Quote:
Originally Posted by Dumo
amazing chipssss dumoooo
Printable View
Quote:
Originally Posted by Dumo
amazing chipssss dumoooo
@ Andre..your 56X is good too:)
A few more SB to test this weekend and I will play with 990FX UD7...waiting for FX-8150
yeah i know but i cant leave this world without testing a x57 :)Quote:
Originally Posted by Dumo
can not Regt find out of blck on this motherboard, I had it very easy with asrock xtreme6 =107 blck np
has 2 2600K one can x54 and nr 2 will x57 ,would be great to get a handle on blck on the motherboard here
PCI-E voltset where in bios ? my SSD OCZ AGILITY Disk :banana::banana::banana::banana: up when I want to play with blck,or overclock my GFX too high
i had the chance to test an Asus P8P67 LE and it comes ONLY with vcore OFFSET jeeeze, as it was a build for a friend i have to study all, at first i couldnt get the jumps on volts but later it went good, i could also bench it to x54, and i left it stable at x48
so well i learnt another method
Sergio,
you have 2 Intel SSD,right?
Firmware 1.92 is out.
http://downloadcenter.intel.com/Deta...+und+Caching&P
thanks stasio !!! u are always one step ahead ;)Quote:
Originally Posted by stasio
could u find another faster link to AI SUITE II my baby pressed Cancel on the keyb at 87% lmao
no volts of PCIe mate...my OS is on SSD INTEL RAID0 if i pass x55 i have to give a bit more vcore no to break them, try a bit more PCHQuote:
Originally Posted by Martin.v.r
cheers !
Sergio
I can only upload somewhere if you want.
Btw,
today is updated v.1.01.40.
Edit:
OK,uploading now....
Here is:
http://www.mediafire.com/?j9vz3lg5yges8fo
http://www.mediafire.com/?gfct97v98inn3cc
Use 7-zip or hjsplit to join the files.
I was able to get it downloaded so I could upload it for download if need be. Let me know. It took like 3-4 hours, haha.
Take me 30 min.Quote:
Originally Posted by deachus
thanks a bunch mate !Quote:
Originally Posted by stasio
***EDIT dlded and installed working as a charm !!!
Quote:
Originally Posted by andressergio
use free download manager program to download the Asus AI SUITEQuote:
Originally Posted by qgshadow
it will take about 18 minutes
weird i updated and says that my SSD are already updated :shrug:Quote:
Originally Posted by stasio
Sorry guys if anyone was waiting. The cpu I picked up was only a 53X CPU. I will now sell that one and buy another one. I will probably give up soon and wait for SB-E
I haven't bumped any voltages for my agility 3 Raid 0 as well, but I'm only on 5Ghz.Quote:
Originally Posted by Martin.v.r
Btw yesterday I manually set the pll voltage to 1.75v and my 5ghz is stable at 1.42v in bios with 75% LLC (havent crashed after 4-5hrs of dragon age 2, which it does if its unstable.) :D fingers crossed though.
but i dld this link and aint v.1.01.40. or u uploaded again ?Quote:
Originally Posted by stasio
cheers !
Sergio
cool max2 some chips need PLL mine is also stable that volts set on BIOS. keep it upQuote:
Originally Posted by i_max2k2
what i meant was warning you on using your raid for benching hard...
cheers !
Sergio
Please do.Quote:
Originally Posted by deachus
Uploaded is v.1.02.03.Quote:
Originally Posted by andressergio
yes thanks for this one, but i dont understand there's a new one ?Quote:
Originally Posted by stasio
Yes,v.1.01.40 dated 02.Sep 2011.Quote:
Originally Posted by andressergio
Uploading now.....here:
http://www.mediafire.com/?h8e5e1a61va50uk
so new version is older than the otherQuote:
Originally Posted by stasio
old 1.02.03
new 1.01.40
jesus being a programmer for years i dont understand this new ones lol
thanks stasio
v1.02.03 -01.Sep 11 (size 347671 KB)Quote:
Originally Posted by andressergio
v1.01.40 -02.Sep 11 (size 220987 KB)
maybe a new development ? less GB and restarted numeration ?Quote:
Originally Posted by stasio
here u can see the dif of each version i installed over the last and went good
http://img571.imageshack.us/img571/2954/aisuiteii.png
Uploaded with ImageShack.us
andre i installed msi afterburner 2.0 , but you can't overvolttt :\\\\\\\ :(
no not 2.0 i told you this oneQuote:
Originally Posted by qgshadow
http://downloads.guru3d.com/-MSI-Aft...load-2777.html
2.2 beta 6 and enter to settings and unlock voltaje control
cheers
Sergio
just traded my MIVE...
