Printable View
yeah i saw that too... i really don't understand why they keep putting these uggly green pcb on their RAM... really pretty coolers and "crappy" green pcb, too bad, 'coz except that detail, they look great on this mobo!!!Quote:
Originally Posted by redphil
can't wait to see what's next ;)
Get your magic marker out to cover the little green on the pcb, ;) lol
I've been looking at this case, to use with EVGA SR-2. It seams to fit, but I'm not sure. You guys seams to know this case inn and out, do you think a MB with Length: 13.6in - 345.4mm and Width: 15in - 381mm, would fit in this case?
I'm also wondering if it is possible to squeeze 2 x Corsair HX1000W into this case.
This build is amazing! I love the details you've attained too. It really shines.
Any chance you have a high resolution of this image?
http://img682.imageshack.us/img682/1984/img5212.jpg
Thanks!
I agree with you, mate, only some of the companies care about the looks at 100% :rolleyes:Quote:
Originally Posted by josk1
:D I'll give it a try, but not sure it will be good :)Quote:
Originally Posted by masik
sorry, can't measure it right now, will do tomorrowQuote:
Originally Posted by Sam_oslo
Thanks :up:Quote:
Originally Posted by mlee49
sure you can get it, just let me know what your e-mail is ;)
MB tray has about 430mm of height and 330mm of width + 50mm of distance between tray and drive baysQuote:
Originally Posted by Sam_oslo
=============================================
okay, time to finish PSU (finally LOL)
At the beginning I heatshrinked sleeving just near the PSU output but it turned out not good, at all. I remade it and now it's much better, let's watch step by step:
Slightly widened the hole, it was completely round at first. Bare metal edge can be fixed with Sharpie :)
http://img687.imageshack.us/img687/2519/img5883b.jpg
Then put all sleeving inside and fixed with zip ties. Also snipped SATA cables and 4-pin motherboard power cable.
http://img340.imageshack.us/img340/8369/img2470ly.jpg
And now there is only 4-pin molex left naked, will do it later while prefinal assembly to cut it to exact length.
http://img130.imageshack.us/img130/9302/img2497p.jpg
http://img576.imageshack.us/img576/5876/img2506d.jpg
Thx, sounds good.:) I'll put this case on my list and look closer at it.Quote:
Originally Posted by aka_GK
Nice... Progress! :p:
as if I have room to talk...
Excellent work on the PSU, my friend :clap: But why did you use insulating tape instead of heatshrink on the ends of the wires you've cut ? I know, it can't be seen from the outside, but nevertheless...
:)Quote:
Originally Posted by Wezly
I didn't have proper heatshrink, will redo it today ^^Quote:
Originally Posted by Tigris STI
So what's up with this build? Where you at, mate? I'm dying to see some updates.
oops, managed to miss your question :(Quote:
Originally Posted by y0gi
I am at university struggling through exams, hopefully they will finish by the end of this week and I'll please you with something new (end of this build for example :D).
And yeah, I have decided to change the last "old" part in this build, not hard to guess what is it :p: :D
Ahoy Kirill!
G.Skill Heatsinks on your FTW is FTW. Matches perfectly!
That board is indeed in very good hands!
Your photos are always a thing to behold for me.
Ahoy my mate!Quote:
Originally Posted by CptDreadFlint
thanks for your kind words and priceless help - wouldn't be possible without you ;)
=========================================
okay, finally have some free time to continue.
guess what? Hardware time! WC gear for this beauty is already cooooming :D
http://img819.imageshack.us/img819/3299/img2678d.jpg
Oooooooh, ahhhhh....
woot! new stuff!
http://img225.imageshack.us/img225/2210/img0004vp.jpg
Nice new stuff, aka_GK ;) Good to see you progressing on the build (and here I was, thinking I might beat you to the finish line :rofl:).
haha that's a good motivation :DQuote:
Originally Posted by shazza
ok. little bit of a progress
this thing was annoying me for the last 6 weeks, time to fix it
http://img413.imageshack.us/img413/9937/img0284pc.jpg
wow, fan doesn't have a rubber plug
http://a.imageshack.us/img412/1967/img0291fo.jpg
ready!
http://a.imageshack.us/img201/8858/img0293ng.jpg
done
http://a.imageshack.us/img256/9530/img0299c.jpg
did some measuring for future cuts
http://img812.imageshack.us/img812/7237/img0308q.jpg
finally got some G3/8" to G1/4" adapters to put black barbs instead of chromed ones
http://img153.imageshack.us/img153/9522/img0335wp.jpg
and here is the little teaser
http://img261.imageshack.us/img261/2945/img0339p.jpg
beautiful Kirill :) love the "tubing"
Fantastic build. I have Antec PSU too and will have to do same mod as you did to yours - cut out 4pin cpu power cable and sata cable, which is soldered.
Nice project, keep it up my friend!
Waiting for update..... Don't forget about us )))))
illidan, Mike, SPACEMAN (:D) thanks mates :)
here you go, finally slapped myself to do something, tiny update
Resoldered pump from 4-pin to 3-pin, quite straightforward:
http://img571.imageshack.us/img571/1791/img0718j.jpg
http://img831.imageshack.us/img831/2861/img0738d.jpg
found that it's good to paint the connectors with permanent if wires are of the same color
http://img842.imageshack.us/img842/8941/img0753k.jpg
and result! I had to adjust pump case a bit to let the pump fit with new wiring
btw, I sanded off the dents and repainted the pump case, now it is nice black and smooth :)
http://img545.imageshack.us/img545/717/img0761y.jpg
this is where it is going to be
http://img155.imageshack.us/img155/6761/img0768xx.jpg
and the magic snap caps worked great
http://img213.imageshack.us/img213/7113/img0771z.jpg
Sweet! Good job on those wires. Pump is looking great in the case! I like those caps, give nice clean effect.
Thanks Mike :)
===============
Did some more cabling and sleeving, now the lights - cut 4-pin molex, crimped 3-pin fan things to hook it up to the built-in rheobus
http://img545.imageshack.us/img545/4198/img0854ts.jpg
and sleeved (zip tie mount is temporary :D)
http://img842.imageshack.us/img842/5615/img1159t.jpg
http://img207.imageshack.us/img207/217/img0866lh.jpg
http://img706.imageshack.us/img706/3695/img1162fh.jpg
lights off, LEDs on :)
http://img690.imageshack.us/img690/4945/img0869g.jpg
and sleeved door fans power as well, goes right up to the koolance control stuff
http://img228.imageshack.us/img228/6442/img1156ds.jpg
Then something more exciting:
I got round brass stand-offs
http://img831.imageshack.us/img831/1869/img1166ug.jpg
sanded the part, marked medians aaaand... got an issue with soldering :shakes:
http://img818.imageshack.us/img818/4289/img1175z.jpg
now I need to find a good brick or something to heat up the detail properly - solder just doesn't stick to it now, will continue soon ;)