G.SKILL PIS F3-17600CL7D-4GBPIS 2200 7-10-10-28 1.65V P55 Series

Printable View

Show 100 post(s) from this thread on one page

05-11-2010, 12:24 PM
hiwa

Quote:

Originally Posted by jojodancer

Looks like 2 x 2gb kit are much more easy to tame than 4 x 2gb kit!!!!

I still have trouble to stable this setup at Prime.

oh man i thought u want bench, keep 8gb @ 2200 prime stable is not that easy you think, try 2000 and tighter timings ;) like 7-9-7
05-11-2010, 02:00 PM
KanGaXx

Quote:

Originally Posted by hiwa

oh man i thought u want bench, keep 8gb @ 2200 prime stable is not that easy you think, try 2000 and tighter timings ;) like 7-9-7

that's right.
in my experience keeping 8gb @ 2133/2200 occt/prime stable is very very hard unless you have a godlike strong IMC.
i found more easy keep 8gb @ 2000 cas 7 o cas 8 :)
05-11-2010, 02:10 PM
jojodancer

yeah. in 2200MHz, the system can only hold up to 1.5 hours before one worker stopped at Prime :rolleyes:

maybe I need a liquid hydrogen cooling system for the cpu and rams :rofl:

what are your voltages to get it stable at 2000MHz?

and timings should be set from CL7-10-10-28 (both channels) to ??
05-17-2010, 12:19 PM
jojodancer

stable at 2040MHz and cpu speed at 4.08GHz with CL7-10-10-28 stock timmings.

try to push up to 2050MHz with 4.10GHz but no luck.

Any good suggestions?

vtt 1.42
cpu 1.30
dram 1.66
pch 1.05
pll 1.86
05-17-2010, 12:25 PM
hiwa

you are in very good point at 2040
leave it there, trust me ;)
05-17-2010, 12:31 PM
zsamz_

Quote:

Originally Posted by jojodancer

stable at 2040MHz and cpu speed at 4.08GHz with CL7-10-10-28 stock timmings.

try to push up to 2050MHz with 4.10GHz but no luck.

Any good suggestions?

vtt 1.42
cpu 1.30
dram 1.66
pch 1.05
pll 1.86

you might wanna try 7-9-8-26;)"thats my 24/7 for 2100mhz'' or 6-9-8-26 if you lucky
05-17-2010, 01:06 PM
jojodancer

2100MHz!!!

Seems like a long way to go :eek:

your voltage settings please :D
05-17-2010, 02:04 PM
zsamz_

Quote:

Originally Posted by jojodancer

2100MHz!!!

Seems like a long way to go :eek:

your voltage settings please :D

1.4vtt 1.65 vdimm i have a 860+evga ftw
i'd go higher if cpu under water

p.s after burnin ram in it got better;)
05-17-2010, 09:59 PM
jojodancer

Quote:

Originally Posted by zsamz_

1.4vtt 1.65 vdimm i have a 860+evga ftw
i'd go higher if cpu under water

p.s after burnin ram in it got better;)

Cool! :clap:

CPU speed?

PCH?
PLL?
05-17-2010, 10:34 PM
zsamz_

cpu around 4.1
i dont touch pll volts since i degraded my e6850 with 1.7v pll
burn your ram in before you move on
i burned mine in on rex 1.72v 1940mhz 6-9-8-24 6 hours of memtest

Quote:

Originally Posted by jojodancer

Cool! :clap:

CPU speed?

PCH?
PLL?
05-18-2010, 11:41 AM
jojodancer

need to find the right voltage balance for 7-9-8-26! :cool:

not yet to success!

tried few times and have bunch of BLUE SCREEN OF DEATH! :eek:

btw, what mobo are you using?
07-20-2010, 02:00 PM
siavash_shojaee

i like this memory
2807mhz@cl8-11-11-31
everything on AIR :up:
07-20-2010, 06:01 PM
Johnny87au

these PSC's right?
08-06-2010, 06:18 AM
hiwa

yes
when u see +2 on tRCD VS CL means it's PSC thought on all memories
08-06-2010, 07:14 AM
matose

Welcome back hiwa ;)
08-06-2010, 08:14 AM
hiwa

Quote:

Originally Posted by matose

Welcome back hiwa ;)

I like when I see there still someone in this world that believes in me :up: it gives me a lot of energy to back in NEW oc world :)
08-09-2010, 11:31 PM
Leeghoofd

Forget the past and move on, you are stil ûber skilled... plus my girlie still likes you :p
08-10-2010, 12:44 AM
Hondacity

Quote:

Originally Posted by hiwa

I like when I see there still someone in this world that believes in me :up: it gives me a lot of energy to back in NEW oc world :)

you still have my vote..jsut don't do it again:up:
08-10-2010, 01:21 AM
hiwa

thanks guys
i play with 3 X 4gb Tridents soon, will update kingpin thread.
Stay tuned :up:
08-10-2010, 01:38 AM
Kentaro

:up: Good to see our memory guru is back. You are always very helpful
08-10-2010, 01:47 AM
siavash_shojaee

welcome back hiwa jan:up::welcome::toast::party::YIPPIE::bounces:
08-13-2010, 07:09 PM
trans am

hiwa you have always been cool to me. while you were out I started to mess with the pi 7 kit. I have 2 sets of 2gbx2. I haven't taken the time to see which are the best sticks. but what should I expect on a clarksdale 655k and no special cooling on the ram, just ln2 on the cpu. This is what I got while you were out. (no os tweaks) i think ram volts were around 1.68v in the gigabyte itx contest. Im just trying to figure out what these are capable of so I can start somewhere. can you guys bring me up to date? I dont feel like reading 11 pages.

http://hwbot.org/competition/gbt_h55_mitx scroll to the bottom. that was on these sticks.
08-14-2010, 02:34 PM
Tomasis

hiwa, nice to see u.. mem section is so empty without u :)
08-15-2010, 01:24 AM
hiwa

Quote:

Originally Posted by trans am

hiwa you have always been cool to me. while you were out I started to mess with the pi 7 kit. I have 2 sets of 2gbx2. I haven't taken the time to see which are the best sticks. but what should I expect on a clarksdale 655k and no special cooling on the ram, just ln2 on the cpu. This is what I got while you were out. (no os tweaks) i think ram volts were around 1.68v in the gigabyte itx contest. Im just trying to figure out what these are capable of so I can start somewhere. can you guys bring me up to date? I dont feel like reading 11 pages.

http://hwbot.org/competition/gbt_h55_mitx scroll to the bottom. that was on these sticks.

oh man clarkbar had a crappy IMC, you have to try the best 6-8-6 @ 2:8 devider

Quote:

Originally Posted by Tomasis

hiwa, nice to see u.. mem section is so empty without u :)

thanks :)
05-23-2011, 06:19 AM
utilizatori

hi all :)

will this kit fit my 2600K?
I have Super talent 2200 CL8-8-8-24
but I think sandy don't like elpida chips

Show 100 post(s) from this thread on one page