kinda want it back, :(
Why did you do that ?Quote:
Originally Posted by badatgames18
oh no why on earth did you do that manQuote:
Originally Posted by badatgames18
not the brightest idea why so?Quote:
Originally Posted by badatgames18
nvm i meant beta 6, still lock up PC :\Quote:
Originally Posted by andressergio
Quote:
Originally Posted by Counter CS
Quote:
Originally Posted by andressergio
I needed a good 980x for my 1366 setup... but it's ok guys.. just bought one from Hardass :)Quote:
Originally Posted by l0ud_sil3nc3
currently on a ud4.. :/
just dropped my Costa Rica batch on the MIVE, this are vcore hunger now i can say my MALAY is kind golden boots at x56 on 1,586, this dont even enter win at 1,65
at x56 enter wins but freezes with black screen, so i went to push bclk at x55 and went good (using turboevo)
here's a screen
http://img844.imageshack.us/img844/6127/sinttulokd.jpg
Uploaded with ImageShack.us
this is my baby golden
http://img42.imageshack.us/img42/5697/captura1qa.jpg
http://img97.imageshack.us/img97/6852/capturalv.jpg
Uploaded with ImageShack.us
One quick question guyz. Do you think that the MIV Gene-Z can be comprared with MIVE-Z? It will run a 2600k and a single gpu. Is the Gene going to achieve the same overclovking with the Extreme?
Gene Z its very good i think this mobos are awesomeQuote:
Originally Posted by ChaosAD
Thanx for the reply, the reason i ask is because of the price difference. Gene-Z is 170e, Extreme-Z is 350e.
glad to help mate but u can see some ppl very happy with it, MIVE is awesome but depends on what ur willing to payQuote:
Originally Posted by ChaosAD
ur planning to OC and bench ?
nice chip sergio...Quote:
Originally Posted by andressergio
here's my Costa 3103B306 on MIVE-Z
bootable at 56X on water, but on 2C/2T only
http://i458.photobucket.com/albums/qq306/owikh84/56.jpg
4C/4T resulted in evil blinking cursor
here's the rig
http://i458.photobucket.com/albums/q...D/DSC_0067.jpg
hi
i have a question : max temp for SB and NB please on maximus IV Ex ?
Thanks
Something isnīt right on that Aida64 score.Quote:
Originally Posted by andressergio
Look at my score, CPU only at 5Ghz, mem@2133 9-11-10-28 1T
http://img841.imageshack.us/img841/160/cachememi.png
yes its perfectQuote:
Originally Posted by Counter CS
this is mine same speed as yours 5GHz HT but 16GB 2133 9-11-9-27- 1T
http://img855.imageshack.us/img855/9...ot21339119.png
http://img153.imageshack.us/img153/9...ot21339119.png
Uploaded with ImageShack.us
I m planning to oc and fold.Quote:
Originally Posted by andressergio
Quote:
Originally Posted by owikh84
and that's a nice setup "owikh"! :up:
nice rig owi !!! my costa rica one its vcore hunger my malay no thanks god, your setup looks power and that nice 4 fan rad yayQuote:
Originally Posted by owikh84
i guess with gene z u will be ok but maybe some guys who have it may write some notes to help:up:Quote:
Originally Posted by ChaosAD
New setup :)
http://www.abload.de/img/case-mod_bw_120oo1e.jpg
thats sexy :)Quote:
Originally Posted by GaBBa-Gandalf
Maximus-Extreme turbo parameter ? set
+1 would like to know about turbo paramters....i got this at auto?Quote:
Originally Posted by Martin.v.r
This thread suitable for the Z68 model also?
Quote:
Originally Posted by humeyboy
I would imagine as they are similar boards and a separate thread for the Z68 does not exist.
