DFI UT X58-T3EH8 continued - Part 2

Printable View

Show 100 post(s) from this thread on one page

06-23-2009, 12:30 AM
p2501

memtest test 5 run fine here too.
06-23-2009, 12:31 AM
ci2kla

How about try using 6x multi on DRAM but 18x multi on UNCORE?
Try test it using LINX...

For more testing, maybe try only 2 sticks, different slots, or loosen the RTL
06-23-2009, 02:54 AM
Razer(x)

Hi, i have the same problem, OCZ Platinum too.
06-23-2009, 03:09 AM
p2501

Quote:

Originally Posted by ci2kla

How about try using 6x multi on DRAM but 18x multi on UNCORE?
Try test it using LINX...

For more testing, maybe try only 2 sticks, different slots, or loosen the RTL

Thanks but I think I found it. Before I played musical chairs with the memory I set the DRAM switch frequency to increase by 15%. And I left it at that. Now I have every stick running on the channel it fits and I didn't think about the switch frequency setting. As a last resort I remembered and finaly, they like decrease 15%. Result: 20 runs LinX fine. :up: *dances the happy dance*
06-23-2009, 03:17 AM
Razer(x)

Quote:

Originally Posted by p2501

Thanks but I think I found it. Before I played musical chairs with the memory I set the DRAM switch frequency to increase by 15%. And I left it at that. Now I have every stick running on the channel it fits and I didn't think about the switch frequency setting. As a last resort I remembered and finaly, they like decrease 15%. Result: 20 runs LinX fine. :up: *dances the happy dance*

Can you post your bios settings? I can't solve, if i reboot i lost stability :down:
06-23-2009, 04:09 AM
cheapseats

not copy waza stable yet :( :D

205bootup + PCIE 110

vTT 1.39 + 0.1375/0.01500 set

tRCD/tRP/tRAS/tRFC set in BIOS, others CPUTweaker

LSC on / maxmem 680 / core 1 affinity / no waza

220x21 / x16 uncore / x8 memory / 6-6-6-18

http://i447.photobucket.com/albums/q..._32M_7m49x.gif

220x21 / x18 uncore / x8 memory / 6-6-6-18

http://i447.photobucket.com/albums/q..._32M_7m47x.gif

220x21 / x18 uncore / x8 memory / 6-6-6-18 / tWTR 12

http://i447.photobucket.com/albums/q..._32M_7m46x.gif

220x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12

http://i447.photobucket.com/albums/q..._32M_7m46x.gif

221x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12

http://i447.photobucket.com/albums/q..._32M_7m44x.gif

-------------------------------------------------------------------------

32M runs/timing tests (x10 memory)

screenshots + waza runs

http://i447.photobucket.com/albums/q...est-result.gif
06-23-2009, 05:04 AM
ci2kla

Quote:

Originally Posted by cheapseats

not copy waza stable yet :( :D

205bootup + PCIE 110

vTT 1.39 + 0.1375/0.01500 set

tRCD/tRP/tRAS/tRFC set in BIOS, others CPUTweaker

LSC on / maxmem 680 / core 1 affinity / no waza

220x21 / x16 uncore / x8 memory / 6-6-6-18

http://i447.photobucket.com/albums/q..._32M_7m49x.gif

220x21 / x18 uncore / x8 memory / 6-6-6-18

http://i447.photobucket.com/albums/q..._32M_7m47x.gif

220x21 / x18 uncore / x8 memory / 6-6-6-18 / tWTR 12

http://i447.photobucket.com/albums/q..._32M_7m46x.gif

220x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12

http://i447.photobucket.com/albums/q..._32M_7m46x.gif

221x21 / x18 uncore / x8 memory / 6-6-5-18 / tWTR 12

http://i447.photobucket.com/albums/q..._32M_7m44x.gif

-------------------------------------------------------------------------

32M runs/timing tests (x10 memory)

screenshots + waza runs

http://i447.photobucket.com/albums/q...est-result.gif

Great result!
Good to see you here Cheapseats :p:
06-23-2009, 08:21 AM
Longbow

Quote:

Originally Posted by rioja

Longbow
ver 2.1

Sorry for the late reply. I used to have the same memory as you but I sold it. v2.1 Dominators are elpida ICs. Like you, I had trouble in stabilizing my overclock @ 200mhz and above with my D0. Whats worse is, the more voltage I add, it just made it worse. I had trouble with my C0 as well, but it wasnt as bad as my D0. Im convinced this board has issues with elpida ICs+D0s. Try borrowing another ram set and try again. Prefferably OCZ as I had better luck with my Intel extreme sets.
06-23-2009, 09:10 AM
eva2000

nice work cheapseats pretty spot on

http://fileshosts.com/intel/DFI/DFI_...6s422ms_tn.png
06-23-2009, 09:21 AM
Peen

So this board is good with Xeon? stupid Mwave are a bunch of boners and wont RMA my barely hurt board... so need a new one. Cant decide between this or Rampage II Gene??
06-23-2009, 09:24 AM
eva2000

Quote:

Originally Posted by Peen

So this board is good with Xeon? stupid Mwave are a bunch of boners and wont RMA my barely hurt board... so need a new one. Cant decide between this or Rampage II Gene??

