Phenom II X4 @ +6 GHz by Team Finland

Nice chart Pieter! The gain/loss is minimal like we see, but of course it would be cool to use higher link speed.

the key thing seems to be to run in HT1.0 mode - it doesn't mean you cant run above 1.0GHz (just use x5 multiplier) ;)

btw, 3dm2k1 Nature responds to PCIe / HT bandwidth more than most 3D benchmarks do. 3D06/05 for instance should see much smaller delta (at least this was the case last time I checked - and that could have been a while ago...)

So it has nothing to do with scaling, only about using the 1.0 mode? (higher HT link means HTT overclocking, mostly quite limited)

What about 300 mhz reference-clock?

http://www.planet3dnow.de/photoplog/file.php?n=3943&w=l

We used FOXCONN Destroyer so it seems this board is quite nice for Deneb. :)

Quote:

---

Originally Posted by SF3D

Nice chart Pieter! The gain/loss is minimal like we see, but of course it would be cool to use higher link speed.

---

If it affects the PCIe lanes, it might affect other hw as well. I'm picking up 4 I-ram drives tonight ... let's find out if the HT link affects harddrive performance as well :D

Quote:

---

Originally Posted by MusicIsMyLife

What about 300 mhz reference-clock?

http://www.planet3dnow.de/photoplog/file.php?n=3943&w=l

We used FOXCONN Destroyer so it seems this board is quite nice for Deneb. :)

---

Wow ... very(!) impressive

How easy was it to reach this frequency? Is it only screenshot stable?

Quote:

---

Originally Posted by massman

How easy was it to reach this frequency?

---

My teammate hoschi reached this frequency. As far as I know it wasn´t a big problem. But it was affected by the memory. There seems to be differences when using different slots. Saaya is contacted and after we do some additional testing he will look into it.

Quote:

---

Originally Posted by massman

Is it only screenshot stable?

---

SuperPI 1m and wPrime 32m ist done with that bus speed, 2k6 is done up to 295 mhz. :yepp:

Quote:

---

Originally Posted by MusicIsMyLife

SuperPI 1m and wPrime 32m ist done with that bus speed, 2k6 is done up to 295 mhz. :yepp:

---

That sounds awesome indeed.

Quote:

---

Originally Posted by MusicIsMyLife

SuperPI 1m and wPrime 32m ist done with that bus speed, 2k6 is done up to 295 mhz. :yepp:

---

Did these tests got significant changes with higher HTT?

Quote:

---

Originally Posted by Zucker2k

That sounds awesome indeed.

---

Yes. I felt off my chair when hoschi told me that he reached that clockspeed.

Quote:

---

Originally Posted by Morais

Did these tests got significant changes with higher HTT?

---

I don´t think so. Performance went up due to higher nb-clock (multiplier 9 -> 2.7 ghz nb-clock).

Quote:

---

Originally Posted by MusicIsMyLife

Yes. I felt off my chair when hoschi told me that he reached that clockspeed.



I don´t think so. Performance went up due to higher nb-clock (multiplier 9 -> 2.7 ghz nb-clock).

---

He can definitely take down major records with those clocks even with modest cpu clocks.

Quote:

---

Originally Posted by Zucker2k

He can definitely take down major records with those clocks even with modest cpu clocks.

---

We currently don´t talk about record breaking because we don´t know how this baby will perform under ln2. But I´m sure that we will have a lot of fun. :yepp:

This saturday we meet for an ln2-session with this setup. And we hope to get some nice scores. :D

Quote:

---

Originally Posted by Halk

Would you mind linking that, I wasn't able to find it?

I'd like to know when the NDA ends, but I suspect that's under the NDA? :)

And of course when these go retail, but I'm pretty sure that's NDA too.

---

here is the Tomshardware link
http://www.tomshardware.com/news/tom...m-II,6702.html

Good to hear destroyer can run and good run with deneb ;)

MusicIsMyLife, you have es/retail mb?

Quote:

---

Originally Posted by macci

the key thing seems to be to run in HT1.0 mode - it doesn't mean you cant run above 1.0GHz (just use x5 multiplier) ;)

btw, 3dm2k1 Nature responds to PCIe / HT bandwidth more than most 3D benchmarks do. 3D06/05 for instance should see much smaller delta (at least this was the case last time I checked - and that could have been a while ago...)

---

hmm, so if I will oc by htt and I won't go higher than 1000 mhz I will have cb ?

or

for high mhz's only multiplier is good ?

WOW! Nice, very nice. I want ....

Quote:

---

Originally Posted by Fatalbert

Good to hear destroyer can run and good run with deneb ;)

MusicIsMyLife, you have es/retail mb?

---

I got this motherboard from FOXCONN Germany because I did a review about this board. It should be retail version.

Now we take the destroyer for overclocking our Deneb. :D

first we should have deneb :D

I haven't :(

you have so fight :D

eot ;)

btw

you tested deneb on new bios for it ?

Quote:

---

Originally Posted by macci

btw, 3dm2k1 Nature responds to PCIe / HT bandwidth more than most 3D benchmarks do. 3D06/05 for instance should see much smaller delta (at least this was the case last time I checked - and that could have been a while ago...)

---

Apparently 06 is quite sensitive for HT Link frequency as well. Check the graph Tye sent me a few hours ago:

http://i154.photobucket.com/albums/s...man-/K10HT.png
(All credits go to KTE)

Note, though that the graphic card's power is less than in my setup (HD3850 versus HD4870X2) and that he ran the entire 3DMark01.

He linked me these as well:

http://img413.imageshack.us/img413/3...0nb2khtez6.png

http://img401.imageshack.us/img401/4...b2300htmf4.png

I'd say the difference in GT2 is significant.

Quote:

---

Originally Posted by Fatalbert

btw

you tested deneb on new bios for it ?

---

Yes, saaya sent me two new versions. But as far as I know he already tested deneb with the latest official bios. Cpu model is "unknown" but it works.

thanks for the info :D ;)

eot totally.

Hey Sampsa & SF3D

I have been reading through your notes, and so far I see these recommendations to get 6Ghz. 1.95+ vCore, set HT to 1.0 (1ghz / 5x). Various basic "Cpu" settings, CnQ.. and so forth..

I am curious if you bump any other voltages in BIOS to get it to by Crysis Stable at 6Ghz. Which is a VERY impressive accomplishment.

Any additional settings for the GB board would greatly be appreciated.

Ton

hey guys, just wondering what BIOS you were running on the Gigabyte MA790GP? if it was newer than F2A, any chance of a link? TIA

Yesterday we made 6GHz+ as well. All four cores, no coldbug issues... Just pure fan!!!:up:

More info here.

Quote:

---

Originally Posted by dread77

Yesterday we made 6GHz+ as well. All four cores, no coldbug issues... Just pure fan!!!:up:

More info here.

---

That's really great http://vozforums.com/images/smilies/Off/sweet_kiss.gif The vcore is so impressive :up:

Quote:

---

Originally Posted by dread77

Yesterday we made 6GHz+ as well. All four cores, no coldbug issues... Just pure fan!!!:up:

More info here.

---

Really good to see 6GHz on retail CPU. Like I said, there shouldn't be any problems hitting those speeds. But of course, let's wait for more results.

What was your max benchable speed?