Yeah, timings between brackets are the official memory rated timings. It doesn't deal with "memory can hold 2-2-2-5".Quote:
Originally Posted by Wired-HoH
Printable View
Yeah, timings between brackets are the official memory rated timings. It doesn't deal with "memory can hold 2-2-2-5".Quote:
Originally Posted by Wired-HoH
Ammmmm mybe i sell my OCZ VX 2x512 and buy 4x512 twinmos SP AA4T UTT that do you think all? should i do it?
or should i keep it and 1GB is good for now? :)
It depends on what you do with your PC :D.Quote:
Originally Posted by TommyW
I want to OC till it burn LOL
How do your VX perform? :DQuote:
Originally Posted by TommyW
Dont know cant test them yet waiting for mobo and cpu i few days ago i burn my axp 1800+ and mobo so i cant test them :p: :p: ohhh i burn it just for fun :) :)
List updated with new G.Skill with Winbond UTT on BP PCB 808!!!
G.Skill
G.SKILL PC3200(DDR400 1T) (2-2-2-5 1T), (F1-3200BWU2-512MBGH/1GBGH) --chip--> Winbond UTT ~ Brainpower PCB http://m4tribes.m4d.it/puni/new.gif
1GB Kit official results:
2-2-2-5 a 200 Mhz a ~2,5V
2-2-2-5 a 213 Mhz a ~2,6V (stock voltage)
2-2-2-5 a 250 Mhz a ~3,3V
2-2-2-5 a 260 Mhz a ~3,5V
SPi 1MB @ 260 Mhz:
http://www.ocxtreme.org/onepagebook/...H/ddr520pi.jpg
Bye! :D
Confirmed that the TCC4s will do CAS 2 just fine. Keep in mind the general bell curve of statistics. Everything can't do everything :)Quote:
Originally Posted by Punisher!
I bought two Mushkin blue 512 2-3-3-6 from Fry's on Friday. I get them in, throw them in the rig and I set everything to auto, try cranking up my fsb.. it pukes at 210x10 LDT3 1:1 1.425V | 3.2 vdimm. So I'm pissed, this sucks, my PQI mem allowed me 255 without a sneeze. Tonight I am messing around and while looking at the Everest numbers I notice hey, these two sticks have diff part numbers according to this, what gives? So I check CPUZ.. yep, diff parts again, how about Sandra.. yep. I shut it down, swap sticks, same deal reverse. I shut down again and run the one stick that is the oddball which by the way is rated 2-2-2-6.. same deal part number is diff from what is on the sticker and on the website. (8928 for those that are inquisitive)
I am bored, its midnight and I have to get up for work but what the hell.. I notch them down to 1:1 2-2-5-2 everything else on auto.. raise the vdimm to 3.2 (I have active cooling on my ram, they aren't even warm.) I raise the fsb to 210.. then 220, 230. My multi is at x10 and my LDT is at 4 and this thing is running like a champ on 230 and passes memtest 5&6 twice no errors. Last night I could not squeeze 210X10 LDT 3, right now as we speak I am at 240 and will leave it overnight on Prime95 to see if it melts. I have a small problem, this phantom chip is not listed on Mushkin's site so how do I get another one of these bad boys?
The 27c is courtesy of Shin Etsu thermal paste.. I replaced my AS5 with this stuff and its a full -3c.. right now it is idling at 24c~25c. yummy.
http://img.photobucket.com/albums/v2...eR6/230200.jpg
Where are the G-Skill's 4800FF for god's sake?
Can some one post a link to shop where I can buy a 1GB kit?
The rep said it will be shortly available after CeBIT. :confused:
are you sure the ocz 3200 rev 2 can do 300fsb and up???
this review has it only at 280
http://www.cluboverclocker.com/revie...el_rev2/p3.htm
It depends on the stick luck... http://www.anandtech.com/ has them @ 300 Mhz.Quote:
Originally Posted by calcal
http://www.newegg.com/app/ViewProduc...231-002&depa=1
http://www.newegg.com/app/viewproduc...146-890&DEPA=1
which one would you go for?
got a link to where it hit 300fsb?
HTT is just the amd term for fsb right?????? Sorry AMD ELLITERATE : ( :(
_
List updated with:
Buffalo PC3200 CL2 (2-2-2-4) --chip--> Samsung TCCD ~ Brainpower PCB
SimpleTech Nitro PC4000 (3-4-4-8) --chip--> Hynix D5
Kingmax Hardcore PC4000 TSOP (3-4-4-8-1T) --chip--> Hynix D5
Bye! :D
I would like to know too. Anybody have an ETA on these?Quote:
Originally Posted by Hombre
If it has been posted before I have not seem it :)
I have seen both OCZ PC3200 P. Rev. 2 (anandtech.com) and LC @ 300 FSB.Quote:
Originally Posted by calcal
how good is the hynix d5 chipp?
Generally capable of CAS 2,5-4-4-8 @ ~250 Mhz, so quite good.Quote:
Originally Posted by Snowman89
capable of 300 3-4-4-8 1T, or close?Quote:
Originally Posted by Punisher!
I am quite sure you will be able to go just around 280-285 Mhz fully stable.Quote:
Originally Posted by Snowman89
Hynix B on the other hand are capable even of 320-330 3-4-4-8 1T.
any1 tested the new PQI pc3200/4000 TCCD ....perhaps even the 2*1gb dual kit...
anyone know much about Samsung TCCB chips? I have a stick of 512 that says PC2100...yet when I did a search on google, a lot of hits came up with Mushkin PC3200 DDR-400 Cas 2-2-2-5.
I may put it in and see what it'll do if that's the case.
thx
Update:
Made some additions\corrections.
I bought Twinmos PC3200, model TMII 400 and are NOT winbond.
here is some info:
0508D
TMD7608F8E501
This only have one dot at bottom right. They perform only as high as 235 no matter what juice u give them. I tried from 2.8 to 3.5 and won'0t go any higher then 235. This new Twinmos perform a lot worse and not UTT chips