DQ6 beta BIOS

Printable View

Show 100 post(s) from this thread on one page

12-20-2006, 03:12 PM
Ajfina

is F8 out yet?
12-20-2006, 03:17 PM
eXceeded

Quote:

Originally Posted by Ajfina

is F8 out yet?

lol omg...

Quote:

Originally Posted by bingo "post above yours..."

It has been way too long in coming but we should have a final F8 for the DS3 here on Friday or at least the new qualification candidate. Once we get it, I will post it up.

Thanks for the info bingo!
12-20-2006, 04:42 PM
badhabit

Quote:

Originally Posted by eXceededgoku

lol omg...

Thanks for the info bingo!

Haha, give him a break - they posted at the exact same time.:stick::p:
12-20-2006, 05:45 PM
Tac0

Quote:

Originally Posted by dnottis

@bios in Winders is fine. :D

Grab a $7 50MM fan from Newegg, brought my NB back to slightly above room temp.

I put one of the Evercool "twinkling" copper heatsink/fan dealies on mine and that was a huge improvement for 10 dallah. :2cents:
12-20-2006, 07:28 PM
bingo13

Here is the F8 Qualification BIOS. Pound on it and let us know what you think, please.

http://rapidshare.com/files/8348310/...Qanandtech.zip
12-20-2006, 07:29 PM
dnottis

Quote:

Originally Posted by bingo13

Here is the F8 Qualification BIOS. Pound on it and let us know what you think, please.

http://rapidshare.com/files/8348310/...Qanandtech.zip

Excellent - cold boot folks, please test this!!!

Bingo13 - any word on your testing? Did this cure the cold boots for you?
12-20-2006, 07:53 PM
hausner

Quote:

Originally Posted by bingo13

Here is the F8 Qualification BIOS. Pound on it and let us know what you think, please.

http://rapidshare.com/files/8348310/...Qanandtech.zip

Thank you man ! :toast:
12-20-2006, 08:10 PM
ziddey

holy :banana::banana::banana::banana: the day has finally come!!!!!!!!!!
12-20-2006, 08:12 PM
dnottis

Get testing guys... I have to yank my P5B-E so Im relying on your results first! :)
12-20-2006, 08:16 PM
blurp

Quote:

Originally Posted by bingo13

Here is the F8 Qualification BIOS. Pound on it and let us know what you think, please.

http://rapidshare.com/files/8348310/...Qanandtech.zip

Too bad, wake from sleep (s3) is not fixed. It simply doesn't work since F8 exist. :(
12-20-2006, 08:45 PM
bingo13

Quote:

Originally Posted by dnottis

Excellent - cold boot folks, please test this!!!

Bingo13 - any word on your testing? Did this cure the cold boots for you?

I have no idea yet. :D I posted the BIOS before I even got my board setup again. ;)
12-20-2006, 08:53 PM
Tac0

Quote:

Originally Posted by blurp

Too bad, wake from sleep (s3) is not fixed. It simply doesn't work since F8 exist. :(

ya what else?
12-20-2006, 09:01 PM
Ajfina

Quote:

Originally Posted by badhabit

Haha, give him a break - they posted at the exact same time.:stick::p:

that was actually a joke bros , :) ive been fallow this for ever , i know was cooking here
12-20-2006, 09:09 PM
DStealth

Quote:

Originally Posted by dnottis

Did this cure the cold boots for you?

It's a hardware issue, not sure bios can fix it;) The early revisions of the board have it. Mine 2nd board makes all different in terms of cold boot - reset works perfectly, but when powered down, first time can't boot, after reset become diabled FSB settings and then can boot:confused: The first one, can't reset ,but everytime after shut down can wake flawlessly;)

BTW here waiting new F8* DQ6, cos F8C can't clock over 420-430 witch suxx, cos now with F7 can boot and bench over 520 :)And using 490x8 24/7
12-20-2006, 09:20 PM
Ajfina

Quote:

Originally Posted by DStealth

It's a hardware issue, not sure bios can fix it;) The early revisions of the board have it. Mine 2nd board makes all different in terms of cold boot - reset works perfectly, but when powered down, first time can't boot, after reset become diabled FSB settings and then can boot:confused: The first one, can't reset ,but everytime after shut down can wake flawlessly;)

BTW here waiting new F8* DQ6, cos F8C can't clock over 420-430 witch suxx, cos now with F7 can boot and bench over 520 :)And using 490x8 24/7

great cpu u have there , i cant go over 370x9 at all, try 2 diferent boards and nothing , bad cpu :(
12-20-2006, 09:22 PM
Tac0

If it is hardware then a lot of RMA's or warranty work should be going down soon...:eek2:
12-20-2006, 09:23 PM
dnottis

Quote:

Originally Posted by DStealth

It's a hardware issue, not sure bios can fix it;) The early revisions of the board have it. Mine 2nd board makes all different in terms of cold boot - reset works perfectly, but when powered down, first time can't boot, after reset become diabled FSB settings and then can boot:confused: The first one, can't reset ,but everytime after shut down can wake flawlessly;)

BTW here waiting new F8* DQ6, cos F8C can't clock over 420-430 witch suxx, cos now with F7 can boot and bench over 520 :)And using 490x8 24/7

Mine is brand new - C2 revision of the chipset even!!
12-20-2006, 09:29 PM
Tac0

Quote:

Originally Posted by dnottis

Mine is brand new - C2 revision of the chipset even!!

