from the list which "should" or "might" oc better ?
OCZ4001024WV3DC-K - OCZ VALUE VX
or
GSKILL F1-3200BWU2-1GBGH BH-5
or
OCZ OCZ4001024ELDCGE-K BH-5
Printable View
from the list which "should" or "might" oc better ?
OCZ4001024WV3DC-K - OCZ VALUE VX
or
GSKILL F1-3200BWU2-1GBGH BH-5
or
OCZ OCZ4001024ELDCGE-K BH-5
just ordered SP3200 from newegg...im excited.
Perhaps I will do some banchmark this weekend and will post some results. Currently, I am doing burn-in for my TwinMos SP at 257MHz @ 2-2-2-6 @3.5vdimm. At 2-2-2-2, memtest give me a lot of errors. So decided to change to 2-2-2-6. (it still give me errors, but not as many as on 2-2-2-2). One more thing is that I would like to learn from you guys on how to post a screen shot in the forum. I got digital camera and any cable that connected to PC but I do not know how to submit the screen shot. Can I save my screen shot on a floppy and then attach the screen shot via the floppy in this forum. Really need help. For your info, I am using different computer to communicate in this forum.Quote:
Originally Posted by esdee
Just ordered my set of pc3200 SP's too. :banana: I need to replace my 2 x 512 CH-5's, one burnt out on me yesterday. They only did 245 @ 2-2-2-5 @ 3.45v.
I got the CH-5 from a friend that had them in an old rig, traded him my Geil pc4000 for the CH-5's, but now I am running only one CH-5 512 and it sucks.
The 1 gig of Geil sucked worse though, BSOD no matter what settings!
200 2-2-2-5 2.7v
http://users.skynet.be/pt1t/Twinmos/200-2,7v.PNG
210 2-2-2-5 2.7v
http://users.skynet.be/pt1t/Twinmos/210-2,7v.PNG
220 2-2-2-5 2.8v
http://users.skynet.be/pt1t/Twinmos/220-2,8v.PNG
245 2-2-2-5 3.2v
http://users.skynet.be/pt1t/Twinmos/245-3,2v.PNG
250mhz 2-2-2-5 3.3v
http://users.skynet.be/pt1t/Twinmos/250-3,3v.PNG
255mhz 2-2-2-5 3.4v
http://users.skynet.be/pt1t/Twinmos/255-3,4v.PNG
260mhz 2-2-2-5 3.45v
http://users.skynet.be/pt1t/Twinmos/lecture%20260.PNG
270mhz 2-2-2-5 3.7v
http://users.skynet.be/pt1t/latence.PNG
275mhz 2-2-2-5 3.9v (screen)
http://users.skynet.be/pt1t/Twinmos/TwinmosSP275.PNG
I m still testing stability :stick: and going to burn it !
edit : 1go Kit of twinmos SP 3500 i forgot it :D
http://users.skynet.be/pt1t/Twinmos/...sSP3500SPD.PNG
pt1t which ram ?
2*512Mo of twinmos sp pc3500 on modded Epox 9nda3+Quote:
Originally Posted by TEDY
Just ordered 4x512mb of these, hope I get results like yours :toast: My last 2 topped out at 250 with 3.5VQuote:
Originally Posted by Pt1t
Hello
Do that value PC3200 Twinmoses on 1A4T,AA4T are usually as good as Speedpremiums PC3200-3500 ??
Do you have in yours contries value on CH/BH-5 , too ???
Because in Poland there are a lot of normal value 3200 sticks 256 MB and 512 MB on 1A4T or AA4T ... I can even say that now, in Poland we have more Value on UTT/BH-5 than SPremiums :lol:
Some people in Poland clock that value to something about 250-255/2-2-2/3.4V on Nf4 (best 250/3.1V/DFI Nf4 on 1x512 MB AA4T), but I don't know that all of that value AA4T/1A4T are good ?!
Please post yours O/C results on Value PC3200 Twinmoses, specially if you have Nf2 board, but not only - please write also results on Nf 3/4 boards !
Thanks a lot .
Best Regards,
Peter
I bought the OCZ Value VX. Once I test them I will tell you how it goes.Quote:
Originally Posted by TEDY
please make your signature of what system you have and let me know how ocz value vx overclocks :)
I have TwinMOS A4AT ($95 @ newegg). On my DFI LP UT 250 i could do 240mhz @ 2-2-2-5 on 3.2v. I have a neo2 now so i cant really run them to potential (even 3.2v isn't really potential), but I'm getting an ultra-d within the next few weeks so I'll be pushing 3.6+ :D
I too want to know since the price of this has dropped to $104 at ATACOM.Quote:
Originally Posted by TEDY
Hi,
which chip u guys are getting when buying memory* from newegg?
*256MB DDR400 not speed premium (is there any chance to get BH5 ICs 1A4T? Is there any chance to get PSC AADT?)
256MB DDR400 Speed Premium (100% sure to get AA4T?)
512MB DDR400 not speed premium
512MB DDR400 SP
Dual Channel Kits (2*256MB) SP and not SP
Thanx
2x512MB TwinMOS DDR400 bought bout 2 weeks ago were 1A4T.Quote:
Originally Posted by andlcs
$95 at newegg? Did you get the TMII 1 gig kit rather than the Speed Premiums? If so, sounds like you either got lucky to get Winbond chips or TwinMOS is putting Winbond back on these as well.Quote:
Originally Posted by DamienKC
Do you guys think I should sell my Kingston KHX3200ULK2/1G (1gig TCCD) and buy some 2x512 TMSP400 and a booster for my Intel rig?
I bought TMII and did not ship with winbond. I called newegg and they don't have this value with windond for ages.Quote:
Originally Posted by jcollett69
And guess what. They have been cleaning the reviews they don't want so people buy them in mistake. They did to my review. I will never buy again from newegg
Today, i got Twinmos Mtec, AA4T
testing on NF2 Platform, here the result :
3.2V, 244-2-2-2-11, stable
http://i4.photobucket.com/albums/y10...ec/244_32v.jpg
3.3v, 247-2-2-2-11, stable
hmmmmmmh... bad result at 3.3v vdimm here :(
http://i4.photobucket.com/albums/y10...ec/247_33v.jpg
not yet burnin this memory
:rolleyes:
I don't get it ...
I been getting 250 at 3.2v ......now even 240 aint possible anymore....Did memory controller turned against me on CPU ?
I can bench 300*9 proc easily...
Anyone suggest?Quote:
Originally Posted by Mr. Tinker
Summers coming.....Quote:
Originally Posted by TEDY
that's not reason why memory oc lower, i'm cooling it with 120mm fan !!!
Just got my Speed Premiums from newegg. Consecutive s/n's, and 44b chips on them.
Just installed and running 240 @ 3.4v. Now going to burn them in and see what they will do.