does anyone know why the "new" bh-5's aren't performing like the old bh-5's? i'm really hoping that these bh-5's i have just need to burn in for a couple of months and then start showing some real overclocking potential like the old bh-5's.
Printable View
does anyone know why the "new" bh-5's aren't performing like the old bh-5's? i'm really hoping that these bh-5's i have just need to burn in for a couple of months and then start showing some real overclocking potential like the old bh-5's.
Why what's wrong with them?..... mine don't seem to be any better than my original bh-5. Both will do 260 with the right timings and lots of voltage. Burn-in helps out too.Quote:
Originally Posted by omga14
Now, is my turn. I can run TWSP and Kingston Value Ram (Hynix BT D 43 chipset) in dual channel on memory divider (DDR333). They can hit 270mhz @ 3vdimm. Actually they can go 280Mhz but failed SuperPi even at 16k.Quote:
Originally Posted by Aslinger
My sig
-----------------
Winnie 3000+@2430Mhz@1.55vcore
DFI NF4 Ultra-D (Rev.A3) Bios 615
TwinMos SP UTT 256mb x 1 (Another stick is faulty due to cold boot?? Will RMA soon) and Kingston Value Ram (hynix BT D43) 256mb x1 @ 2.5-3-3-7@3vdimm (Memory divider DDR333)
Leadtek PX6200TC 64mb (supporting 256mb) @ 410/710
IDE Hitachi 80GB 7200rpm 2 mb
LG 16X DVDROM
Gigabyte 52X CDROM
Panasonic Floppy
icute 420 watt PSU (20 pin)
can anyone tell me whats the average oc of this speed premium model, maybe 250 2-2-2-5 on amd64 3.3v??
http://www.madboxpc.cl/catalogo/prod...roducts_id=701
these are 50% cheaper than ocx vx here, we dont have mushkin redline.
cl? what country is that ??
chile?
Good news for u guy : many Twinmos non SP 2x512 (week 05244, 1A4T) using Winbond chip. My one for sure BH-5, do 2-2-2-2 @ 200 only 2.7V.
Take it hurry :D
Quote:
Originally Posted by metro_oc.cl
Yes, at least 250@2-2-2-5@3.4V. I had 2 pair of this RAM and both do 250@2-2-2-5@3.3V in A64 system
thats right thanks for the answersQuote:
Originally Posted by high5
Yeah, no burn in mine did 2-2-2-5 1T 250mhz 3.28V.
these are mine. same week PC3200 BH-5's. i am rma'ing my cpu cause i think it has a bad mem controller. one stick is fine in all dimms but when i put both sticks in i get errors even at stock speeds. on does 240mhz and the other 235mhz. both @3.1v's. it looks like they have the potential to be decent overclockers but now with the mem controller being like it is. yes i even tried 2T. this is all on a DFI LanParty UT 250gb(s754).
http://img112.imageshack.us/img112/1...3200bh50gc.jpg
Same week and model as me. Don't BH-5's just not 'work' on the nF2 though? There have been lots of reported problems getting them to run so perhaps the mem controller was fine?
maybe it's this week not cooperating together. seems strange though. same ic chips and all should work just fine. i could see maybe not overclocking as well but not working at all? also i'm using and nf3 dfi mobo. here are a couple of pics of my IC chips:
http://img235.imageshack.us/img235/9435/icchip9rq.jpg http://img235.imageshack.us/img235/4562/icchip22uc.jpg
Exact same ones as mine. Two individual sticks currently running in dual channel. Of course, you can't get dual channel so there should be less compatability issues with the two compared with attempting to run dual channel. I know a two people who had nF2's and their BH-5 would just not work. Some others it did work. I'm sure if you ask about enough you will find someone who actually knows what they are talking about (unlike me :p) about this issue.
thanks for attempting to help out. mind you i don't have and NF2 motherboard i have and NF3 motherboard. it's in the sig.
also does anyone know how the 44B ic chips are performing compared to the 50D ic chips? i have been doing a search but going through 100+ pages of posts is quite tedious and confusing since i keep thinking i missed something and keep going back.
OMG of course you do! Sorry it's 2:30am here and obviously i need some sleep! So sorry. nF2 was sktA not 754 :( which i know when i'm awake. :)
no prob. rest well bro'. i'm not gonna get any sleep while i wait for my rma. sending it out tomorrow. could have last week but don't trust mail service over holiday periods. i'll post how it works out.
My twinmos :cool:
<a href="http://www.shrani.si/pics/25534725.jpg"><img src="http://www.shrani.si/pics/25534725_thumb.jpg" border="0"></a>
i notice your cpu-z says 512mb for the ram. are you running one 512 or 2x256? my issue has to deal with 2 sticks in the comp at once. individually i can do decent overclocks on the ram.
I never thought these sticks (TMSP CH-UTT) really like low timings in the way they actually seem to do:
I was dabbling with bios/memtest to find 110% stable 24/7 (mem)clocks. I started from 200MHz 2-3-2-6 @ 2.5v. It runs flawless. Happened to try "defaults" - 2.5-3-3-8:
No boot @ 2.5v!
:rolleyes:
I rma'd my UTT twinmos and this is what I am getting back. Not good I think.
0522D
TMD7608F8E501
and the little sticker on the ram says...
M2G9J16A-TT
Not sure what this stuff is but I will find out more on thursday when I get it.
maybe it's the new DH everyone has been dreaming about?:) well either way let us know how it pans out.
what do you think these chips could be?
"TwinMOS 0348D TMD7608F8FE50D"
will try and find out if they have the dots...
I dont have the sticks yet. Its a long story but they got sent to wrong person when I rma'd them but the guy who has them sent me the chip #'s. I tried to see if they had 2 dots like UTT but I didnt get a answer. I am thinking these are just generic sticks of ram. Plus I am not expecting any oc out them. I have tried to look them up on google but I dont get anything on them. If they are junk sticks they will work well in my folding rigs. :slap:Quote:
Originally Posted by DeltZ
What kind of module is this?
http://www.newegg.com/Product/ShowImage.asp?image=20-218-062-03.jpg,20-218-062-02.jpg&CurImage=20-218-062-03.jpg&Type=Refurbished&Description=TwinMOS%201GB% 20(2%20x%20512MB)%20184-Pin%20DDR%20SDRAM%20DDR%20400%20(PC%203200)%20%20U nbuffered%20System%20Memory%20Model%20TMII400/1GB%20-%20OEM