks and how was it resolved? I'm interesting in buying one, but I want to know what I'm getting myself into in terms of potential problems. Please explain!
10-28-2009, 04:12 AM
scamps

Thank you! What is more it was unbelievable easy to mount this sweet little silver baby ... it fits absolutely perfect :up:
Some Details (in german language only): http://www.hardwareluxx.de/community...d.php?t=655756
10-29-2009, 01:49 PM
usoldier

Quote:

Originally Posted by fornowagain

No, but everybody makes mistakes. I had that block same as CyberDruid/Syrillian and it was a screw that was too long shorting out the card. I never had the issue, because I always fit fibre washers and short stainless button head screws anyway. Personally I like being able to vary the pressure without the stand offs, I applaud EKs optional 'safe, noob proof mounting system'. Not my words btw.

http://img237.imageshack.us/img237/1189/dscf2900rh9.jpg

Is this the Actual 5870 from EK in the picture ?
10-29-2009, 01:55 PM
DeanB

Quote:

Originally Posted by Crafter

What was the problem with the Koolance blocks and how was it resolved? I'm interesting in buying one, but I want to know what I'm getting myself into in terms of potential problems. Please explain!

Some standoffs were too long. We went through stock and replaced the bad standoffs and have included a slightly thicker thermal pad as secondary insurance.

Show 100 post(s) from this thread on one page