I bumped it up one notch, to 1.36V but I haven't tested it for stability, just a quick everest bench.Quote:
Originally Posted by SNiiPE_DoGG
Might give it a try.Quote:
Originally Posted by mkk
Testing Prime Large at 1000Mhz, 4-4-4-15, 1.94 (bios)
Printable View
I bumped it up one notch, to 1.36V but I haven't tested it for stability, just a quick everest bench.Quote:
Originally Posted by SNiiPE_DoGG
Might give it a try.Quote:
Originally Posted by mkk
Testing Prime Large at 1000Mhz, 4-4-4-15, 1.94 (bios)
anyone mesure temps @ 1.9v+
Guys! And what about trying oc togethter with 8gb of this ram (8500 or 9200 or 9600)?
Does anybody has two kits?
I wonder if they oc at alll?
i would not be worried on x48;)Quote:
Originally Posted by Hu13caP
on my dfi x38 i could get higher fsb with powerchips than on d9 i think higher trfc is the thing that does it on d9 i run trfc 34 max
I have a set of the 9200's and 8500's on a EVGA 780 FTW. I can run all 8 gigs at 925 mhz at 4-4-4-12 1t at about 1.85V. They max out at about 1080 mhz at 5-4-4-12 with 1.85 V. I took out the 8500's and I'm running the 9200's at 5-5-5-15 2t 1.95 V at 1200 mhz w/no problems. I cannot get higher than 1200 without it crashing or freezing. The 8500's only get up to about 1180 mhz at 5-5-5-15 2t with 1.85 to 1.9 V. The 8500's show up as 1067 soon as I pop them in..............that's a first on this mobo.Quote:
Originally Posted by Hu13caP
Nice work Ronbo56!
Can you try 8 gigs witi 5-5-5-15 ? How far will they go?
Same, I wonder how hot or warm these blade kits get. Thanks!Quote:
Originally Posted by zsamz_
thats amazing...!Quote:
Originally Posted by Jupiler
WOW.....1000Mhz, 4-4-4-15, 1.94 :up:
n-7 looks bad for canadians
ocz sent canadian orders to god knows where they gave some kinda engineering bs excuse
ty ocz for screwin up canadian orders saved me 100$
I don't think I can expect more from them with 4-4-4-15.
I tried 1040Mhz up to 1.98V (bios) but it wasn't stable at all.
Regarding temps :
I placed a small temp probe between the HS and the chip (as far as possible) and I measured around 32°C idle and 37°C load, with 1.80V.
This is with one stick, placed in DIMM 3 (second row, first slot).
The one closed to the socket (DIMM 1) (first row, first slot) and near the NB gets very hot, measuring temps of 51°C.
This was due to the heat coming off the NB (extremely hot), which of course dissipates his heat to the HS and memory in general.
Having a small fan blowing at the NB helps.
I've just purchased a set of the 9200s....stoked :D
Most likely every country out there will get this stuff before we do. :mad:Quote:
Originally Posted by zsamz_
Nope, I donīt think so because here in Sweden thereīs no sign of them yet, have to reach out to UK, Germany or some other countries in Europe but it seem like they are out of stock in most places.
Have 2 set of PC-9600 on a order at memoryc.com but they donīt know when they are back in stock, no word from OCZ.
I hope that we donīt gonna see that same failure rate on these DDR2 elpida as we start to see with the DDR3 elpida hyper. :D
Thanks Jupiler:up: Does it get hot above 1.9v?Quote:
Originally Posted by Jupiler
ddr2 epilda rates were high too lol this is rev D the others were rev B and CQuote:
Originally Posted by Ghostleader
the time n effort i put for these sticks i shoulda just ordered from memoryc lolQuote:
Originally Posted by -n7-
not 1 stick in canada besides @ TG
i really dont care for pc2-8500 lol anything below 1225mhz is worthless to me at this point
i almost got me some ddr3 lol its so cheap
Have searched e-bay, there is a guy that has at least 3 sets of every lv memory kit. And he is in canada
Yup, i ordered from that guy.Quote:
Originally Posted by Hu13caP
Three days later i was informed, oh sorry, we don't actually have these in stock...would you like a crappy alternative OCZ kit instead? :mad:
When i ordered, there had been five "in stock" for over a day.
So i got my money back & got away from that seller fast.
Hi
I'm interested in the 9600 Blades too. If anyone finds any available please post.
I do have this great kit but it is only 2GB...
that goof was doin a presale lolQuote:
Originally Posted by -n7-
You guys are looking for OCZ2B1066LV4GK in Canada?
Yes & no.Quote:
Originally Posted by MACMAC
zsamz_ & i are specifically looking for the 1150/1200 kits since these kits were announced.
I personally am fine with the low voltage Platinums (or Blades); don't really care about a heatspreader.
Only place that might actually have stock is TigerDirect, & they have the 1066 Blades @ a horribly overpriced $105+
i wouldnt touch them plats with steel heatspreaders especially with these chips they gonna get hotQuote:
Originally Posted by -n7-
5$ xtra now might save me 10$ if i rma lol
if my freind ever gets some lv 8500 blades in i'll get to test em :D but i doubt they got past them binners:rofl:
damn.... my blade 9200's just arrived and one stick is faulty.... guttered....
Fans are your friend. ;)Quote:
Originally Posted by zsamz_