Cool :)
Just make sure you don't flash a non-Z BIOS on a -Z board, and you are good.Quote:
Originally Posted by humeyboy
Well got mine yesterday. But mine is the z version but it looks to be the same. And all i have is elpida ram, which it runs but acts real weird though. Guess i will have to get some different ram now. What is the normal voltage for around 4.8ghz -5.0ghz? As i'm not sure if the ram is causing most of it and/or i got a bad cpu. That needs a ton of voltages to get it to not blue screen or not boot at all after the windows logo. Thoughts or suggestions to try as i am all ears, running out of ideas now.
shutting down right after the windows logo, or shutting down right before the windows logo (then restarting) is a sign of ram being troublesome.(for me at least)Quote:
Originally Posted by KILLER_K
All i have are hypers also... if i tighten timings or increase frequency while not adjusting voltage in relation... system acts weird just like yours.
Here are my sticks
Attachment 119789
are you on water or air? if you are.. average chips need 1.44-1.488v to be stable @ 4.8-5.0ghz
subzero will require less 1.37-1.41v
Another sign that it's the ram is if system freezes with no bsod.
I suggest isolating the problem by running ram@ 1600MHz, or what ever is bellow rated specs... then focus on cpu to figure out what it's stable @
It is stopping after the windows logo, basically just sits there. Black screen and does nothing. Well glad to know it is just not me. I will lock the ram and just try the cpu then. Once i find the max on it i will then figure out the ram or trade it and get some that like sandy bridge then. Thanks
mmm i would say its the chip mate some strong IMC than othersQuote:
Originally Posted by badatgames18
i have 2 x56's
one i can boot easy at 1,585 x56 2/2 the other i cant even at 1.65 on bios and does that windows logo full waiting to desktop and black screen...so i went to x55 and just pumped 101.8 bclk and 5600+ i tried at 1600 CL9 so i dont think its memory
u can see them here
http://hwbot.org/forum/showthread.php?t=16541&page=49
cheers !
Sergio
i guess it could be the chip :shrug:
when i was playing with my ram... i tried booting 6-5-5 @ 1600MHz... i got to the windows logo, after animation was over, motherboard restarted.. then i waited and pressed enter when it asked me to continue windows normally, got to windows animation again.. afterwards shutdown again then restart. I changed tRCD to 6 and it booted up and went into windows just fine.
My situation seems a little different then yours and Killer_K so i guess it can be his chip
thanks for catching that :)
2600k batch #: 3104C269
max multi x56, max mhz wall tbd. . .
water
Attachment 119794
Quote:
Originally Posted by KILLER_K
P67v Z68, not quite same but memory controller is in CPU after all!
I normally am a Corsair fan (older Dominator etc.) but G.Skill seems to be highly rated for this Mobo and I have 16GB of it!
Check the manual for memory on the QVL list!
pretty good chip there l0ud_sil3nc3 :clap:
can it do 4c/4t 3d bench?
very nice l0ud i have to try XP as it need lessss volts than W7x64 very nice manQuote:
Originally Posted by l0ud_sil3nc3
cheers
Sergio
didn't do much testing for that just playing with some 01, check out the 3d01 Asus thread in extreme 3d, regardless I will test the others later tonight when I get a chanceQuote:
Originally Posted by badatgames18
thanks buddy:up:Quote:
Originally Posted by andressergio
I think i am going back to my x58 platform. I'm honestly not that impressed with this 1155 socket. Still buggy in my honest opinion. Anyone that wants a chip and board let me know. Thanks
hmmm I have felt that sandy bridge is just as stable as X58, except it runs cooler, uses less power and overclocks higher, what specific issues are you having with your setup?Quote:
Originally Posted by KILLER_K
+1 for thatQuote:
Originally Posted by l0ud_sil3nc3
++1 :yepp:Quote:
Originally Posted by andressergio
I would agree if you get a good cpu and it overclocks very well. And have ram that doesn't cause issues with your board. But i will order some different ram and pick up a few more chips to see what the deal is. ThanksQuote:
Originally Posted by l0ud_sil3nc3
LOL @ all the "+1, ++1" comments. You could have put in a real comment if you was actually so happy with it. Just putting in that comment really doesn't help much in a forum.
