small improvement with memory on LN2.Quote:
Originally Posted by hiwa
BBSE did not seem to scale with voltage like I thought it would, oh well:rolleyes:
http://i.imgur.com/XqUud.png
Printable View
small improvement with memory on LN2.Quote:
Originally Posted by hiwa
BBSE did not seem to scale with voltage like I thought it would, oh well:rolleyes:
http://i.imgur.com/XqUud.png
U still have cw problem dude, look your available memory. Try 7_10 under ln2 ans 7 tcwl
ha I must have forgotten to set maxmem on that run, I was testing 600+Quote:
Originally Posted by hiwa
7_10 at TCWL 7 was not working constantly failing by sometimes by loop 4 sometimes loop 23 at full pot.
http://i.imgur.com/k1yac.jpg
there's a Triple Point pot hidden somewhere under there:D
http://i.imgur.com/9cf6c.jpg
I tried voltage from 1.87 to 2.0v but stopped there as I was not seeing scaling, I will give PSC a try this Tuesday when I refill.
What's the humidity in your area?! :shocked:
PS: Looks like your MAXMEM was set to 600MB for that run, but your available real memory is too low.
Humidity is pretty low, 35% in my house, but I have been benching for hours and hours on end, hence why so much frost.Quote:
Originally Posted by Don_Dan
I see. It looks pretty "cool" though... :D
Were you using ERAM for this run? And which CW size were you using? Instead of using ERAM you could try using two HDDs.
Eram was used for this run, OCX SpiTweaker (656mb, 32, no CDT just c > x while ramdrive is on Z and spi resides here and is launched an ran from there.Quote:
Originally Posted by Don_Dan
nice improvement man, time to put pitweaker to rest. I get better results just single copy paste of 1.8GB file, give it a shot man. Keep pushing
Ssd make a diffrence regarding wazza versus classic hdd ;)
Thanks Splave:)Quote:
Originally Posted by Splave
Manual waza is definitely on the top of the list as my waza is not very efficient.
I have everything ready minus the LN2 hopefully they are not closed today and I will be shooting for 17's if I can fill back up tonight. Not sure if I should give PSC a spin cold or keep trying with BBSE.
Regardless this thread is awesome sauce and I will keep pushing:D
hmm not given this one a try, just on a 600GB Raptor over here.Quote:
Originally Posted by Alex-Ro
Faster waza? Is that all? Or overall actual faster time?
No,you can get a faster wazza with classic hdd,ssd is not the best for wazza.
Finaly today i run mems on ln2. cpu is on air.
you have to spent quite along time for test in order to get a decent run.
i have to improve it next time.
http://img708.imageshack.us/img708/2290/capture4ju.jpg
Uploaded with ImageShack.us
Quote:
Originally Posted by Splave
ASROCK OC Formula sets 49x102.1 as 5001.54
maximus v formula sets 49x102.1 as 5004.29:confused::mad:
http://img35.imageshack.us/img35/5039/capture7dh.jpg
Uploaded with ImageShack.us
Amazing work with the 2800 CL11's & Cold Kintaro :up:
Kintaro i tried my good 2800 kit but best i did was 2666 c9 ss-20 with everything else tight, u got CRAZY hynix there they can do cl8 with those timings man.
I know dumo has some nice hynix to, hope he find time to try them under cold.
Got 296xx with PSC but i want fight with hynix and sammy lately.
Is that Hynix for real?
they have to be real cold in order to scale otherwise no magic.Quote:
Originally Posted by hiwa
it is hard due to increased risk of damage at deep freeze.
worth to try.
Interesting how cold are we talking about?Quote:
Originally Posted by kintaro
Also are these CFR/BFR/MFR?
Hynix no have CB (AMD) but on IB a lot of times u get 55 code on boot when temp is lower than -100Quote:
Originally Posted by l0ud_sil3nc3
should be some CFR
at -80000 no hynix can do like kintaro did with his kit, his kit should be very very special, i rememeber we tried at computex some nice hynix but CL8 with tight timing were IMPOSSIBLE
His kit is BFR not CFR.Too bad we can't find those good BFR anymore :(
TridentX 2800 BFR? u sure?Quote:
Originally Posted by Alex-Ro
Kintaro care about sharing latest 5 digits on one of the ICs?
