Wow Uber, that's really sick! :slobber:
If you can take a screenie @360, you should be able to run benches @ at least 340, no?
Printable View
Wow Uber, that's really sick! :slobber:
If you can take a screenie @360, you should be able to run benches @ at least 340, no?
I think so but its CPC off so benches sux.
Will the board be able to handle 3x512MB Crucial Ballistix at DDR400 or will they run DDR333 like most other boards?
forgot to add my highest HTT speed achieved hehe
http://www.fileshosts.com/AMD/DFI/60...5-1.7/cpuz.jpg
http://www.fileshosts.com/AMD/DFI/60...7/mem-buff.jpg
http://www.fileshosts.com/AMD/DFI/60...1.7/pifast.jpg
any higher than 372HTT won't boot pc
heheh :D
nice george :toast:
what was the highest 1:1 you could get?
with 2-2-2-6 timings best 1:1 is 270mhz at 3.52-3.56v
http://www.fileshosts.com/AMD/DFI/60...uperpi-32m.jpg
:D
i'll try some other ram i have to see what more loose timings do :)
pretty nice eva.. MY EB does 265 2.5-2-2-0 1:1 i have a bh-5 stick i need to test altho..
Whats the highest 3v you guys run? i have a ocz 520w, and it goes from like 3.4 to 3.7 with a Slight touch..
Hey guys i'm trying to figure out what to set the tref at in the bios. What would this be in the bios ?
just leave it alone ;)Quote:
Originally Posted by Klisp
EVA2000: What is your secret reaching 372MHZ :slobber: with a NC.
What are your settings in the bios??
This is my max. (HTT=AUTO) 1/2 devider.
http://www.xs4all.nl/~famchow/A64_34...320MHz_HTT.JPG
Is ther many that has prob running this board whit EB memory?
Whit my PC3700 EB stick it only bootes 1 og 10 times.
Have to clear cmos often and start the board whit a pc2100 twinmos chip.
Quote:
Originally Posted by Fosco
have u tried the latest bios or the beta one?
Has anyone used an aftermarket chipset cooler on this board with a 6800 ultra? It looks to me like the ultra overhangs the chipset too much.
I can't hit 2.4 stable no matter what I do. I hit it stable with my friends GEIL memory. But with my RAM which is Infineon PC3200 512 I can not no matter what settings I do and how much voltage I run to it. I always end up getting a memory dump error. I am trying this with only one stick in as well.
And to ask another thing. What does it mean when you get the "Detecting Array" message? I know it doesn't like the setting when that comes up but does anyone know why exactly it comes up?
*EDIT* Has anyone figured out settings for MBM or do they know of any support for it that is coming soon? I do not like this program that came with it. MBM is the sh*t and I really want to use it on this board.
Yea, its a known prob. Youre going to have to go with a 1u chipset cooler or something with that long video card. You could use one of those copper iceberg thingies, its not very tall but it doesnt cool as good as the Swifty unit.Quote:
Originally Posted by chunkylover77
"I can't hit 2.4 stable no matter what I do. I hit it stable with my friends GEIL memory. But with my RAM which is Infineon PC3200 512 I can not no matter what settings I do and how much voltage I run to it. I always end up getting a memory dump error. I am trying this with only one stick in as well."
"And to ask another thing. What does it mean when you get the "Detecting Array" message? I know it doesn't like the setting when that comes up but does anyone know why exactly it comes up?"
"*EDIT* Has anyone figured out settings for MBM or do they know of any support for it that is coming soon? I do not like this program that came with it. MBM is the sh*t and I really want to use it on this board."
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
lets take them one at a time.
first, your problem is your ram obviously, so for you to get what you want, you need different ramski, plus each cpu clocks differently, although that 3200 should be getting 2400 easy, prolly some more in her..........
second, go into bios and start figuring some stuffs out, once you disable raid in the bios, it will go away.......shakes head, muttering.............
third, as far as MBM, big deal, the proggie that comes with the board works and gives some nice info, i am sure MBM will comes up with some changes, just hasn't happened yet, sorry to dissappoint you................but they will move at their own speed, not yours.
and to finish, i have had excellent results with my board, only problem so far is getting the OCZ ram booster to work properly.................sorry to hear of your problems, all of them are solvable......................