Edit: Seems to be the chip. It just doesn't scale good past 4.8ghz without shooting a lot of volts to it. So i just need to try some more chips out it seems now. Thanks
Elpida hypers?? it is not conforming with Intel JDEC on SB IMC subtimings.Quote:
Originally Posted by KILLER_K
so go get a better ram which is claimed to be SB- compatible
killer_k we just defend our thread as its for that NOT for X58, u said you dont see dif but we all see them clear, as owi stands elpida its not the taste of SB so try some other RAM, and also u have read here that some IMC on chips are badQuote:
Originally Posted by KILLER_K
its obvious we will put +1 as we all like this board and SB and we all move to for the reason its cooler, faster and fun
cheers
Sergio
+++1Quote:
Originally Posted by andressergio
Well I know what you are saying about getting a good chip, but if you are running hypers on sb they need to be good (i.e. gtx2 or dom gt 7-8-7) in order to run 2133+, if you are going to keep them run them at 1600 6-6-6 or 1866 8-8-8 if possible.Quote:
Originally Posted by KILLER_K
It sucks that most of the sb memory that is good for benching is oos everywhere, but see if you can find any of the 2133 8-9-8 or 7-10-7 kits (or 2200 version) then jump on them and you will be one happy camper.
As for finding a good cpu, man that has been a lot of work since january but it is pure luck and eventually you will find a good one. What exactly are you looking for in a chip? stable 24/7 clocks or a bencher?
Thank you for understanding. It is nice to see someone knows what i am talking about. Like i said it was more my chip then anything and i know the elpida ics wasn't helping. So i will either trade that ram and do a combo on my x58 r3e perhaps. Since they do so well on it. And move forward from there. ThanksQuote:
Originally Posted by l0ud_sil3nc3
any compatibily issues between MIVE and Thermalright Archon air cooler? anyone using them?
we all understand mate its just you need to read some pages back, its like common thing that some ppl dont read and just post on last page without looking back, this is xtremesystems its FULL of articles, posts, screens, discoverings, guides, and all comes from our experiences from our money to buy and test things and put them here so others can also learn and we also get feedback to keep on learning...its just the way u entered the thread that was bit rude, i just dont see ANY point to go to X58 cauz u just got a bad chip mem or whatever, you can also read that we all tested various chips to get what we want and this mobo its just the best thing i ever hadQuote:
Originally Posted by KILLER_K
regards
Sergio
I read through all the pages here as i always do. And you can see where some are using elpida ics and they work fine for them. Plus i'm in here reading everyday through articles and post. So don't think i am just some new guy posting trying to get attention or flaming post.
I have both systems so going to either isn't a big deal. But if you think the 1155 isn't buggy and is 100% solid, then that is the way you feel. I still see issues with the boards and uefi settings, etc. I may not post about reviews, benchmarking and hardware. But i know what is going on with my stuff and the ram i use. I was hoping i could make the ram work until i found some ram that i would like to purchase.
The ram works fine up until 2133mhz but it does blue screen here and there. I'm sure if i took the time to adjust each setting i could cure it. But i'm running 1,866mhz and not having to worry about blue screens and crashing now. But just because i have a different opinion or don't see something the way you do. Doesn't mean i am being rude. The forum works off of people opinions, thoughts and input on stuff.
Where i come from opinions, thoughts and suggestions are always welcome. And if someone states what is on their mind then that makes them a real man. As i don't like for people to stand in the back just saying stuff and not trying to stand up for what they say. Either way, I thought i would clear that up, so everyone would know where i stand. If i say something that makes you mad or you don't like, then that is just me i'm going to say whatever i feel like i need to say about you , a item or anything else for that matter.
It is just me, so that is all i can really say. But life goes on and please continue the thread. I will post anything else i find on my issue here. Thanks
i saw many ppl use hypers, i have a kit but unfortunately i sold it, i found that after trying lots of kits winners whereQuote:
Originally Posted by KILLER_K
mushkin 1600 6-8-8-24 1T 2x2GB they go easy to 2250 for bench and daily 2133 C7
mushkin 2133 9-10-11-28 2x4GB they go up to 2200+ not touching a volt
patriot xtreme 2000 9-11-9-27 2x4GB they go up to 2175 not touching a volt, actually i have 16GB of this at 2133 9-11-9-27 1T 1.65V at 5GHz HT
as i told before not a chip equal to another not even a mobo mine does 108 bclk at 108 x 52, my friend's cant go above 106 etc
maybe its good u try this cheap kit i told u and you will love them its like 82 dols for an amazing and flexible kit of 8GB u can bench or whatever with it
http://www.ramexperts.com/ddr3/perfo...op-memory.html
there u have them
and here its my screens using them at x56
http://www.xtremesystems.org/forums/...-Thread/page54
Cheers and good luck
Sergio
Thanks i'm installing xp for some benchmarks and i will report back. And if i upset you or anyone else for that matter then i apologize. But i'm going to keep the board though. Still working on the chip as i found something odd with it. I will check out the links. Thanks
I too have problems running Elpida Hyper with Spi32M, other than that its all fine.
