Bet that looks sweet, lets get some radiators in that thing! :smoke:Quote:
Originally Posted by .raw
Printable View
Bet that looks sweet, lets get some radiators in that thing! :smoke:Quote:
Originally Posted by .raw
http://www.abload.de/img/img_2739cp05.jpg
http://www.abload.de/img/img_2725s94l.jpg
In a few weeks everthing is in my LL B10:
http://www.abload.de/img/img_2723ohm8.jpg
Lots of people here use those EK reservoirs.
I would like to know, they are better than, for example a Bitspower Tank z-multi??
Because I can get a EK 100ml or a Bits 150ml/250ml.
And well that EK reservoir is cheaper than Bits tank.
Wrong topic, may I suggestQuote:
Originally Posted by mcp
http://www.xtremesystems.org/forums/...d.php?t=238351
. . .and for everyone else. . .may I suggest you read this
http://www.xtremesystems.org/forums/...96&postcount=1
Thanks, Waterlogged.
Just a reminder - completed water cooled rigs only. Please no more than 4 pics - use thumbnails or a link if you'd like to show more.
For photos of parts, please post in the thread linked by Waterlogged.
Also - to keep system photos as the highlight of the thread, please minimize discussions on components, etc - feel free to use PMs.
Thanks!
Dany, bigger pictures please...
(hint: 3.264 x 2.448 pixels)
Original size in thumbnails-
http://img694.imageshack.us/img694/5003/pb170205.th.jpg
http://img91.imageshack.us/img91/3921/pb170204.th.jpg
http://img694.imageshack.us/img694/4681/pb170203.th.jpg
http://img694.imageshack.us/img694/9356/pb170202.th.jpg
http://img694.imageshack.us/img694/2636/pb170200.th.jpg
http://img256.imageshack.us/img256/345/pb170201.th.jpg
http://i33.tinypic.com/s2sacz.jpg
http://i38.tinypic.com/hry0jb.jpg
Still doubtin' on rad setups, prolly I change the MCR220 back to a RS120 to create more space
the HD4870 is back in the main rig, Half Dead 7900GT is back in
http://i37.tinypic.com/5upqht.jpg
Tough I've got a HD3850 512 coming for it temporary, still lookin' for something more decent (HD4890 or so)
Current specs
E6750@3408Mhz@1.344v
6GB PC6400 corsair
P5K Deluxe wifi ap
7900gt =>HD3850@MCW60
1.64TB WD
Neo He 550
Lian Li V1000B II Plus
Watercooling
Dual loops
2x DDC 10w w/EK X-top
Multires 150
Multires 130 or so (top of an x-res, 12cm tube bought and an ek multioption bottom
2xRX120
1xMCR220
EK Mosfet blocks
MIPS NB block
HR05-ifx passive@SB
D-tek Fuzion V2
-some other mess, like bp blinbling
Superb Lian Li Case:up:
atmo: beautifully done!
nice build atmo :up:
it's been said Atmo, but your case is seriously stunning.
Hello Guys. :)
it's my liquid cooled HTPC:
http://img9.imageshack.us/img9/1023/50638065.jpg
http://img4.imageshack.us/img4/2953/48979622.jpg
http://img269.imageshack.us/img269/706/68651143.jpg
http://img193.imageshack.us/img193/2574/82228866.jpg
http://img200.imageshack.us/img200/7171/92363020.jpg
http://img269.imageshack.us/img269/8517/23048651.jpg
...and the point is the noise level on video.
Sorry, but my Pentax photo camera has a whistle noise by low ambient noise.
This can be a bit confusing.
http://www.youtube.com/watch?v=iKygfZs0KBM
Amazing setup you got there Logaan
Komoly gép :) Nice machine m8 :)Quote:
Originally Posted by Logaan
http://www.shrani.si/t/1J/2J/4A29s0TK/p1030746.jpg http://www.shrani.si/t/1O/QK/1EYmyxeZ/p1030745.jpg
another 5870 comming :D
Computer Beautiful
What's with these first post amazing setups?
It's like a conspiracy or something. :up:
@atmo, great looking setup :D
Nice pics peoples...be as they may people just don't get the "4" pics rule :shakes:perhaps we should have some sort of template for this thread with tighter restrictions to ensure compliance:shrug:Quote:
Originally Posted by shazza
my simple watercooling setup..sorry for blurry picture.,snap with phone camera..
Thanks everyone. :)
Really very serious mashines are here... :up:
@RADCOMQuote:
Originally Posted by RADCOM
Sorry for the "4 pics rule". You're right.
beautiful! :up:Quote:
Originally Posted by atmo
not as purdy as the others here, but i tried, lol.
http://img39.imageshack.us/img39/6787/p7210122.jpg
http://img684.imageshack.us/img684/2848/pb140192.jpg
http://img692.imageshack.us/img692/6149/pb140193.jpg
http://img695.imageshack.us/img695/4388/pb140194.jpg
^I like the mix of black/white/clear tubing. Looks cool :up:
Looks nice,but would look even nicer if you had posted pics in thumbnails rather than breaking forums layout :D
didnt break the layout for me.... time to upgrade your monitor :shrug:Quote:
Originally Posted by ile
^^Just saying.