running 7.5x326, ram @244 (PC3500, BH-5 stuffs), this is with a 2800+ unit, and with the stock cooler so far.
baldy :D
RAID is disabled...it does it when the CPU hangs up. And I have decided to order some OCZ EL Plat Rev. 2 RAM. Hoping when I get that it will recieve some pretty nice clocks. I am hoping to get atleast DDR550 with 512x2. But I have also hit 2.4 stable with a stick of a friends RAM. So that solves that lol Only thing that sucks is that I need to wait until my paycheck deposits in wednesday because I don't want my bank account to go too low. So until then I am stuck with this sh*ty memory lol
"RAID is disabled...it does it when the CPU hangs up."
>>>>>>>>>>>>>>>>>>>>>>>>>>
in the post i replied to.
yes, it will show up when clocking and the board or whatever balks, it has happened with mine when really pushing everything to find limits.
baldy :cool:
You could always put a CPU cooler on the vid card. I have an old Alpha cut down to fit my X800, and my Swifty NB cooler fits. You just wanna be careful puttin in the vid card, it is a close fit. ;)Quote:
Originally Posted by chunkylover77
you can also download the modded BIOS, you can take it up to 4v supposedly if your rail can go that high . I'm running 3.4v in my BH-5, my PCP&C can adjust to 3.65vQuote:
and to finish, i have had excellent results with my board, only problem so far is getting the OCZ ram booster to work properly
:stick:
Bios settings were 1:2 divider ram at 2226 1T with LDT = AUTO and everything else AUTO with vdimm = 3.46v and chipset = 1.7vQuote:
Originally Posted by kakaroto
it won't boot at 373HTT
btw for folks who seem to experience the boost screen hanging before drive detecting, all you need to do is press any keyboard once and it will quickly continue to boot :)
I got 3 of the DFI boards 2 days ago. I just loaded them up last night. Im using my DDR booster on one of them 3.7v, my good BH5 PC3500 hyperx which maxes out @ 265 1:1 222 in every other board makes it to 275 in the dfi.
Where's the 4v dfi bios so i dont have to seach the hell out of this thread, Someone send it to me @ tedinde@xtremesystems.org if you would. Thanks in advance.
Im using my newcastle chip in it. and runs @# 350htt no problem.
Quote:
Originally Posted by Tedinde
http://www.ocforums.com/showthread.php?t=328318
Put your chipset back at v1.6, From my testing and what I am reading the board will sometimes not work with an overclock at higher voltage ratings. Put your CPU at v1.55 and that is fine as well if you haven't already done so. Although you do have a NC right? And it doesn't ever hang on my IDE drive detecting. It just sometimes shows the "Detecting Array".Quote:
Originally Posted by eva2000
'Quote:
Originally Posted by Klisp
Try set it to 166 instead of 200.
Maked some hundred megs in sandra ones i checked it.
But this depends on speed and other settings in bios i guess.
nah no probs with vdd at 1.7-1.8v for meQuote:
Originally Posted by ugp
check this out
@ 265mhz 3-3-2-8 at 2.8v with chipset = 1.6v
@ 270mhz 3-3-2-8 at 3.0v with chipset = 1.7v
@ 275mhz 3-3-2-8 at 3.1v with chipset = 1.7v
@ 280mhz 3-3-2-8 at 3.32v with chipset = 1.8v
@ 285mhz 3-3-2-8 at 3.43v with chipset = 1.8v
Holy crap look at this
AMD64 3400+ @ 9x 285 = 2565mhz at 1.525 + 10% vcore
DFI Lanparty UT NF3-250Gb 14/09/04 bios
1x 512MB OCZ PC3700EB @ 285mhz 3-3-2-8 1T at 3.43v via OCZ DDR Booster
120GB WD 1200JB
550W Antec TrueControl PSU
http://www.fileshosts.com/AMD/DFI/60...8_DS2/cpuz.jpg
Sandra 2004 PRO SP2b
Buffered = 4413 / 4412
Unbuffered = 2591 / 2659
Hexus Pifast = 47.94s
SuperPi
1M = 34s
2M = 1min 18s
Is there anyway i could improve on this so i could get a better benchmark scores? i'm scoring 30,155 in 3Dmark01, 74,000 in aquamark and 14,300 in 3Dmark03. Shouldn't i be getting more with these settings? The X800 is clocked at 594\579 stable. Here are some pics of the scores i'm getting:
Eva,
Can't you get that voltage without the booster and the Beta BIOS?
