X48 Rampage Formula Preview.

Quote:

---

Originally Posted by giorgos th.

just a bit away from 600fsb...the RF performs very well but i think i have a cpu fsb wall here...

http://www.imageshack.gr/files/fgb9j6agw5f4d82nyf6s.jpg

---

What bios are u using ??

still on 0219

Quote:

---

Originally Posted by giorgos th.

oh yes....it`s about 45-50C...that`s why i have PL10...guys with watercooled NB are working with PL9 (cas5) - PL8 (cas4) there...

---

Sorry for my newbishness, but with PL9/10 you mean multiplier right or somehting else? And what does it have to do with the cas of the memory?

Thnx

Quote:

---

Originally Posted by Xelation

That's the fan I put on the backplate cpu cooler, it comes with the Thermalright IFX-14 :p:

http://img238.imageshack.us/img238/8605/ifx142uq4.jpg

---

It comes with a noctua fan? :shocked:

Quote:

---

Originally Posted by RealTelstar

Thanks! :up:
its a very similar controller so mine should work too.

I really got enough of my dfi running too hot and being too picky. Will try this board as soon as the TRUE arrives :)

---

Dfi p35 UT T2R? I'm switching to this motherboard to, so just curious :up:

Quote:

---

Originally Posted by Xelation

Sorry for my newbishness, but with PL9/10 you mean multiplier right or somehting else? And what does it have to do with the cas of the memory?

Thnx

---

PL=performance level, not a multi

Quote:

---

Originally Posted by Remcokatz

It comes with a noctua fan? :shocked:

---

Lol no, he asked what the backplate cpu cooler was :ROTF:

Quote:

---

Originally Posted by Xelation

Lol no, it asked what the backplate cpu cooler was :ROTF:

---

Alright :p: thank you for the heads up dutch buddy ;)

Originally posted in the Q9450 thread:

Quote:

---

Originally Posted by Buck47

Having stability probs wQ9450 @ 3.6 -

Core 1 fails Prime within 5 seconds. All other cores seem normal. Load temps (RealTemp) 59-61C.

System:

Rampage Formula
Q9450 @ 450FSB
OCZ (2x2GB) PC2-8500
Zalman 9700
750w PSU

Settings:

CPU Ratio Setting: AUTO
FSB Strap to NB: 333
FSB Freq: 450
PCIE Freq: 100
DRAM Freq: AUTO (CPUz detects 540.1, 5:6, 2T)
DRAM Command Rate: AUTO
DRAM Timing: Manual (5-5-5-18)

All other RAM Functions: AUTO

DRAM Static Read Control: Disabled

CPU Voltage: 1.350 (1.336 CPUz)
CPU PLL Voltage: 1.50
NB Voltage: 1.65
DRAM Voltage: 2.16
FSB Termination Voltage: 1.50
SB Voltage: 1.050
SB 1.5 Voltage: 1.5
Loadline Calibration: Enabled
CPU GTL Voltage Reference: AUTO
NB GTL Voltage Reference: AUTO
DRAM Controller Voltage Reference: AUTO
DRAM Channels A&B Voltage Reference: AUTO

Am I missing something or is this chip jacked?

---

Recommendations?

Quote:

---

Originally Posted by Buck47

Originally posted in the Q9450 thread:



Recommendations?

---

First of all, lower that FSB VTT. It's too high.

You want to play with the CPU and NB GTL setting.

and also the 1.65Vmch is not needed for 450fsb and 333 strap....too high..

Yep - FSB vtt is way too high. Intel states absolute max is 1.45v (so does anandtech).

you can go up to 1.55 with sub-zero cooling..

I think it's the chip. I've tried just about everything....

Why is my core at 1603 and not 2.53GHZ :confused:

C1E -- disable it.

Quote:

---

Originally Posted by 003

C1E -- disable it.

---

Its already disable...... anything else it maybe ?

Hmm try disabling TM.

Quote:

---

Originally Posted by 003

Hmm try disabling TM.

---

I disable it......... but looking at it. It jumps from 1603 to 2539.6 then back again :shrug:

That is an indication that C1E or EIST or something like that is enabled. Pull your CMOS battery and clear the Cmos, then try disabling them again.

Quote:

---

Originally Posted by 003

That is an indication that C1E or EIST or something like that is enabled. Pull your CMOS battery and clear the Cmos, then try disabling them again.

---

Still doing the same thing.......:confused::shrug::confused:

Quote:

---

Originally Posted by RobPuba

Still doing the same thing.......:confused::shrug::confused:

---

Under Advanced -> CPU Configuration, disable all.

Quote:

---

Originally Posted by Xelation

Under Advanced -> CPU Configuration, disable all.

---

It worked...... all is stable, not moving back and forth :up:

Last question..... in my bio it states:

Ratio Status: Unlocked ( Max 9.5, Min 6.0 ) <-- Does it means I have a unlocked CPU ??
Ratio Actual Value: 9.5

Quote:

---

Originally Posted by RobPuba

It worked...... all is stable, not moving back and forth :up:

Last question..... in my bio it states:

Ratio Status: Unlocked ( Max 9.5, Min 6.0 ) <-- Does it means I have a unlocked CPU ??
Ratio Actual Value: 9.5

---

Unlocked down but not up.

I have recently purchased this mobo i am trying to decide wich type of ram to get for it.
Should i just get pc6400 800MHz or pc8500 1066Mhz?

Quote:

---

Originally Posted by gundam789

I have recently purchased this mobo i am trying to decide wich type of ram to get for it.
Should i just get pc6400 800MHz or pc8500 1066Mhz?

---

I recommend looking for some GSkill DDR2-800 HZ. That is what I am using and it OCs like mad so it will do both DDR2-800 with at least 4-4-4-12 timings and it will do DDR2-1100+ with 5-5-5-15 timings on this board. NewEgg still sells it but I am not sure if it is still D9GMH which is the IC of choice. But you can find it on fleabay and on different sites for sale and you can ask if the ICs are D9GMH. There is a GSkill link here on the forum where you can ask if the latest modules are still D9GMH.

Technically any D9GMH module will work very well covering a broad range of OC settings (DDR2-667 to DDR2-1200+). I just have a warm fuzzy for the GSkills.