Official Retail G0 Q6600 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

08-26-2008, 08:13 PM
Loser777

Quote:

Originally Posted by fatguy1992

I have a problem with Prime 95, now I know u all will probally just say its not stable, but it is.

I can run at 4.0GHz with 1.536v (idle) and 1.518v (load) and I can run 3D Mark 06, wPrime 1024m and super PI etc, its stable. Then as soon as I start Prime 95 in one sec it crashes. I get same problem for anything over 3.65GHz. When I was at 3.7GHz and it happened I uped my volts a lot and it still happened. If it was stable enough to run wPrime for 5min +, y can't it even run Prime 95 for 1 sec. Also I know my temps aren't the problem, because I watch them when I run wPrime etc and if it was my mobo would tell me before shutting down.

So WTF is going on?

It's either not stable or it's your PSU. My system was getting all sorts of crap until I flipped my Corsair 650 over, the intake fan was being blocked. I got the same behavior... clocks would run stable for hours on end but crash the instant I ran full load.

However, there is such a thing as a non-P95 stable overclock... sometimes you can run stuff windows and PI stable, but P95 will crash instantly.
08-26-2008, 09:45 PM
fatguy1992

THX, ok its probally my PSU, dam cheap 650watt, but i have a TT 650watt diver bay PSU for my 8800GT.

I'll do some more testing soon, as in what can it run and for how long.
08-27-2008, 01:09 AM
Pneumonic

I would image that its the PSU or the board cant keep the voltages stable enough
08-27-2008, 01:17 AM
fatguy1992

Quote:

Originally Posted by Pneumonic

I would image that its the PSU or the board cant keep the voltages stable enough

U have a Q6600 stable for 8hr Prime 95 so what PSU do u have?
08-27-2008, 02:34 AM
Alcibiades

Quote:

Originally Posted by fatguy1992

I have a problem with Prime 95, now I know u all will probally just say its not stable, but it is.

I can run at 4.0GHz with 1.536v (idle) and 1.518v (load) and I can run 3D Mark 06, wPrime 1024m and super PI etc, its stable. Then as soon as I start Prime 95 in one sec it crashes. I get same problem for anything over 3.65GHz. When I was at 3.7GHz and it happened I uped my volts a lot and it still happened. If it was stable enough to run wPrime for 5min +, y can't it even run Prime 95 for 1 sec. Also I know my temps aren't the problem, because I watch them when I run wPrime etc and if it was my mobo would tell me before shutting down.

So WTF is going on?

Saying "whatever" to failed o/c stress tests
08-27-2008, 04:47 AM
whe3ls

Quote:

Originally Posted by Ol'Baditude

Wheels, nice clock and temps. I assume you're using 95 as TJMax for Coretemp? What was the ambient temperature at the time of that screenshot? Is the CPU the only component in that loop?

My temperatures after about an hour of Prime are very similar to yours, except with the overclock @ 3.6GHz. But I am running a dual rad, not a triple. I imagine if I ran a triple, I would be mid 40's at 3.8Ghz.

its a cpu only loop with dual mcr 320's and no i have been using the 100c TJmax for coretemp should i use the 95c TJMax for core temp. its has been about 65f here lately so about 18c to 24c
08-27-2008, 05:39 AM
FabricioGS

Quote:

Originally Posted by Ol'Baditude

FSB 460ish might be getting up there for a Q6600. I know my Chip doesn't like it much, and I would probably have to do some serious tweaking to get it stable.

So I assume you are doing 425x9 for 3.8Ghz?

...

Are you sure it's not your RAM holding you back??? What are the frequency and timing values when you try your 3.8GHz overclock?

I think you've got the point. First, I'm getting a new PSU (Extream Superflower Aurora 700W) this weekend. Then I'll try to work on the board cooling and finally work with different RAM dividers.

Right now I'm trying to find the "limits" of my Q6600 in terms of clock. I know my board can post up to 480~489 fsb, and I'm confortable with 3.6GHz for daily use, but I'd like to know the max clock Prime stable on air so 425x9 for 3.8GHz is my goal right now.

I just found this screen shot with 3.7GHz:

http://farm4.static.flickr.com/3098/...c6f35381_o.png

Too shame I didn't open a CPU-z window with memory clocks, but I'm sure it's 1100MHz+ with 5-5-5-18.

Quote:

Originally Posted by fatguy1992

I can run at 4.0GHz with 1.536v (idle) and 1.518v (load) and I can run 3D Mark 06, wPrime 1024m and super PI etc, its stable. Then as soon as I start Prime 95 in one sec it crashes. I get same problem for anything over 3.65GHz. When I was at 3.7GHz and it happened I uped my volts a lot and it still happened. If it was stable enough to run wPrime for 5min +, y can't it even run Prime 95 for 1 sec. Also I know my temps aren't the problem, because I watch them when I run wPrime etc and if it was my mobo would tell me before shutting down.

That's exactly what I'm talking about here. Above ~465 fsb whenever I start Prime95 system crashes in one sec.

I can also run 4.1GHz (on air):

http://farm4.static.flickr.com/3286/...d8270f95_o.png
08-27-2008, 12:22 PM
fatguy1992

Quote:

Originally Posted by Alcibiades

Saying "whatever" to failed o/c stress tests

THX I read the thread, but my prob is a bit different, I don't get an error just a crash. Anyway I don't think any real world situation would use 100% of a 4.0GHz Q6600's processing power.
08-27-2008, 01:43 PM
whe3ls

heres 3.2
http://img267.imageshack.us/img267/1689/32vi7.jpg
08-27-2008, 01:48 PM
dnottis

I've found issues with the memory dividers causing stability issues with my overclock. I managed to get 3.8 prime stable, but when I game it will still crash on me. Dropped my memory to 1:1 and it's always fine. Running 4GB G.Skill DDR2-1100 which is memtest stable, so it's not the ram, but the divider on the board.