How important is the word waranty to you?Quote:
Originally Posted by hiwa
I pay for my hardware.
anyhow if you don't go down to -186 don't blame yours kit.
very important, don't open them if they are not sample.Quote:
Originally Posted by kintaro
Possibly the first batch
http://img22.imageshack.us/img22/548...enshot093o.png
Neweeg's first retail batch (only 2X4GB)
http://img846.imageshack.us/img846/1...enshot092k.png
So exactly after ripjawsz with bfr. Thx dumo
GUN'G'STAR 6.16.969, corsair 2666c10, cpu&mem on ln2
http://i.imgur.com/9lw24.jpg
^vdimm?
sick run as well:)
Savage power Gunstar :clap:
Awesome run .
crazy speeds. 2v+ im guessing.
vdimm just 1,965v )
Nice run gungstar
My Samsung action 6.18.735
TeamGroup 2800MHz 2x4 GB DDR3 11-14-14-31 TDX34096M2800HC11R-L
CPU - water, memory SS -10C, 1.9V
http://i.piccy.info/i7/a234ee03084d2...18_735_800.jpghttp://i.piccy.info/a3/2012-12-03-16...00x500-r/i.gif
http://i.piccy.info/i7/bae0cbe5a7bdf...917/ss_800.jpghttp://i.piccy.info/a3/2012-12-03-16...55x566-r/i.gif
6.18.750
I did promised you to show 2860 CAS 9 on air,did i not? 1.90 V,cold air(5 degrees?) For the record i did boot at 2900 CAS 9 and run 1M,32M crashed at loop 3 =)) 2666 C10 baby :D My wazza sucks :rolleyes:
http://img138.imageshack.us/img138/3641/2try.jpg
Killer ram clocks Alex, especially at Cas 9. Dominator Platinums?
Yeap,corsair platinums.
Alex-Ro nice RAM. Should be about 6.18.2xx or lower
I know,but it's very hard to hit the wazza on ssd,the optimum moment to start is hit or miss because sometimes memory grows till 5 seconds,sometimes 3 sometimes 8,classic hard-drive should do the job ...
Very nice memories there, nice too see sams at those speed and timings on air.
After testing and binning very much memory and the spontaneous idea at stummerwinter's home to try trcd 9 with PSC chips, i got addicted again with some new ideas and evenings with testing..
http://www.abload.de/img/5ghz_6_17_172_32m_smaj2jlu.jpg
http://www.abload.de/img/img_1071wkrac.jpg
I also realized that my patience rised again with some whine.
http://www.abload.de/img/img_1072chqfl.jpg
After about 6hrs the board was a bit wet. This did not result in the common '55' error, but a toasted gpu :rofl:
my faithful hd3450...
http://www.abload.de/img/img_1074vgr9u.jpg
at the next day i knew what should be possible and hoped that nothing else would die. Indeed it went smooth, even Start and Reset buttons were waste for a long time
http://www.abload.de/img/img_1073atqpp.jpg
Hm, would have been too nice...
http://www.abload.de/img/img_1075k6qtt.jpg
But now, "no saying, but showing" :D
6:16:469
http://www.abload.de/img/5ghz_6_16_469_32m_smarnzwt.jpg
Crazy score Angoholic! :shocked:
Which kit(s) are you using for this run?
Crazy 8gb result, i assume twcl 6
he use 4x2GB G.Skill Trident PSC
very nice score
keep pushing :)
thx :)
:yepp: hiwa..
Awesome score Boris
nice pics and great score angoholic
Hello guys,
finally did some testing with my new board and memory kit (Corsair 2666cl10). This is w/o waza ofc, but seems to be a bit too slow. I laredy set all subs tight I think. I should be sub 6.21.xxx I guess...
(sorry for the crappy quality of the screen, I took it with the iPad :p)
Any tips? :D
http://img685.imageshack.us/img685/305/ipjpg.jpg
Thanks to everyone who will try to help me :)
Thanks!
Alex
Should be under 20,don't know,maybe E0 es scores worse?
Sub 20 without waza???Quote:
Originally Posted by Alex-Ro
Oh,did not see,guess it's in normal range then :)
hmm, so PSC still better??? :(
No,an air very good psc comes close to very good samsungs,but the thing is psc scales with cold and you can get awesome results.However nowdays you can't find any good bbse or psc in retail,so good samsung are the only choice....
Your score is not too bad, 6min22.1 without cw translates into ~6min19.0 with CW, which is about on par with other Samsung scores in this thread. Note that all the top Samsung times are done in 4x4Gb configs, which is said to be at least 1 second faster.
If you're on air, then it's a lot easier to get a good time (sub 6min20) with Samsungs than PSC. You don't need to have super duper PSC kits to do 1300+ CL6 / CL7-tWCL7 on LN2, properly tweaked average stuff should be able to do it too.
BTW, you can no longer find good Samsungs in retail as well ;)
Here's something I've been working on last week. Also no CW and timings not minimised as the board started acting funny after this run.
http://www.abload.de/img/1360c6_192v_32m_ln2l2um6.png
That trrsr is huge,setting it 5 will shave 1 sec+....But very good trcd
Thanks a lot Sam! I just planned to try with 4 sticks, I have them. I hope that my CPU can kkep them 4x4 at 1380+ MHz .Quote:
Originally Posted by TaPaKaH
About my score, I thought that it was slower than seems to be. Will try to improve it a little bit trying more OSes too.