"Can't you get that voltage without the booster and the Beta BIOS?"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
the PS on the 3.3 line. i have mine @3.6 via the internal pot (Sparkle 400w PS, pot will not adjust it any higher), gives me around 3.44/3.45 vdimm max with the beta bios.
if you want more, then a 3.3 line vr is needed to boost it even further, that, or run with the OCZ ram booster. i am having problems when i try to use my OCZ ram booster, it will increase the vdimm to whatever i want, but then it will not boot, set the dial to the lowest setting, bootage.
go figure, gotta find out if using a different vdimm slot will make a difference with the booster operation.
baldy :D
Thnx Baldy,
Finally got an answer on this:D How does your LII do @ that voltage on this board?
I think several people have only had success with one dimm running and the booster. Have you tried that yet?
I wonder what would happen if you had 3.45 coming via BIOS/PS mod, then added the booster.........4.5v here we come;)
Quote:
Originally Posted by bldegle2
i think if you set the ocz booster over 3.6v it wont boot.
yeah i could but my 3.3v rail needs 0.24v above what vdimm is needed so 3.43v i need to set 3.3v rail to 3.67v.. anything more than 3.55v on 3.3v rail i'm uncomfortable with heheQuote:
Originally Posted by G H Z
I got my board last night. It is working like a charm and I have been able to get better overclocks all-round. I then flashed my bios with the new 9/12 beta. It is still 100% stable, but now my temps are way off. Any idea why? You are looking at a 10 degree difference between the stock bios and the beta bios. :(
Yes, the temperature is offset. Because some CPUs are reported with unexpected high temperature, most probably, Newcastle core. And when the temperature is detected to be too high, the performance will drop accordingly, I think it is CPU throttling. In the first BIOS (27/8/2004), if you disable the CPU throttling, the system will not boot, but it is fixed by the 912/914 BIOS already. So the BETA BIOS offsets the temperature to prevent this from happening. :DQuote:
Originally Posted by AllBrain
Thanks for the info TinTin. That is all and well, but sometimes my cpu temp will jump under load, to what I would expect. This makes reading your temp very difficult. The result is me not being able to use over 1.8 volts on my cpu. I never know when the temp is to high. Will there be a fix for this sometime in the future?
The temperature jumps drammatically under loads, I have a 3400+ NC too. It is difficult to monitor the temperature right now. With a clawhammer, it is now reported as 33deg.C, watercooled, room temperature 30deg.C. I also want a FIX for this issue instead of just a offset. DFI has known this issue already, hoping that the coming official BIOS will fix it. :)Quote:
Originally Posted by AllBrain
hi
first only my english is not very good :(
i have became my board yesterday and i testing a lot but in superpi 1M i have very bad results ... for 10x260 2.5-2-2-6 and 1T i have only 35sec.
I think i must have more or its this ok?
greetz
http://mitglied.lycos.de/siedl/10x260.jpg
Hi Mrki,
welcome to another harwareluxx member :)
Mine is way off too - 3200 Clawhammer, all sys temps are around 30, CPU is now reported as 24-26 aircooled :rolleyes: There is even no noticeable increase in case I run it with stock voltage or at 1.8v...Quote:
Originally Posted by TinTin
Btw, why would the temps be lowered by the beta bios to avoid thermal throttling if you can now disable it completely and boot anyway ???? Makes no sense to me...
@Mrki
i agree your 1M scores look a tad bit low? i would of expected a beter score at 2600mhz 260HTT 1:1 then what your getting. im sure there are a few people in here that can tell you how to make the score get beter. other then that man "wow" thats a nice oc. you do that on air or you using xtreme cooling?
peace perc,
Has anyone killed theirs yet? Because mine appears dead.
Look here
Got mine on Friday. Put in in Mach2 last night. On first boot BIOS report temp as -7'C, but Smartguardian as 243'C :rolleyes: With first overclock my CPU is sitting at 240x11 (1.6 vcore) OCZ EB @ 240 MHz 3-3-2-10 1T 2.8V (2x512 MB) ... so it's a good start. I am loving this mobo :D
only air cooling :)Quote:
Originally Posted by Perc
My memory run 1:1 ... You seen this on the screen i posted ...
