Core i7/X58 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

03-21-2009, 09:56 PM
2slick4u

http://i458.photobucket.com/albums/q...4-u/stable.jpg
03-21-2009, 10:12 PM
Chicken Patty

^^^^ so looks like dropping your mem divider did the trick heh :D :up:
03-21-2009, 10:14 PM
Chicken Patty

Quote:

Originally Posted by scyzer

Thought I might repost my question in this thread as well. (Original Post: http://www.xtremesystems.org/forums/...postcount=2489)

Using a GB EX-58UD5, F5 Bios.

I can't get my 920 to 3.8GHz stable.

I can do 180 fine at:

20x Multi
Vcore 1.3000
QPP/VTT 1.3000
Turbo/HT/All Power Saving Functions OFF
Load Line Calibration Enabled
VDIMM 1.64
PLL 1.80
Memory Multi 8x, Uncore 16x

Memory is a G.SKill PI kit rated at 8-8-8-21 @ 1.6-1.65V

Tried upping volts, using different multipliers (CPU down to 19x, Uncore up to 18x), I SEEM to have 3.7GHz stable with just Vcore upped to 1.4000V (45min of Prime95 so far).

Thoughts?

for 2slick, dropping the mem divider did the trick for him to be stable. Give it a shot and see if you can go higher.
03-21-2009, 10:18 PM
2slick4u

Quote:

Originally Posted by Chicken Patty

^^^^ so looks like dropping your mem divider did the trick heh :D :up:

is 10hrs enough to know its stable?
03-21-2009, 10:21 PM
Chicken Patty

Quote:

Originally Posted by 2slick4u

is 10hrs enough to know its stable?

everybody has a different opinion. I dont even do stress testing. I just use the computer if it crashed I tweak it until it doesnt crash. 10hrs is a good measure though.
03-21-2009, 10:28 PM
2slick4u

yeah just running linix for 10 run 25000 size than im good lol
03-21-2009, 10:29 PM
scyzer

Quote:

Originally Posted by Chicken Patty

for 2slick, dropping the mem divider did the trick for him to be stable. Give it a shot and see if you can go higher.

Cheers.

Will do after another 6.5 hours of priming. If this works I'm saving the profile first.
03-21-2009, 10:31 PM
2slick4u

how u save the profile?
03-21-2009, 10:31 PM
Chicken Patty

Quote:

Originally Posted by scyzer

Cheers.

Will do after another 6.5 hours of priming. If this works I'm saving the profile first.

gotcha. Let us know how it goes.
03-21-2009, 10:32 PM
YukonTrooper

Quote:

Originally Posted by 2slick4u

is 10hrs enough to know its stable?

I stress mine for 48hrs; but I crunch, so I need to know it's rock solid.
03-21-2009, 10:33 PM
2slick4u

oh i see yeah hope this is solid :P
03-21-2009, 10:35 PM
scyzer

Quote:

Originally Posted by 2slick4u

how u save the profile?

In CMOS, you can save your profile to the BIOS.
03-21-2009, 10:36 PM
2slick4u

oh okiay thanks :)
i willl do that
right now its stable which im happy at 3.8ghz :P
03-21-2009, 11:01 PM
YukonTrooper

Quote:

Originally Posted by 2slick4u

oh okiay thanks :)
i willl do that
right now its stable which im happy at 3.8ghz :P

That's actually the sweet spot for almost all chips when it comes to a voltage/heat/performance ratio.
03-21-2009, 11:07 PM
2slick4u

really.
so my setting is good?
03-21-2009, 11:11 PM
Classic Satch

Quote:

Originally Posted by YukonTrooper

That's actually the sweet spot for almost all chips when it comes to a voltage/heat/performance ratio.

Great sig! Of course, the only thing wrong is that you don't have Sid the Kid working his magic. (I'm born/raised in Pittsburgh). :)
03-22-2009, 12:02 AM
2slick4u

can i do a 6-6-6-18 timing with a 6x multiplier?
03-22-2009, 01:05 AM
2slick4u

http://i458.photobucket.com/albums/q...4-u/dfsdfd.jpg

I'm happy with the result, but a little worry about the temps at idle..44 degrees :S at around 70 something degree on load..
03-22-2009, 04:15 AM
scyzer

I'm 8+ hrs stable stressing using Prime 95. Will do a 1hr OCCT Linpack now, just to be doubly sure.