SOmebody noticed that on Asrock Z77 OC Formula (or other Z77 too) the 2800 divider is slower than 2666/2600?
Thanks for the help!
Whats ur aida delex ?
Hmm, will check in next days, but if i'm right 27.5/27.7 gb/s. Will post a screen. With 2800 divider i can pass 28gb/s but pi32 is slower atleast 0.5second.Quote:
Originally Posted by hiwa
Alex
TaPaKaH your result with PSC or BBSE?
this are my 24/7 settings i think its a nice SPI32 for it :) using 2x4GB TridentX 2666CL10
http://i.imgur.com/9YFVj.jpg
http://i.imgur.com/dYwXv.jpg
u may notice that vcore is high for 5GHz thats cause im using OFFSET and EXTREME LLC as games love it, if i dont use it games crash
^^Andre^^ it is nice that you are keeping these thread alive with your gSkills 2666 results. I will try to match what you have done if possible with my 2666 CL10. :up:
thanks mate i can do much better but i dont want to ruin my 24/7 i tweaked test like 10 times till all was rock solidQuote:
Originally Posted by runmc
if i can help let me know, my Gskills Tx samsungs love volts and that is with LB=6
cheers !!!
Sergio
Cool, give them 1.75v and LB 1 :p
Nice 24/7 settings btw xD
I got 12min with my G620 and psc lol
thanks mate :up:Quote:
Originally Posted by Ivanlabrie
Here we go!
ASRock Z77 Oc Formula
Corsair Dominator Platinum 2666C10
http://img211.imageshack.us/img211/3...aphsot0022.jpg
SHould be faster with 16 GB? I think that it's still a bit slow
Yea,if you run 16GB you will gain at least 1 second :) compared to 8 gb,so you still have some time to catch...
I gain only about 0.5 switching from 8 to 16 gb...don't know where i'm doing wrong! Tried 4 OS too...
Don't know mate,my best run at 2800 9-12-12 was 18.250,at 2860 i had the same but on a different os and not a good run...
Delex, have you tested tCWL 7? I find 7 is generally quicker unless pushing extra volts then 6 sometimes surprises me... also 6 may be the reason 2800 is slower for you.
I think I remember Splave mentioning he found some OCF dividers faster than others in the 3D01 low clock thread.
That is right 100:133 strap is better at efficiency in 2001, i did not find it better in spi though....
Hey sam, I found tWCL 6 and Cas 7 faster then tWCL 8 and Cas 6 and thoughts on that?Quote:
Originally Posted by TaPaKaH
Allen imo the fastest ever config on Ivy is Cas7 twcl 6
I can't get tWCL6 to work at 1300+MHz with any CAS on my PSC (LN2) so I run whatever I can :)
Here is mine:
http://img856.imageshack.us/img856/9504/spi32mlcc.jpg
Needs improvements though :)
Question: Is it efficient based on the timmings I used?
Noticed that I lost 8 gb in this run. My IMC didn't keep it. So this is a 8 Gb run, i got the same score with 2 sticks instead 4 LOLQuote:
Originally Posted by Delex
some nice new scores here, hopefully this thread will stay alive in 2013, too. :cool:
16 GB run, but need to optimize my waza. 0.4-0.5s better would be possible so I'm shooting for 6.17.xxx
EDIT: Forgot CPUZ mem tab - the memory clock is 1388 MHz
ASRock Z77 OC Formula
16 Gb Corsair DOminator Platinum 2666C10 @ 1.85V - air cooled
Intel i7 3770K @ aircooled - 1.25V
http://img541.imageshack.us/img541/3465/618390.jpg
:)
Alex
improved a bit with waza....but 3 seconds of boost seems to be impossible here :(
http://imageshack.us/a/img689/6537/618235.jpg
Guys, I tried all combination form 600 to 700 Mb of maxmem and form 1.4 to 3.6 Gb waza- single file and 1 mb each file...in the best cases i cut 2.4 or 2.5 seconds. Any tips?????
Thanks in advance!
Alex
Just realized i haven't uploaded an old score from October .
Ram was a pair of GTX3 . Again cascade cooled (-110C) . No matter what , it couldn't bench at 1300Mhz . I'll have to find some time to test my other kits ...
Anyway ...
Stelios - 6:18:109 - 47x106.4 - 1276MHz - 7-9-7-28-78-1 - Asus Maximus V Formula - Corsair GTX3 2X2GB PSC - 1.9v if im correct -CPU air - RAM cascade cooled
http://www.hwbox.gr/images/imagehost...9ef466f7a9.jpg
Picture shows 6:18:109 mate :clap:Quote:
Originally Posted by Stelios
6:18:953 was my previous uploaded score and i just copy-pasted the line , but forgot to change the time ... Now it's fixed :DQuote:
Originally Posted by C-N
Keep trying guys some nice scores here.
