Xtreme Twinmos Memory!

Printable View

Show 100 post(s) from this thread on one page

07-06-2005, 01:53 AM
mike047

HI,
I believe the "50I" chips are .11 Power chip. CADT :(
07-06-2005, 02:34 AM
Crazykooter

Quote:

Originally Posted by mike047

HI,
I believe the "50I" chips are .11 Power chip. CADT :(

Oh well so I wont be doing much ocing with them then. :(
07-06-2005, 09:33 AM
DeltZ

Quote:

Originally Posted by Crazykooter

I dont have the sticks yet. Its a long story but they got sent to wrong person when I rma'd them but the guy who has them sent me the chip #'s. I tried to see if they had 2 dots like UTT but I didnt get a answer. I am thinking these are just generic sticks of ram. Plus I am not expecting any oc out them. I have tried to look them up on google but I dont get anything on them. If they are junk sticks they will work well in my folding rigs. :slap:

found out...they don't have the dots :(
07-06-2005, 09:33 AM
AMD-me

So what does the dimple in the lower right hand corner mean? power chips?
07-06-2005, 09:37 AM
Korpse

just a really bad update on my regulat TM 50D UTT

currently at 260mhz 1.5-2-2-5-7-16 with 3.5v :D 2x512mb sticks

this stuff rocks
07-06-2005, 01:37 PM
mike047

Quote:

Originally Posted by Crazykooter

Oh well so I wont be doing much ocing with them then. :(

Hi,
The set I have will run 230 with an XP 2400 mobile. [2.5-3-3-11] . It is on a vdimm modded Albatron KX18D, Voltage over 3.0 doesn't make any difference. I run it at 2.97v.
07-06-2005, 07:47 PM
AMD-me

So I take it this stuff doesnt ship with winbond chips anymore?
07-07-2005, 01:51 AM
mike047

Quote:

Originally Posted by AMD-me

So I take it this stuff doesnt ship with winbond chips anymore?

Hi,
The last 4 sticks of Twinmos SP PC3200 [256] that I bought from New Egg was 1A4T[utt/BH-5?] 44B chips with all the dots, etc.

New Egg doesn't have any SP listed right now:(
07-08-2005, 12:38 PM
Crazykooter

Well the new non speed premium twinmos is garbage ram. It doesnt oc for nothing. Oh well. I was expecting it. Just to let yall know so you dont buy this stuff if ya want to oc. :fact:
07-09-2005, 04:16 PM
omga14

Quote:

Originally Posted by mike047

Hi,
The last 4 sticks of Twinmos SP PC3200 [256] that I bought from New Egg was 1A4T[utt/BH-5?] 44B chips with all the dots, etc.

how did those 44B chips perform. the 2x512 bh-5 sticks i have are the same chips. i'm waiting on an rma for my cpu(bad mem controller) and was wondering if they're fairly decent or not. better, as good, or not as good as the 50D chips?
07-09-2005, 04:37 PM
mike047

Quote:

Originally Posted by omga14

how did those 44B chips perform. the 2x512 bh-5 sticks i have are the same chips. i'm waiting on an rma for my cpu(bad mem controller) and was wondering if they're fairly decent or not. better, as good, or not as good as the 50D chips?

I haven't had any 50D's, but the 44b's I don't like as well as the 44D's.
I am still on XP platforms, so I don't know how it would do on a 64.
I actually was happy to get the 44b but after trying it out a little, I was disappointed. Maybe with more testing I'll grow more fond of them:D
07-10-2005, 12:08 AM
omga14

so what have you been able to get out of em' so far?
07-10-2005, 03:19 AM
mike047

Quote:

Originally Posted by omga14

so what have you been able to get out of em' so far?

HI,
220, if I remember correctly, the 44D's go about 230 but with more voltage[3.375v] @ 2-2-2-11. I didn't test the 44b's real hard yet.

These numbers are capable of 24/7 folding, prime95/OCCT stable.
07-11-2005, 07:09 AM
UnreaL

I have 1 stick which does 2.5-3-3-8 @2.8v 1T apsolutely fine. I have had this stick for ages and works a treat.

My other stick (fresh from RMA, still AA4T) fails memtest 2.5-3-3-8 @2.8v 1T. It is apsolutely fine at 2T but fails 1T.

Does this mean a bad stick (and I can RMA?) or is this just... really unlucky? I mean will a burn in help or am I just stuck ...?
07-11-2005, 09:03 AM
uwackme

hmmm

It means the new stick needs MORE than 2.8V to operate. Give it 3.0 and see what happens.
07-13-2005, 09:24 PM
xenolith

So is TMSP no longer produced and distributed in the US? Can't find them anywhere...
07-14-2005, 04:52 PM
gundamit

Yep. The party is over. No more cheap CH-UTT AA4T. Whatever loose ICs available were likely snatched up my the boutique memory companies. BH 1A4T may only be in the Europeon market under the "Twister" branding.
07-15-2005, 08:58 AM
raydelee

hello Xtreme Member,

me recently just bought dfi ultra-d , there are so many memory timing setting in the genie bios
so confuse, anybody here can just help me to set the timing on my UTT running 250fsb@3.4v (using booster) from the first line to till the last
thx
07-15-2005, 09:14 AM
Garrett

Hello raydelee, the term "Xtreme Member" is given to Registered Users who have 100 posts and more... when they get 1000 posts they are called "Xtreme Addict" if i recall correctly ;)
07-15-2005, 10:24 AM
raydelee

Quote:

Originally Posted by Garrett

Hello raydelee, the term "Xtreme Member" is given to Registered Users who have 100 posts and more... when they get 1000 posts they are called "Xtreme Addict" if i recall correctly ;)

sorry! i'm just newbie here :toast:
07-16-2005, 02:01 AM
Family man 72

1 Attachment(s)

Added another 2x512MB of Twinmos SP3500 BH-5. After some burn-in these are windows-memtest, SPI32M, 3DMark, etc stable clocks. Here's SPI1M for comparison:
07-16-2005, 09:22 AM
fareastgq

easiest way to hit 250, set your ram timings to 1T, run a 1:1 ratio, set your main 4 timings to 2 2 2 6-10, set everything else to auto. crank the volts :) Once you find a stable spot, then u can tweak the rest of the timings.
07-20-2005, 02:11 PM
Techmasta

Don't order any of the TMSP from Newegg's refurbs no matter how tempting it is. I ordered two 512mb sticks; one wasn't SP and the other errored in memtest at the rated speed and timings at any vdimm.

Time to RMA these sticks and order some Value VX...
07-24-2005, 10:29 PM
nie_realny

:welcome:

I am greet unhappy :shrug: ( I as yet) owner 4x512MB Twinmos I have BH5 UTT 1A4Tgdyż problems with achievement stable settings (even SPD) :{

All on 2x512B is OK

I wait on help :) you can pass (how mat 4x512MB) your settings from biosu

My config this:

DFI NF4 Ultra - D bios 412-2, A64 3000 + venice, chieftec 420W,

I apologize for my English
07-24-2005, 11:21 PM
omga14

how much voltage are you giving the ram? you might need 2.9v's or more just for stability.

Show 100 post(s) from this thread on one page