Now i will test lower timings for mor mhz!
heyas chicken :D
I think people need to be very careful with high vdimm on these boards.
[edit]It wasnt a resistor, it was a burnt-out trace. I just hope it hasnt killed the CPU - either way ive got another board arriving Thursday.
the board is a :banana::banana::banana::banana::banana: but if u get her sucking its a awsome :banana::banana::banana::banana: ;)
first when i got it....yesterday i thought i got a DOA because i installed my waco and plug all power cables in it says only "check ur vid card because power cable is unplugged?" so what the hell i thought tried the other cable (msiRX9800) for floppy the same then cmos clear the same.. but i started lol with jumpers on 2-3 and blackscreen....so i tried some more (change the cable) and what the :banana::banana::banana::banana:? it booted ;)
since i use the bios came with the board and i m very happy but i got some issues bout memory (dividers) HT frequencies and throttling of course...
but i dunno how it does this but its a OC champion really i needed 1,7-1,78Vcore for 2330-2370 max and it was instabile on my :banana::banana::banana::banana:-ty epox and here i go with 1,66-1,71 2350 rOckstable wOW but not enough the 2400 i ve broken stable i wont believe on 1,76-1,82 i can do without probs ran prime fpr 7h40min without errors on epox 2415 was most ever i could bench!
lets see how far i ll come.... :D
today mornin i want to check it out some more core but it crashed and then i setted bios settings diffrent and never come into win again not with default sett. anymoa? ahh the :banana::banana::banana::banana::banana: again....
(hangs up in blinking one little straight line after chosed winXP screen like dos blinking hard to explain....)
then i went away when i came again 3 1/2 hours i unplugged the power ATX cable and 12V cable and the :banana::banana::banana::banana::banana: is sucking again very well ;) so give it a try again... :)
but i only got 1 ide hdd so i cant allow to get the :banana::banana::banana::banana::banana:ed swallow my hdd !
seEn andL
edit: i like bananas
I must have this mainboard!!
Absolutly the worst post i ever seen!
MY EYES ARE BLEEDING!!
My 3700+ is benchmarkable at 2.875 GHz with 1.7 Vore in Mach2 :p: I really like this motherboard. Scored 30631 3DMarks with WinXP & DX 9.0C :eek: and X800XT at stock speeds :banana4:
Here is some screenshots of my system doing 250 HTT one to one:
Super_PI
http://img.photobucket.com/albums/v3...I/Super_PI.jpg
Memory Bandwidth
http://img.photobucket.com/albums/v3...yBandwidth.jpg
CPU Arithmetic
http://img.photobucket.com/albums/v3...Arithmetic.jpg
CPU Multi-Media
http://img.photobucket.com/albums/v3...ulti-Media.jpg
whoa i got pretty sucking bh-6 will not make 2,5-3-3-10 for 235 / 3,2Vdimm
soOn i m going to get bh-5 corsair hope there ll i get moa!
seen andL
EDIT: hey guys also got problems with MODDED bios with default i can go up to the boards limit but when i set above migic 270+ the board wont boot => dete. array
but with the default i can boot with 400x5/6
why is it so? maybe a tweak in the bios? one value but i setted it same as the default one but it wont boot....
maybe i ll go to the old back again :) oldschool rOckZ
boards are in stock over at newegg if anybody cares :) http://www.newegg.com/app/viewProduc...136-147&depa=0
If allbrain can get 3800+ at 250-3-3-3-x, I gotta see what I can get w/ 265-275+ at 2-3-3-8 :D :slobber:
(TCCD still burning in on wife's puter whilst I fiddle w/ BH-5.)
I'm seeing this disconnect between memtest BW on TCCD and winders (gets less than my BH5 @ 250 until I get into the 270-280 range) but still see some BANDWIDTH here :shrug:
I can't wait for my OCZ Platinum Rev 2 512x2 comes in. I ordered it last night and it will be here sometime next week. And next week I am on vacation so I got sometime to play with it. I can't wait to see what this RAM does on this board. I have heard of one stick doing 310FSB; and 278FSB with two sticks in. But when I get it I will do my testing and post my results. I also hope to get alot higher CPU clocks as well. I hope to atleast hit 2.6GHz stable on air.
i just started testing 1x 512MB OCZ PC3700 Gold rev3 on this DFI board easy 275mhz 2.5-3-3-8 at 2.8v vdimm with chipset voltage at 1.6v :)Quote:
Originally Posted by mad mikee
Why i can geht with Jess's and Oscar's BIOS 14/9 only 3.15-3.2 VDimm and not 3.3? My PSU can take 3.3 i think or not?
