Thanks Guys! :D
Printable View
Thanks Guys! :D
well, just so that people can see, at 270mhz and 3.2v, these settings are memtest stable.. i think my clawhammer's memory controller is what's preventing me from even booting at this point. try 2T, but it's still unstable in windows, and i couldn't save a good cpu-z validation file :slapass:
http://www.xtremesystems.org/forums/...id=34390&stc=1
Db updated. Thank you alterbridge. :)
My KHX PC2700 1GB sticks gained a LOT of stability going from Winchester -> Venice. Like 20-25 MHz same volts, same timings, same settings. Impressive :)
not the best but still playing with em... see sig
Anybody run 2x1gb in an NF2 yet?
Thinking about giving it a go...
im not sure a nforce 2 mem controller can handle that much ram but hey maybe it canQuote:
Originally Posted by David Coleman
________
Water bongs
brandinb
It's about banks, not about amount of RAM.Quote:
im not sure a nforce 2 mem controller can handle that much ram but hey maybe it can
How many banks can the NF2 support. A buddy of mine just ordered 2x1GB Ballistix for his NF2, I suppose we shall see results for that soon.
On a side note, I still need super pi 32m screens for some db members.
If you download the nvidia nforce2 specifications here http://www.nvidia.com/object/LO_20030610_5504.html it states that it supports 3gb of DDR 400 memory. Most nforce2 that im aware of (if not all) have 3 memory slots. So the nforce2 supports 1gb x 3.Quote:
Originally Posted by EnJoY
Edit: Reading over some more on that spec sheet. Look at the second page. It states this
- Supports 64MB, 128MB, 256MB,
512MB, and 1.0GB modules
• Support for up to 3.0GB Memory
Gigabyte made an NF2 board that had 4 slots for memory.
Fedex just droped off my Ballistix ! :woot:
Hopefully will have results later today ;)
Edit: well they are pretty ! hehe
Mine came in also today. Just messing around with them on my neo2. So my mem options are kinda... lacking. I can :banana::banana::banana::banana: around with memtest for benches. I'm gonna get onto ocing these guys for a few hours and find out what they can do.Quote:
Originally Posted by Major
Awesome guys! Can't wait to see some results for the db. :toast:
Tip guys... My ballistix Tracer errors like crazy at 2.8v. 2.6v fixed all my probs.. give the low voltage a chance!
Db updated.
Btw, nugzo, any further results with your stuff at that lower voltage? You're still number 1. :D
I'm trying to memtest these now at 250mhz. 8-3-3-3. I've been messing with the A64 options in memtest and I keep getting a couple thousand (about 2000 errors) errors at 99% on test 5. No matter what I tweak in memtest I cannot get rid of the errors. I just fired up 250mhz right off the bat considering that they should run it without a problem obviously... I've tried with anywhere between 2.6 and 2.85v.
Anyone got a clue? This is on my Neo2. I'm thinking that I MIGHT try my new DFI nF4 ... but I'm hesitant because I would have to be using a crappy PCI card until my 7800gtx comes in a few days.
get the nf4
That's what I was just gonna do. I don't get why I'm getting a couple thousand errors right at the end of test 5. I toyed with just about all the setting in memtest. I think this beta MSI Neo2 bios can't help too much.Quote:
Originally Posted by nugzo
anything so far??Quote:
Originally Posted by Major
________
Outdoor german
Quote:
Originally Posted by EnJoY
Nope not any higher :( Just more stable :)
has anyone else had problems running a divider? my patriot 3200 llk 2x1 is stable at 240 3-3-3-6, but whenever i try a divider it wont boot. even clearing cmos and trying didnt work.
here are some preliminary results with the Ballistix:
http://www.xtremesystems.org/forums/...ad.php?t=69390
280mhz so far, stable in memtest to 290mhz !
I'm a very happy camper so far ! :D
I have a question for the other NF4 people in here
My DFI NF4 SLI-DR is being a little b*tch with running 2x1gb of Crucial Tracer PC4000 ram.
It will boot once with both sticks installed but hangs right after the post beep when I restart the comp... I read up at dfi-street that to get dual channel running right I have to manually set my timings... (which I did) and I'm still not getting dual channel to get past posting. Also, i cannot get into the bios when I have two sticks installed...
Got a clue?
What bios are you using?Quote:
Originally Posted by DriveEuro
Use 1 stick an reflash to 623-3 bios