Same board with c2 here...I haven't had any of these nightmares but my cpu seems to get too hot at a lower voltage...I start getting into 1.4v territory and my load temps get to 72c. yikes
12-20-2006, 10:08 PM
ziddey

Quote:

Originally Posted by Tac0

Same board with c2 here...I haven't had any of these nightmares but my cpu seems to get too hot at a lower voltage...I start getting into 1.4v territory and my load temps get to 72c. yikes

Whoa, what are you using for cooling? I'm on an ac freezer right now and am exhibiting the same behavior. It's prompted me to research water once again and move to it soon hopefully. I'm dead stable at 8x400=3200 1.28v actual (1.375v set in bios) and load around 58'c coretemp. However, 8x450=3600, to be able to prime for more than a second, I remember setting vcore to around 1.58 for 1.44 actual or something. Temps soared way into the upper 70's right away so I just went back to 400 for the time being.

NB is a tough son of a :banana::banana::banana::banana::banana: to keep cool
12-20-2006, 10:15 PM
msgclb

I installed this F8 Qualification BIOS but when I tried to get back into the BIOS I got a continous beep and restart. I tried pressing the Reset & Pwr buttons together and removing the pwr cable but that didn't work. I finally removed the pwr cable and shorted out the Clear CMOS pins. That worked.

I noticed that when I pressed Ctrl-F1 there's a new menu item 'Advanced Chipset Features'. Under this item there is one option that's not greyed out. It's 'GbE LAN'. Anybody know what this is for and should I leave it Enabled or Disable it?

I currently don't have my E6400 installed; just my 805D. I'm probably not going to reinstall it to see if does me any good until I see how this BIOS works with a few other DS users.
12-20-2006, 10:25 PM
dnottis

Quote:

Originally Posted by ziddey

NB is a tough son of a :banana::banana::banana::banana::banana: to keep cool

I popped a 50MM fan on mine.
12-20-2006, 10:49 PM
Phosphate

Quote:

Originally Posted by Tac0

If it is hardware then a lot of RMA's or warranty work should be going down soon...:eek2:

That would be nice because I really like this board. I haven't got around to getting a Core 2 duo yet but I have been eyeing D9GMH memory for a while now and when I get my 2 x 1 GB set I really want to push it and see what kind of frequency and timings I can get out of them.
12-20-2006, 11:48 PM
dnottis

Quote:

Originally Posted by Tac0

If it is hardware then a lot of RMA's or warranty work should be going down soon...:eek2:

Plausible deniability.
12-21-2006, 12:30 AM
Phosphate

Quote:

Originally Posted by Lestat

well i meant to say the DS3P
the rev 2 ie; DS3 w/ C2 chipset is no better than the original DS3 as it still has D9 issues.
i dont think we will see the DS3P for another 2 months considering how long it took for the Biostar board to show up here in the USA

The DS3P is the version of the DS3 that clocks well with D9s right? I really like this board, but that "bug" is really bothering me because I am just dying to push some TEAM Xtreem or Ballistix when the time comes.
12-21-2006, 12:32 AM
MadMikeSS

Have to post my own results with the new F8 bios.

My disclaimer is that I flashed it to my S3 board, not a DS3. But that shouldn't really matter.

Anyway, at first it was cold booting continuously after the initial flash. Reset the CMOS via jumper, all is well.

I set my OC, same one I run stable with the F6 bios for the S3 - 490x7 1.425v bios, ram at 5-6-6-15 timings 2.1v

System cold boots a few times and then resets the bios. Will not take that OC no way no how, always resets. Tried different cpu voltage, different ram timings. No go.

Clocked it down to 480x7, 1.45v - Does allow me to boot to windows. If I shut down and restart, resets bios and back to square one.

So it looks like it's a better bios overall then F8j, but not so good since it really killed my already stable OC.

I do like the fact that bios profiles are added so you can save your settings. 8 slots is sweet. I hope they add that in the next S3 bios revision. But I also hope that I don't lose my OC on the next S3 bios.

Back to F6 and my higher OC.

Show 100 post(s) from this thread on one page