Have someone and guide for psu rail mod?
Thats awesome! Have you got another stick of 512 to try? I'm planning on getting this memory but will want a gig RAM for 24/7 useQuote:
Originally Posted by eva2000
Your 3,3V Rail has to be 0,1-0,15V higher than your Vdimm, allways.Quote:
Originally Posted by Mrki
Also VID control has to be set at anything but auto.
anyone test fsb useing ALL 3 dimms?
this mb simply kicks arse. this oc here seems to be pretty stable? my 3.3v rail is at about 3.38v so getting 3.2v to feed my power hungery bh-5 is cutting it close. i deff need to do the 3.3v mod to my psu. heres a screen shot of my oc so far. hope to get more once i work out a few bugs.
*edit* where is the 1T setting in the bios for this mb? im using the 9/17 modded bios for 4v v-dimm....
peace.....
@Perc what RAM is that there? You should be able to push that alot more though too :D
Quote:
Originally Posted by ugp
crosair 3200XMS series. i gues its some older stuff cause its bh-5. anyways i just got the mb yesterday so im still clueless on what i can get out of this thing. im going to have to re-read this big ass thread to look for tips and tricks. im still looking for the damm 1T setting....
peace....
The board is very easy to get along with? What version BIOS are you running it with right now? Did you get the v4.0 modded one? That seems to be what everyone is running and no one is having problems with it yet. Just play with it and have fun. Let us know what your highest CPU clock is.Quote:
Originally Posted by Perc
Quote:
Originally Posted by ugp
yes im using the 4v modded bios as well. now i got a few questions here. how do you get 1T? i seen in a post a few pages back that 1T= CPC enabled? what about CPC auto is that 1T? also i cant boot at any speed using CPC enabled??? im using two sticks of double sided crosair xms bh-5. i think they are rev1.1 not too sure they are the first pair of crosair ive ever owned. also i did have problems running these two stick in dimms 1,2. i had to use one stick to get it to boot and later got the two stick to work in dimms 2,3 .. maybe ill try one stick and see if i can enable 1T that is unless auto will give me 1T??
thx perc.
I would just stay with 1T timings. I am not sure though...can someone else help him with that question?
Quote:
Originally Posted by Perc
If you notice when it boots Perc if you turn off the flash screen, it's already set @ 1t, unless your trying to turn off the 1t to 2t??
no im trying to make sure it is on 1T thats all. so your saying that with cpc set to auto its already 1T? what screen do i shut off that dfi flash screen when you boot? will it say 1T in the flash screen anywhere if i disable the dfi flash screen?
thx perc,
ok i just disabled the dfi falsh screen and i can now see what your talking about. i am indeed getting the 2T with the CPC set to auto so im loosing memory bandwith big time. im going to try takin one stick out and seeing if i can boot with 1T? as it stands now i can't even boot at defualt speeds using 1T let alone trying to use 1T with any kind of oc...
*edit*
ok i pulled one stick out and im able to boot with CPC enabled (YAY :D ) i gues the way to go with this system since its single channel would be one stick of 512 instead of 2x256. hey how are you guys getting along with the EB memory in this mb? what do you guys think would be better EB with looser timmings or BH-5 with the tigher timmings? i see that alot of you guys are using EB in this mb so i got me a pair of 256 3500 eb comming to try in this mb. i hope they work beter then my adata pc4000 and my bh-5 3200....
oh and whats drive strenth do?
peace perc,
Using My Crucial Ballistix, mine set's to 1t, im testing out now for max fsb, cas 2-2-2 drops out on the ballistix @ 240, then i have to go to 2.5-2-2, past 265 i have to run slack timings like PC4200, this is with 2.5-4-4-8 timings. 285 fsb 1:1, but the 1t is still on.