I've tried the latest bioses for P5K-E but the 0602 seems to be the best still.

http://3dxtreme.net/other/Q6600%20L7...-1.44-11hr.jpg
08-28-2008, 02:07 AM
Pneumonic

Quote:

Originally Posted by fatguy1992

THX I read the thread, but my prob is a bit different, I don't get an error just a crash. Anyway I don't think any real world situation would use 100% of a 4.0GHz Q6600's processing power.

I get the exact same thing unless my load temps are under 63c on my cores... anything over is instant crash.. I know iceman had similar issues on his 4.1ghz 8 hour primestable clock and a number of other people at OCUK have reported similar problems..
08-28-2008, 02:50 AM
fatguy1992

Hmm, well I watched my temps and they did go over 60C :D Also before I got my IFX-14 I had the stock cooler and I had the thermalpaste on wrong and it was running at 60C idle.
08-28-2008, 03:44 AM
whe3ls

60c at idle ,ouch...
08-28-2008, 04:30 AM
fatguy1992

LOL i'd never put a HS on before and the stock cooler is pretty S***.
08-28-2008, 05:05 AM
Pneumonic

I run my fans off a seperate power supply as they are 24v and eat 80watts each and whilst running some prime runs @ 3.9ghz to test the new setup the other day i forgot to turn them up (dont ask me how i forgot they are bloody loud enough at full voltage to notice they arent on) :D 102c was the only thing i saw coretemp flash before the machine shut down.. luckly no damage
08-28-2008, 07:48 AM
jcool

Quote:

Originally Posted by Pneumonic

I run my fans off a seperate power supply as they are 24v and eat 80watts each and whilst running some prime runs @ 3.9ghz to test the new setup the other day i forgot to turn them up (dont ask me how i forgot they are bloody loud enough at full voltage to notice they arent on) :D 102c was the only thing i saw coretemp flash before the machine shut down.. luckly no damage

:shocked::shocked::shocked:

Your fans eat more than my phase unit :rofl: :ROTF::ROTF::ROTF:

:rolleyes:

Have you checked whether your ears are still clinging onto your head recently? :D
08-29-2008, 01:28 AM
Pneumonic

Quote:

Originally Posted by jcool

:shocked::shocked::shocked:

Your fans eat more than my phase unit :rofl: :ROTF::ROTF::ROTF:

:rolleyes:

Have you checked whether your ears are still clinging onto your head recently? :D

They probably do :) but well is more experiment than day-to-day... I really want 4.1ghz 8 hours prime stable on air... and the old extreme air setup just wasnt man enough :)

some info here: http://www.xtremesystems.org/forums/...d.php?t=197519

and a whole build / clocking log here: http://forums.overclockers.co.uk/sho...php?t=17888722
08-29-2008, 04:14 AM
RaMmElEe

1 Attachment(s)

Quote:

Originally Posted by dnottis

I've found issues with the memory dividers causing stability issues with my overclock. I managed to get 3.8 prime stable, but when I game it will still crash on me. Dropped my memory to 1:1 and it's always fine. Running 4GB G.Skill DDR2-1100 which is memtest stable, so it's not the ram, but the divider on the board.

I've tried the latest bioses for P5K-E but the 0602 seems to be the best still.

I guest you might want to try some other bios version
08-29-2008, 05:36 AM
dnottis

Dropping to 8x mult helped me pass my wall. Keeping memory 1:1 also fixed the stability issues with ram dividers. Sucks to have DDR2-8800 and only run 960, but at least it's stable at 3.8Ghz now.

http://3dxtreme.net/other/Q6600%20L7....primedone.jpg
08-29-2008, 10:20 AM
kup

Quote:

Originally Posted by dnottis

Dropping to 8x mult helped me pass my wall. Keeping memory 1:1 also fixed the stability issues with ram dividers. Sucks to have DDR2-8800 and only run 960, but at least it's stable at 3.8Ghz now.

http://3dxtreme.net/other/Q6600%20L7....primedone.jpg

Can you post your bios settings for that FSB on that board? What bios are you on?
08-29-2008, 11:51 AM
whe3ls

nice i have maybe i lll start trying to 3.9or 4.0 stable instead of trying to get 3.6 stable
08-29-2008, 01:57 PM
whe3ls

so far so good at 3.8 voltage is way high ill fix that later but look at my temps.

http://img514.imageshack.us/img514/1123/ohsnapak8.jpg

nvm it crashed...
08-29-2008, 02:10 PM
Loser777

I got same prob here for 3.7/3.8, 5 mins then crash.
08-29-2008, 02:14 PM
whe3ls

i didnt have this problem my old max extreme or ip35
08-29-2008, 02:53 PM
dnottis

Quote:

Originally Posted by kup

Can you post your bios settings for that FSB on that board? What bios are you on?

I'll post pics of my bios tonight.

Using 0602, Asus P5K-E/Wifi

Show 100 post(s) from this thread on one page

*Official Retail G0 Q6600 Overclocking Thread*

Official Retail G0 Q6600 Overclocking Thread