EDIT:

ARGH! I don't believe it... 40+ minutes into Linpack, whilst screen saver was on, Windows sorta froze. It SEEMED like it frozen, then from random keyboard bashing, it looked like it was going to return to desktop (start bar became visible) and then just hung. Not sure if it was a stability issue or just windows =.="...

EDIT2:

Okay... I tried 6x memory, 12x/13x uncore and still not getting anywhere with bclk.

Vcore was 1.4000
QPP/VTT was 1.3400
PLL was 1.88
VDIMM was 1.64

Need more help...
03-22-2009, 05:19 AM
ewitte

Quote:

Originally Posted by Chicken Patty

what does your water cooling consist of? with HT on at 1.329v 4 Ghz I dont go over 70ºc an any core :confused:

Getting better :) I see room temps matter A LOT. One extra fan dropped me to about 75-77C. At night I have the AC set to 76F and here is what a small drop in room temperature got me (note it was mostly 72-73 on core1).

http://s150233688.onlinehome.us/firstwatertemps.jpg
03-22-2009, 06:19 AM
scyzer

I'm thinking of changing BIOS rev again... however, don't know which one would be best (I've used F5 and F6e on my GB EX58-UD5, so need something more stable). Maybe up Vcore above 1.4000 BIOS? Up QPP/VTT voltage as well? VDIMM is set at 1.64 in BIOS but drops to 1.616 on load.

I really dont wanna give up and admit I have a bad OC'er...
03-22-2009, 10:27 AM
Chicken Patty

Quote:

Originally Posted by 2slick4u

http://i458.photobucket.com/albums/q...4-u/dfsdfd.jpg

I'm happy with the result, but a little worry about the temps at idle..44 degrees :S at around 70 something degree on load..

your temps are fine, these things can run up to 100ºc. Just try to stay under 90ºc. Glad the settings worked out :)

Quote:

Originally Posted by ewitte

Getting better :) I see room temps matter A LOT. One extra fan dropped me to about 75-77C. At night I have the AC set to 76F and here is what a small drop in room temperature got me (note it was mostly 72-73 on core1).

http://s150233688.onlinehome.us/firstwatertemps.jpg

yes they do a lot. Also I switched my fans from pull to push and my temps dropped to down like 4-5ºc across all cores. Maybe you wanna expirement???
03-22-2009, 10:28 AM
Chicken Patty

Quote:

Originally Posted by scyzer

I'm 8+ hrs stable stressing using Prime 95. Will do a 1hr OCCT Linpack now, just to be doubly sure.

EDIT:

ARGH! I don't believe it... 40+ minutes into Linpack, whilst screen saver was on, Windows sorta froze. It SEEMED like it frozen, then from random keyboard bashing, it looked like it was going to return to desktop (start bar became visible) and then just hung. Not sure if it was a stability issue or just windows =.="...

EDIT2:

Okay... I tried 6x memory, 12x/13x uncore and still not getting anywhere with bclk.

Vcore was 1.4000
QPP/VTT was 1.3400
PLL was 1.88
VDIMM was 1.64

Need more help...

what about your other voltages, what do you have them set at?
03-22-2009, 12:18 PM
2slick4u

[QUOTE=Chicken Patty;3734327]your temps are fine, these things can run up to 100ºc. Just try to stay under 90ºc. Glad the settings worked out :)

thanks :)
i did another 10 hr test overnight and still stable :)
03-22-2009, 12:38 PM
2slick4u

Quote:

Originally Posted by Chicken Patty

your temps are fine, these things can run up to 100ºc. Just try to stay under 90ºc. Glad the settings worked out :)

yes they do a lot. Also I switched my fans from pull to push and my temps dropped to down like 4-5ºc across all cores. Maybe you wanna expirement???

Thanks for the help :)
Glad i can push it to 3.8ghz
Maybe later I'll try 4ghz when i get watercooling
Hope it will get to 4ghz with watercooling :P

Show 100 post(s) from this thread on one page