I've got Good corsair, Geil, OCZ, everything, Everyone do their selves a favor and buy the Ballistix, This is the first "all around memory" i've dreamt about, This stuff is PC3200 2-2-2 if you need it, or just change the timings and you have PC4200+ this is my first stab @ High FSB with slack timing on it. I'll be back on a reboot with more results. Oh and by the way. this is @ 3v!!
Anandtec's review is dead on if your read the Ballistix review. I've been using it for the last month in everyone's computer that i build for highend. And it's cheaper than Corsair's big boys, And it's all i'll buy now.
Mine DFI does fine with my bh5's using 256mb sticks, but it doesnt like my ADATA PC4000 at all.
I found some screenies of the chip you have now the 3000 newcastle that your using . in my pictures folder Perc, this is with using Geil PC4200's i've had for about a year. Back then no one liked Geil, and no matter how many 300FSB+ screens i showed of it. The corsair fanboys still told me it sucks and they would only buy corsair??
Still going 290 HTT 1:1 I'll be listing in the for sale forums soon various BH-5 sticks by Kingston and Corsair, And also some PC4200 sticks from OCZ, Geil. And some Adata PC4000. I've found my ram. I also got a Ballistix Tshirt the 5 times i ordered. Im not a fan boy on 2 many things. One is Fortron Power supplies the other is this ballistix memory.
I dropped down to 8x multi since im only benching memory speed now. And im on Air cooling, Alpha I bought a Vapo LS and im hoping it will show up here tomorrow!!!
290HTT 1:1
Perc, try DIMMs 1 & 3. ;) I'm still looking for info on drive strength, and a lot of the advanced mem timings. Kinda hard to find, and the BH-5 specs aren't real helpful, they're just too old. :( Remember, BH-5 was out when JEDEC still didn't endorse PC3200 yet, lol. ;) @ Tedinde, that looks like the stuff. Next time I can afford some RAM, I'll give that a try. :cool:Quote:
Originally Posted by Perc
what does unbuffered look like ?Quote:
Originally Posted by Tedinde
yeah it's part of dual channel OCZ PC3700 Gold rev3 kit so will try the other stick later on :)Quote:
Originally Posted by ColdFusion
Thanks eva for the 7X bypass tip.
It gave a good boost!
@ted
how the hell you getting 190 1:1!!!? what memory u using? im stuck at 255-260 1:1 with this bh-5 and 3.2v vdimm. also whats the max v-core you think these 64 chips can take? ive yet to use anything above 1.66v...
peace perc,
I already own 2x512 PC4000 ADATA
Would you recomend me selling them and buying a pair of "OCZ EB DDR PC-3500 / 433MHz / Platinum Edition / Dual Channel"???
I know they are better but don't know if they are better enough to send mines and spend around $150 more on them. Will I get MUCH more bandwidth :confused:
I will use 2x512 config, never 1x512
Currently I get around 3700Mb/s (Sandra Buffered) at 250 1:1 2.5 4-4-10
@Tedinde...
Put your Tras and 10 instead of 8 and I bet you will get alittle higher bandwidth scores. 64s like a Tras setting of 10. Is your CPU at 2.8 on air? And if so what are the temps and how much voltage are you having to run to it to hit that?
@Bourch...
I would recommend getting some OCZ Plat Rev 2 512x2. If you want to overclock 1GB this is the RAM to get. It will do DDR577+ with two DIMMs in. OCZ EB wont even do that or any other memory that I am aware of. But I think also Ubermann told me that he has gotten his one stick to do 310FSB so far as well.
@Ubermann...
Is 310FSB the highest on your RAM still?
310 is the best yet that survived this stupid prime for an hour.
I can boot comp, run Super PI and run all kinda benches without crash or other strange lockups.
But it can fail after 5 seconds in prime.
Will try memtest instead.
Heres my Board with a 3400+ Clawhammer CG and 1 gig KHx BH5@3,1V
LDT=Auto (2,5)
But 34 sec isn´t enough , i think. ive seen some screens with 250x10, which shows 34 sec too.
The maximum of this Board , i still have to find out.
Therefore, see you
http://mitglied.lycos.de/freestylercs/hpbimg/34sec.JPG
good luck free
Well come to find out my new RAM is going to be here today. So tonight I shall be posting lots of new screens and hopefully I shall have a rock solid stable system.
I need to know where is Vcore/Vdimm read points... anyone konws?
cumps!
