Printable View
About 20% increase in CPU power by my reckoning so if Linpack with SSE used 100W of CPU power then with AVX that would go up to ~120W. Temperature wise if Linpack with SSE produced a 40C rise over idle you might expect ~48C rise with AVX (20% increase).Quote:
Originally Posted by KGB7
LOL, I didn't knew that ASUS made a software to help OC... LOL...Quote:
Originally Posted by KGB7
Mine is stable at 4.8Ghz 1.35v
With the new ASUS Bios 1253, I made it past the 5Ghz, but it isn't worth the extra voltages...
5ghz@ 1.41v
5.1ghz@ 1.46v
5.2Ghz@ 1.51v
I reached my cpu's ceiling... I only did those voltages as testing purposes, and he was at those voltages very little time... Only booting up to Windows 7, not tested for stability
Over 4.8Ghz it's not worth the trouble, too much volts, and too much temperatures
On the Extreme board the only time I see these false warnings when stability testing is when the system is not really stable. When stable AI Suite works fine, even from my iPad.Quote:
Originally Posted by wongnog
I'm with bios 1253
And now having the issue allready reported here, I'm stuck at 68blck at windows, any solutions ?
How?? Are u sure that isn't CPU-Z mis-reading the clock? Try to clear your CMOS, if that doesn't work RMA the cpu or the motherboardQuote:
Originally Posted by st0ned
Did everything, and it still shows me 68Mhz. I know I ain't using the 1.56.2 Beta of CPU-z, I've formated the pc and I was lausy enought not to back up it... But nonetheless this version have worked fine for me so far. I also used AIDA for double checking and it gave me the same results...Quote:
Originally Posted by V3ctorPT
http://img337.imageshack.us/img337/5427/68mhz.jpg
Btw anyone would be kind enought to run a 1M run in my bad speeds to see if they get the same result ? Because I find them a bit faster then it was suposed with this settings... But I dont run 1M in a while so it might just be me getting too outdated :D
http://img413.imageshack.us/img413/6448/13515990.jpg
EDIT:
Lol, the board seems to point allways for 3400Mhz, if I set the multi 50x it will give me 68*50=3400, same for multi 37 as shown under... The this is for 37*92.8 I had a huge drop in performance.. WTF is going on...
http://img708.imageshack.us/img708/8411/pi2o.jpg
Here my first Sandy Result :)
http://img689.imageshack.us/img689/8523/sandy2f.th.jpg
Uploaded with ImageShack.us
I got same blinking line when i was at x51 without PLL overvoltage and with it when i had x56.It seems like we need further bios support to actually modify the value of internal PLL,just like Vcore,then things might get reaaaaaly interesting :DQuote:
Originally Posted by Leeghoofd
Hey, is there anyone who can help me detect what this "Unknown Device" is?
I've installed all drivers, win updates etc. although I can't seem to figure it out :/
Asus P8P67 Deluxe, 2600k, corsair GT 2k's
http://bildr.no/thumb/808814.jpeg
Bluetooth Device.Quote:
Originally Posted by tentp0le
Had the same type of issue yesterday after I installed new ram. I just set the memory timings and voltage and all of the sudden my BCLK Freq is stuck at 103.3 no matter what I tried it always booted to 103.3?? I loaded "Optimum Defaults" in bios and everything went back to normal.Quote:
Originally Posted by st0ned
Can you try running RealTemp when you have this problem?Quote:
Originally Posted by st0ned
RealTemp 3.67
http://www.mediafire.com/?n99nq4kn95u6i6a
CPU-Z 1.56.3
http://www.fileden.com/files/2010/4/.../cpuz_1563.zip
Thanks for that second link Stasio
Seems like the new 1253 BIOS is badly rushed and flawed. Stay away if you don't have major issues till everything settles and they finally release a good version.
please give a link to the beta 1253, on page asus latest version is 1053 beta also, the same goes for the support.asus.com, Where You take these beta versions??
http://www.xtremesystems.org/forums/...d.php?t=265477:)Quote:
Originally Posted by dupcengier24
Whats the best Bios for the P8P67 Pro?
So far looks like 1053 Beta is clocking best for most people. Be weary of flashing to the newer one, once you flash you can't go back :down:Quote:
Originally Posted by McLaren__F1
Aha I uninstalled the bluetooth application which comes with the MB CD, will check later if it's correct :) ty though...Quote:
Originally Posted by crazyea
Is it possible to disable the bluetooth completely in UEFI, or do I just have to disable it in the Device Manager?
You have to disable it in Device Manager, unfortunately. :shakes:Quote:
Originally Posted by tentp0le
It's the stupid board... I put my cpu at stock, it reboots 2 times, then when he turns on, he has EIST on (wich i always turn off), and the BCLK goes always to 103.3mhz...Quote:
Originally Posted by crossg
It's the BIOS (or UEFI, as u want to call it)...
Anyway BIOS 1253 is the best I had, I could pass 5ghz with this one, the others just stoped at 4970mhz.
Is it possible that I need more Vcore with 1253 than with 1003?
I would say it's not likely that degradation took place, because last stable settings on 1003 where 48x100, 1.300V, max temperature 78°C. Now I need 1.320V for 4.8GHz.
I didn't touch any advanced settings on either BIOS, just raising Vcore was enough.
Yeah many of us had 100% stable profiles on 1053 or the original BIOS that are now not stable with 1253.Quote:
Originally Posted by Gr1mR34p3r
why it is not possible to load an older version of bios? nor with the AI Suite II or using ASUS EZ Flash utility nor by asus bios updater, or by CrashFree Bios 3 utility??:confused:Quote:
Originally Posted by tool_462
I went from 1253 to 1053 without any issues throw ez flashQuote:
Originally Posted by dupcengier24
They updated the hardware version in the BIOS on all the boards except the Deluxe, so only the Deluxe boards can roll back the BIOS. They are supposed to be working on a fix.Quote:
Originally Posted by dupcengier24