Strange that this tiny bench can kill stability of those nice ICs.
Hope Asus will make the diference on P67 mine field, and bring some nice BIOS suport for all Elpida hyper ICs.
yeah waiting your results ;) keep it on ! and report back test max multi using 2 cores so you dont give lots of volts to the chipQuote:
Originally Posted by KILLER_K
g luck
Sergio
well u have better ram over there cheap and they are PCS and BBGE, check ma posts even on 16GB this tings flyQuote:
Originally Posted by Counter CS
cheers
Sergio
Guys i installed another Intel SSD 80GB X25M G2 now i got 3 on RAID0, i just HDDERASE and load the image of W7x64 SP1 and GAMES look at this speeds god !!!
http://img38.imageshack.us/img38/1846/3ssd.png
Uploaded with ImageShack.us
Nice Sergio....
sick my friend:toast:Quote:
Originally Posted by andressergio
thanks bud !!!Quote:
Originally Posted by CHiLLiN1369
lol thanks friend im very happy with thisQuote:
Originally Posted by l0ud_sil3nc3
cheers to all
Sergio
Amazing. Thinking i need to add another SSDQuote:
Originally Posted by andressergio
thanks mate yeah its VERY fastQuote:
Originally Posted by Pestilence
How do you get them stable? I cannot get similar Dram to run without debug fault LED's lighting up at default on my MIVE-Z. Are you using a modified "XMP" setting?Quote:
Originally Posted by andressergio
Any chance of a couple of dram timing screens or list of important settings?:up:
well maybe i was lucky but i didnt touch anythingQuote:
Originally Posted by newhit
Mushkins 2x4GB 2133 9-11-10-28 1.65V trfc 172 i use 112
Mushkins 2x2GB 1600 6-8-6-24 1T 1,65V @ 2133 7-11-7-27 1T 1.65V
and my best mem Patriot Xtreme 4x4GB 2000 9-11-9-27 1,65V @ 2133 9-11-9-27 1T trfc auto
some friends here got the same and rock solid also
cheers tell me if i can help you any further
Sergio
Received my MIVE last week. Installed and work like a charm :) Looks very nice too !
As for now, im running my 2600k 4.5ghz with 1.33v, passed 10x LinX without issue. Ill work for better volts as soon as i can and ill try to reach some good clocks for gaming.
You guyz leave alot of settings on AUTO (like PLL and others ) or you manual alot ?
http://infodupat.com/MIVE_023.JPG
I leave a lot on auto except the Vcore ofcourse. I hit 5Ghz for about 2 hours then said i don't need it and clocked it back to 4.4Ghz.
boulard FELICITACIONES for that rig looks awesome neat !Quote:
Originally Posted by Boulard83
Thnks Andre !
vcore and temp improved abit with spread spectrum enabled.
http://i458.photobucket.com/albums/q...00K/501442.jpg
Hiya,
Wondered if anyone could help please?
I'm currently at 4.8Mhz and trying to get to 5.0Ghz...
I've tried the following (anything else not mentioned is on Auto)
Vcore: 1.45v
VCCIO: 1.08
CPU PLL: 1.86
LLC: 75 %
@ 100 x 50
I can boot into windows 7, but as soon as I start Prime95 test, instant freeze and BSOD with 101 error code.
Any advice please?
Thanks
nice owi what exactly spread spectrum does ?Quote:
Originally Posted by owikh84
it seems that ur chip needs a bump more vcore. bsod 101 means -> increase vcoreQuote:
Originally Posted by MonsterDK
..and pls lower ur cpu pll. 1,86 is much to much.. 1,80 is std. on my chip i can go down to 1,62 without instability.
hth
Hi,Quote:
Originally Posted by Sauron_Vie
Any suggestions what sort of Vcore I should try for 5Ghz and how can I find out what sort of max vcore boundaries this chip has? as I don't want to go to much.
Thanks