I just found now vdimm read point :toast:
and vcore? anywone?
I think i'm doing pretty good super pi ... these are my ram settings and stuff.
i think 31sec is good.
Better have real ssstttttteaeaeaeaeaaadydyddydydyddyyyyy Hand or :frag: :flame: :explode:
(/me considers trying after lots of tape on tip of DMM :D )
vdimm?Quote:
Originally Posted by Klisp
update ... not bad for NC and low performance dfi :cool:
http://mitglied.lycos.de/siedl/10x260_34sek.jpg
LOL, that's a small target. ;) Maybe if we taped over all but that center leg? :)Quote:
Originally Posted by mad mikee
My Best Pi with OCZ Powerstream 3.33v@3.8v
http://clientes.netvisao.pt/npa1987/ximabestpi.jpg
My Sapphire9800Pro ALL Air Cooled adn Without Vmods :)
http://service.futuremark.com/compare?2k1=8151763
It looks like superpi depands more on the cpu frekvens, and sync isn't a must!
hi there guys, & excuse my 'traditional' question :p:
i'm thinking about upgrading my XP-M2600+ & NF7-S rev2.0 to an A64 system. now, it seems that im going this DFI MoBo, but the question would be, which CPU to go?! i can't decide which?!
1. A64 3200+ DTR?!
2. A64 3400+ DTR?!
3. a non-DTR one?! CH or NC?!
BTW, i'll be using my Corsair 2 x CMX256A PC3200LL re1.1 ( BH-5 :D )
NaeLQ
I have 100mhz lower then him and higher timings, but get 34sec also =)Quote:
Originally Posted by trey
Got My Ocz!!! Yay!
Quote:
Originally Posted by ugp
yeah what you get? i just picked up some eb3500 myself but now i hear that the balistic memory is what you want these days? well i cant aford to buy any right now so these new ocz eb3500 beter be worth the trouble...
@naelq
im using some crosair CMX256A 3200LLPT XMS rev1.1 bh-5 and so far 255-260 1:1 with 2-2-2 timmings 3.2v on this dfi board. you should see some decent 1:1 ocs out of them. good luck :toast:
perc,
OCZ 512x2 Plat Rev 2 PC3200
well not the greatest oc compared to you guys but none the less 2650mhz 1:1 using pc4000 adata. IF i can mange 2700mhz 1:1 i would be happy with that. anyways have a peek tell me what you guys think? also i tried that 400x5 with the 1/2 divider and it was a no go. i got this message saying "detecting array" then it would just reboot and then a blk screen so i dont know how the hell you guys are getting 400plus HTT??
peace perc,
I´ve been reading this thread almost from the beginning and drooling :slobber: when others got their boards. But finally yesterday I got mine.. :D and decided to post...
I flashed the 4.0V mod bios. Now I´ve just been trying to find the max stable HTT and so far I´ve found 350MHz..
I ran prime 7 hours with that and no problems...
Now I just have to find the max 1:1 with these EB´s... ;) :)
7x350MHz PRIME 7h
dammit man 350HTT? what multi you using with that? i tried 5x400 and all i got was a blk screen and a message sayin "detecting array" :shrug:Quote:
Originally Posted by jayl
I was using 7x multi (7x350MHz). I haven´t tried more or lower multis, yet ;)Quote:
Originally Posted by Perc
Oh yeah, all settings were set to AUTO, except I uppet the chipset voltage by +0.1V to 1.6V and also Vcore 110%.
thanks Perc, & what about the CPU?! which do you recommend?!
OCZ EL Platinum Edition PC3200 Dual Channel PackQuote:
Originally Posted by ugp
1024Mb 2x512 Kit
400 Mhz/PC3200 Rev.2 2-2-2-8
OCZ4001024ELDCPER2-K
Cons. 339,00 €
OCZ PC3200 DDR OCZ Platinum Limited WinBond BH6 1Gb Kit
1024Mb 2x512 Kit Limited Edition
400 Mhz/PC3200 2-2-2-7 (2-2-2-5)
PN-OCZ4001024ELDCPLE-K
Winbond BH6 Limited
48h - 362,00 €
I found these two 1024 packs. The first one is not in stock but I can wait.
Is the rev.2 better than the Platinum limited and the 3500EB? Them, does it deserve invest some money and change my pair of adata for those ones?