Stelios why trcd at 9 ? U dont need that go 11 to have much stable setup but play with others.
I had trouble to run 1300Mhz and I don't know if it's the IMC the was keeping me low. There was no benefit to run 7-10-7 . It was very slow .Quote:
Originally Posted by hiwa
I'm tempted to try again . I'll check some previous scores from other users and see if i can make it :D
Finally!! 7 binned memorykits, lot of time while testing, lot of fails.. did i forgot something? Well, here is my result with aircooled 4x2GB Trident BBSE's. :)
http://www.sf3d.fi/forum/download/file.php?id=212
Here binned mems:
1x Corsair XMS3 7-8-7-20 1600 (CMX4GX3M2A1600C7) (PSC)
1x Corsair Dominator GT 8-9-8-24 2000 (CMT4GX32A2000C8) (PSC)
2x G.Skill Ripjaws X 6-8-6-24 1600 (F3-12800CL6D-4GBXH) (PSC)
1x G.Skill Ripjaws 7-8-7-24 1600 (F3-12800CL7D-4GBRM) (PSC)
2x G.Skill Trident 9-9-9-27 2000 (F3-16000CL9-4GBTDD) (PSC)
1x G.Skill Trident 9-9-9-24 2000 (F3-16000CL9-6GBTD) (BBSE)
1x G.Skill Trident 9-9-9-27 2133 (F3-17066CL9-4GBTDS) (BBSE)
http://www.sf3d.fi/forum/download/file.php?id=213
Good man!! Which score u have with no waza??
Did not test with those settings, but when i compared 2x2GB vs 4x2GB with little more relaxed timings it was about 2 second's slower without waza (if i remember right).Quote:
Originally Posted by Delex
Edit: Testing now... failed at round 13 but it was already 1.7s slower than with Waza.
Source of my memory :DQuote:
Originally Posted by Asmola
Good, that you finally got in to your goal!
Gettin' there..
Dumo - 6:20:454 - 49x102 - 1428MHz - 10-13-12-28-107-1T - MVE - Corsair 2800C11 - 1.83v - air
http://img690.imageshack.us/img690/5778/zzzcorsair1.png
Uploaded with ImageShack.us
@Dumo no waza? your time i think must be sub 6:20
my result with corsair 2133c11 vengeance ver5.12, 2,05v air, played before AOOC2012
http://i.imgur.com/QP8DT.png
Hi all,my first time on the 5 Ghz efficiency.I stuffed wazza up on this run and had a few efficiently problems, didn't get time to run again,will run again later.
Bullant - 6:17:969 - 49x102 - 1326MHz - 7-10-7-26-90-1T - Gigabtye UP5 - G Skill 2000C6 - 2.15v - LN2-CPU -30 Single Stage
[http://s7.postimage.org/ikb95slrv/bbbbbb.png
^awesome run man, don't think your efficiency is off, just need to tighten some secondaries and tertiaries and you should be set!
nice one :cool:
Also try to use 100:133 dividers ;) Trrsr at 4 if possible,and tighten up those secondaries,trrd 4,trfc 70,twr 8-10,trtp 4-5,tfaw 16-20,twtr 4-5,you will get a nice boost.I know you guys have problems on gigabyte mobo's,so maybe try asus,asrock oc formula plays very nice with psc ;)
Thanks Alex,just did a quick try with those settings and they really good,I was having a problem when i tighten things up too tight i was loosing efficiency but it seem it may have been to much V core,dropped V core back abit and seems ok now.Thanks for the kind words and help guys and the nice settings AlexQuote:
Originally Posted by Alex-Ro
When i work out how to thank you alex i will ahah
No problem mate ;)
Little improvement Bullant - 6:17:594 - 49x102 - 1326MHz - 7-11-7-26-90-1T http://s1.postimage.org/cxvrusghb/00...0000000000.png
l0ud_sil3nc3 - 6:18:703 - 108.7x46 - 1303.5MHz - 7-11-7-28-98-1 - Asrock Z77 OC Formula - G.Skill RipjawsZ 2400c8/PSC - 1.94v - cpu LN2 / memory LN2
http://i.imgur.com/YHHQy.png
not sure why so weak for 4X2GB?
http://i.imgur.com/Gyc6p.jpg
[QUOTE=l0ud_sil3nc3;5164406]l0ud_sil3nc3 - 6:18:703 - 108.7x46 - 1303.5MHz - 7-11-7-28-98-1 - Asrock Z77 OC Formula - G.Skill RipjawsZ 2400c8/PSC - 1.94v - cpu LN2 / memory LN2
http://i.imgur.com/YHHQy.png
not sure why so weak for 4X2GB?
http://i.imgur.com/Gyc6p.jpg[/QUOTE
How much boost did u have between 2 and 4 sticks?