Quote:
Originally Posted by Ashraf
Not to take away anything from the great systems, but please adhere to the request for NO MORE than 4 Pics and no bigger than 1280x1024.
Please follow the guidelines so we can keep the thread nice and tidy. I'll be editing pics down to 4 going forward.
If you have more pics you want to share, use thumbnails, links, or start a work log.
Just sign me,
Mom (aka LC Gallery Nag)
your pc's one of my favourite mdpc builds. :)
Not done yet, but here is one :P
http://i45.photobucket.com/albums/f6...d/DSCN0946.jpg
Where's the confounded bridge? :confused:Quote:
Originally Posted by Razorfoot
Maybe he is using the GTX 260 as a PhysX card only.
Quote:
Originally Posted by Weevil
:up:Quote:
Originally Posted by Airbrushkid
I see 3 graphics cardsQuote:
Originally Posted by Airbrushkid
http://i22.photobucket.com/albums/b3...art666/427.jpg
not the best photographer, but you get the idea.
First WC Rig with no experience :shrug:
http://img69.imageshack.us/img69/2158/09112009221j.jpg
now making my P55 Rig :yepp:
Sorry never notice the third card hiding. But why would the center card be water cooled?
Quote:
Originally Posted by Weevil
http://nsm02.casimages.com/img/2009/...3844492289.jpg
http://nsm02.casimages.com/img/2009/...3844492279.jpg
http://nsm02.casimages.com/img/2009/...3844497586.jpg
http://nsm02.casimages.com/img/2009/...3844497587.jpg
http://nsm02.casimages.com/img/2009/...3844517847.jpg
http://nsm02.casimages.com/img/2009/...3844928592.jpg
http://nsm02.casimages.com/img/2009/...3844928623.jpg
http://nsm02.casimages.com/img/2009/...3844928594.jpg
http://nsm02.casimages.com/img/2009/...3844928596.jpg
Looks nice, but seems like you aren't using backplate for cpu WB, mbo is way too much bended.Quote:
Originally Posted by Ames974
No, it was already like that before I set the WB on the motherboard :(
Luckily everything works perfectly :cool:
f@h maybe :shrug:Quote:
Originally Posted by Airbrushkid
@ Ames974
Some serious cramming going on in that mATX case, I like it :up:
Always liked short loops, and you even fit a D5 in the mix.
http://www.abload.de/img/img_2401m0mf.jpg
http://www.abload.de/img/img_2393ib9q.jpg
The water needs more blue color :D
B-E-A-UTIFUL! Nice job, and I think the color is fine, I use the same color, I add 50cc of Feser blue to about a liter of distilled, and a silver coil for good measure.
Really beautifull Schlingel, i like this soft blue.
thx :) anyway: I will give it a try to get a bit darker blue. The mixtrue is already prepared so I only need to find some time to change the water...
It wasn't directly directed at you my friend, many have made the mistake:up:Quote:
Originally Posted by Logaan
very nice
That is an awsome build Schlingel. More pics plz?
Temporary rig :)
http://i.imagehost.org/0832/DSC09062.jpg
I can tell, looks like you just slapped it together, very sloppy. ; )
Beautiful!
Your locks for RAM aren't closed :shakes:Quote:
Originally Posted by Screamer
:)
@BlackHouse: very nice rig you have there ! :)
thx man ;D
That is cool, but where is the rom drive? :up:
From this Thermaltake Armour
http://i295.photobucket.com/albums/m...2/SDC10358.jpg
To Tj07... Not done need extension cables and longer satas but 90% finished
http://i295.photobucket.com/albums/m...2/SDC10376.jpg
http://i295.photobucket.com/albums/m...2/SDC10379.jpg
The HDD mount
http://i295.photobucket.com/albums/m...2/SDC10384.jpg
http://i295.photobucket.com/albums/m...2/SDC10385.jpg
http://i295.photobucket.com/albums/m...2/SDC10387.jpg
http://i295.photobucket.com/albums/m...2/SDC10388.jpg
WOW COOL!, wait a minute... the :banana::banana::banana::banana:. orange reservoir holdeeeeeer! :shocked:Quote:
Originally Posted by kwscore
No kidding that is my dream PC right there. And exactly what I am trying to build...sorta..Minus the WCing since I have no experience..Quote:
Originally Posted by Ames974
i am plannin on using the GENE with 750 i5 the lian li v351 the xigmatek fans and the same fan controller :)
Sorry for asking, bu't I just have to know.Quote:
Originally Posted by mcp
What's the fitting that passes through the floor called?
MUST.. HAVE.. THOSE! :D
They are from Feser.
http://www.a-c-shop.de/Schottverschr...-Fillport-G1-4
;)
sweet case!! What size rad is that?
Very nice build - could you upload more pics :)
Some fresh pics of my computer.