No probs with W3520 here with DFI UT X58-T3EH8 @4877Mhz on Water cooling http://i4memory.com/f80/w3520-h20-48...8-t3eh8-18198/ :D
06-23-2009, 09:31 AM
Peen

Hmm think I may get this over the Rampage II gene. Unless someone can sway me to the Gene hehe
06-23-2009, 09:41 AM
The Nemesis

Quote:

Originally Posted by Peen

Hmm think I may get this over the Rampage II gene. Unless someone can sway me to the Gene hehe

Ive got both, unless u need matx definetly go DFI:up:
06-23-2009, 10:07 AM
Razer(x)

Quote:

Originally Posted by Razer(x)

Hi, i have the same problem, OCZ Platinum too.

Any suggestion? :(
06-23-2009, 10:08 AM
Peen

Quote:

Originally Posted by The Nemesis

Ive got both, unless u need matx definetly go DFI:up:

Awesome, thanks I will for sure get the DFI :up:

Whats the diff between T3EH6 and T3EH8?

And whats the prob with OCZ Plat I see above my post? I have that ram. Thanks
06-23-2009, 10:09 AM
p2501

Okay. Now it gets annoying, I rebooted to save the settings that ran 20 passes of LinX fine, after reboot everythings as unstable as ever. Insta BSOD.
06-23-2009, 10:13 AM
Razer(x)

Quote:

Originally Posted by p2501

Okay. Now it gets annoying, I rebooted to save the settings that ran 20 passes of LinX fine, after reboot everythings as unstable as ever. Insta BSOD.

I told you, you have the same problem of mine :shakes:
06-23-2009, 10:21 AM
p2501

Quote:

Originally Posted by Razer(x)

I told you, you have the same problem of mine :shakes:

Okay, well then I'm officially out of ideas. How can one setting be stable and at the same time unstable after reboot? :confused:

Quote:

Originally Posted by Peen

And whats the prob with OCZ Plat I see above my post? I have that ram. Thanks

Basically it's problematic somehow to get them to work at 1600 (combined with BIOS 0508 and W3520).
06-23-2009, 10:23 AM
Razer(x)

Quote:

Originally Posted by p2501

Okay, well then I'm officially out of ideas. How can one setting be stable and at the same time unstable after reboot? :confused:

I really don't know. I've tried a lot of config/settings, the vtt/vdimm ratio is ok, but everything's unstable after the reboot. Nothing to do :shrug:

EDIT: Isn't a cpu problem, 'cause i'm with a 920 D0. But we have the same kit of rams, so.....
06-23-2009, 10:27 AM
p2501

Quote:

Originally Posted by Razer(x)

I really don't know. I've tried a lot of config/settings, the vtt/vdimm ratio is ok, but everything's unstable after the reboot. Nothing to do :shrug:

EDIT: Isn't a cpu problem, 'cause i'm with a 920 D0. But we have the same kit of rams, so.....

Maybe we're coming back to my hunch with the subtimings. Sadly I didn't do a screenshot of the working configuration. The BIOS sets the RTL values to 50-52-53 at 1600, but far looser at 1200, that is one point I don't understand.
06-23-2009, 10:29 AM
Razer(x)

Quote:

Originally Posted by p2501

Maybe we're coming back to my hunch with the subtimings. Sadly I didn't do a screenshot of the working configuration.

Really don't know. Now i'm with the 227 bios (suggested for this problem with Boot Up Base Clock 135 by BlackDragon) and memory running at 1800mhz 8-7-7-20.

Stable, but unstable after reboot. As far as i know, anybody has solved this problem.
06-23-2009, 10:35 AM
Peen

Quote:

Originally Posted by p2501

Okay, well then I'm officially out of ideas. How can one setting be stable and at the same time unstable after reboot? :confused:

Basically it's problematic somehow to get them to work at 1600 (combined with BIOS 0508 and W3520).

Great and I just ordered the board. Is it due to the bios or something?
06-23-2009, 10:36 AM
Razer(x)

Quote:

Originally Posted by Peen

Great and I just ordered the board. Is it due to the bios or something?

Nope, it doesn't. There's a kind of incompatibility, but i don't know what chips this ram mounts. :shrug:

Sorry 4 my english.
06-23-2009, 10:58 AM
ChaosMinionX

Quote:

Originally Posted by p2501

So now there's 3 people having problems with running their memory at 1600. We need someone who knows his/her way around mem subtimings. I forgot to add that for me this behaviour started when I set the bootup base clock to 185 to get rid of this annoying reboot-at-26. Before the setup with 1600 was good for 9 LinX runs before BSOD.

I noticed using CPU Tweaker that my sub timings did not match the XMP for my Dominator 1600CAS8 stuff.... I manually set some stuff like TRFC, did the TRRD set to 14 so it shows up as 6 and some other timings. I also +1 to Channel C on RTL it seems to be doing a little better.
06-23-2009, 11:47 AM
p2501

Quote:

Originally Posted by ChaosMinionX

I noticed using CPU Tweaker that my sub timings did not match the XMP for my Dominator 1600CAS8 stuff.... I manually set some stuff like TRFC, did the TRRD set to 14 so it shows up as 6 and some other timings. I also +1 to Channel C on RTL it seems to be doing a little better.

Did you find some kind of spec sheet for your ram to set the timings or did you try around for a bit? Would be nice to know if something like that exists for OCZ memory.

What bothers me the most is that one boot is stable, the next is not.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 07:12 AM.

XtremeSystems