I switched to white tubing 1/2x3/4 and to deionized water with silver killcoils(biocide) because I was scared after reading a post which shows the effects of the feser blue to a Gtz.:)
http://i842.photobucket.com/albums/z...s/DSC02810.jpg
http://i842.photobucket.com/albums/z...s/DSC02806.jpg
This is my absolute favorite :up:Quote:
Originally Posted by Schlingel
What additive you used to get that great water tint? Bought or homemade?
My bet is pentosin, that gives exactly that color.
Here are some pics of my first ever WC rig. Cable management isn't very nice, but I think it its fairly clean for a WC'ed A05B...
http://i366.photobucket.com/albums/o...o/P1010511.jpg
http://i366.photobucket.com/albums/o...o/P1010531.jpg
http://i366.photobucket.com/albums/o...o/P1010516.jpg
http://i366.photobucket.com/albums/o...o/P1010517.jpg
I've since stripped the rig of its WC components and sold it as an air-cooled rig.
-TadZilla
BASF G48 normally used for cars mixed with demineralized water.Quote:
Originally Posted by žile
For more blue colour I prepared a new mixture with more G48. Will try it later ;) Hopefully the water gets deeper blue this way.
MY SCARLET.... build log on OCN :D
http://i29.photobucket.com/albums/c2.../scarlet-1.jpg
My first watercooling build :)
mcp355
xspc top
swiftech mcr320
apogee xt
danger den t-fitting
danger den fillport
primochill flex pro 3/8, 5/8, 1/8 (id,od,wall)
distilled + pt_nuke
http://farm3.static.flickr.com/2567/...c1a64cc559.jpg
http://farm3.static.flickr.com/2791/...f2469aaca9.jpg
http://farm3.static.flickr.com/2791/...f89fab33e5.jpg
http://farm3.static.flickr.com/2782/...585beb24_b.jpg
More can be seen here:
http://www.flickr.com/photos/deafman...7622799531115/
Looks good, it's nice to see people not afraid to take to their towers with a dremel. Can make fitting an entire WC loop internally look much, much neater.
Nice build:up:
Chad
Looks like a TJ08 with inverted internals.Quote:
Originally Posted by LogAn'sRun
Thx LogAn'sRun and Malik :)
100 points nullface. Its a Silverstone TJ08 inverted ATX Case.
Second GTX missing :(
http://www.abload.de/img/p1000997k4e9.jpg
Blah123, that is a really sweet looking build! Love the colors, very clean look.
Hey XS, OK so I've been around for a while (although hardly any posts), mainly looking at the Watercooled and Case Mods section, and thought I should upload pics of my Rig.
This was a few months ago, in a month or 2 I'm planning of upgrading to a i7 set-up, and would love to hear people opinions / suggestions on what I can improve on. Thanks guys :)
Current Specs:
Core 2 Quad Q6600, nVidia 8800GTX, Asus P5K-E, Corsair XMS 2, 500GB & 200GB WDC HDD, Epsilon 700w, Thermaltake Soprano FX, Windows 7 HP.
http://img141.imageshack.us/img141/3100/p1010043o.jpg
http://img100.imageshack.us/img100/8343/p1010028c.jpg
http://img26.imageshack.us/img26/2067/p1010031z.jpg
http://img140.imageshack.us/img140/782/p1010033t.jpg
http://img100.imageshack.us/img100/3374/oddbits.jpg
http://img100.imageshack.us/img100/4813/mg3069.jpg
Tell me if these are too big, I'll resize them. :)
http://i293.photobucket.com/albums/m...6/IMGP0531.jpg
http://i293.photobucket.com/albums/m...6/IMGP0521.jpg
http://i293.photobucket.com/albums/m...IMGP0519-1.jpg
hey noob, that is not a noob work at all! great rig :up:
nice rig noob eater4726!!! Congratulation!!!!
Noob eater, what power button is that? I like it! Nice build too. :up:
http://www.abload.de/img/img_0330ivzq.jpg
an older rig from my collection, that i´ve build in 2007 for my girlfriend :)
Where's your PSU?Quote:
Originally Posted by Alec**
Pretty good job given the fact that Soprano is crappy cramped case with next to no space when HDD and PSU are in their places.
Your graphics is pretty bended too.
The PSU is in the op-back (standard place) but on it's side so you can fit a HDD cadge in there too.Quote:
Originally Posted by ile
Yeah, it is far from the best for watercooling in terms of layout but it was quite pleasing how well we managed to fit the Rad, pump and Res.
And indeed the GPU is bent a bit on the end, like that since new. But sent it back to nVidia originally and they tested it and said it runs fine and it's been working all the time without any probs so all ok :)
Thanks for the interest, zile :)
Could you post the picture of this, please?Quote:
Originally Posted by Alec**
I changed Soprano for Chieftec LCX, which is quite larger, and still I have worse loop arangement than you do. :ROTF:Quote:
Originally Posted by Alec**
Will get to work when mobo and ram arrive :cool:
BTW, tint is great. Which additive you use?
It's been a while since i last posted my PC. So here it is again. No big changes, just the new HD5850 GPU with EK waterblock.
http://i50.tinypic.com/y0w7d.jpg