thanks buddy !Quote:
Originally Posted by kagula323
Printable View
thanks buddy !Quote:
Originally Posted by kagula323
donQuote:
Originally Posted by donmarkoni
can you tell me whats the good ? as i tried and dont feel it as good as 1850
thanks in advance
Sergio
108 x 51 mem on 2000+ 9-11-9-27 1T
http://img41.imageshack.us/img41/2447/5500108.png
Uploaded with ImageShack.us
Well, at least for me, it's as stable as 1850, but with added option for Extreme Tweaking and it plays good with Elpida Hypers.Quote:
Originally Posted by andressergio
There is one thing I noticed last night, that you could check for me, if you have time. And all you M4E guys. :)
Write Recovery time (tWR) is always set at 8, no matter the speed (1600/1866/2133) or Memory Boost, when set on Auto.
Thanks! :up:
i had troubles while my rig was outside on test bed as mice and keyb didnt work...also wouldn boot on same settings as 1850, as for memory boost i cant use it maybe cauz im on 2x4GB 2133 CL9 sticks i just get reboot and shuts offQuote:
Originally Posted by donmarkoni
thanks don !
Sergio
Oh you guys are evil !! Sergio has been gigaexorcised... don't push that Bclock 24/7 man... it's not worth loosing the board...
lmao jajajaQuote:
Originally Posted by Leeghoofd
no its just for a quick screen, im on 5Ghz 100x40 1,408 load / 1,416 IDLE
thanks for your advice
Sergio
2600K @ BCLK 108 X 50 = 5.4GHz
Asus Maximus IV Extreme-Z
GSkill RipjawsX 2200C7 2X2GB @ 2300MHz 7-10-7-27-1T
http://i458.photobucket.com/albums/q...2600K/108b.jpg
very nice !
great job, especially on the memory 2300 c7:up:Quote:
Originally Posted by owikh84
nice nice owi !Quote:
Originally Posted by owikh84
Quote:
Originally Posted by fab-45
Quote:
Originally Posted by l0ud_sil3nc3
thanks guys, i've never got this 108 BCLK & 2300C7 on UD7.Quote:
Originally Posted by andressergio
MIVE-Z vs UD7 = 2 - 0 :up:
I'm having a little problem here. I was using BIOS 1409 here without problems, now resolved now upgrade to version 1850, and the voltages are above the real values that I set in the BIOS.
In 1409 this did not happen, I decided to go back to this version, but the problem now persists in staying.
Example: set DRAM Voltage 1.65V (BIOS), real (sensor) is 1.68V, 0.03V in ever increasing, it happens DRAM Voltage, CPU PLL, VCCIO, VCCSA.
Does anyone know how to solve this now?
SS:
All options to AUTO in the BIOS, it looks like now:
http://www.abload.de/img/erromuz2.png
Don't know if it's the same problem but if they are anything like the sensor voltages on my P8P67-EVO then it may just be noisy readings. I noticed this on the EVO B2 and still there with the replacement B3. Using a multimeter showed at least the DRAM voltage was much steadier than the sensor would indicate.
voltages have always read a bit higher for me than what I set.
my UD7 boots 107 but not as stable as the MIVE, check above i did 108x51 on 8GB 2000+ CL9Quote:
Originally Posted by owikh84
weird l0ud mine reads on all programs perfect what i set in biosQuote:
Originally Posted by l0ud_sil3nc3
http://img638.imageshack.us/img638/116/5ghzsensor.png
dang would be nice to make the pics a bit bigger as no matter what i post it looks small
I really hope it's just an error of the sensor itself, because I could not return as it was before at all.Quote:
Originally Posted by some_one
Here before the sensor showed values just as I left the BIOS.Quote:
Originally Posted by l0ud_sil3nc3
Ex: All AUTO, showed 1.056V (VCCIO and VCCSA) showed DRAM 1.654V. Now the most is reading 0.03V at all options.
Here too was reading the voltages correctly andressergio. It was not until I update the BIOS and it started to happen. Any ideas?Quote:
Originally Posted by andressergio
hey bro im on bios 1850 as 1902 i didnt like, what bios are you on ?Quote:
Originally Posted by _AntLionBR_
saludos desde Uruguay ;)
Sergio
Before I was with the 1409 (reading the voltages correctly), I am now currently with 1850.Quote:
Originally Posted by andressergio
dang...and if you go back ? it shows correct ?Quote:
Originally Posted by _AntLionBR_
Notice some of the hwmonitor volts are different to sensors, what sort of max/min do you get if left running awhile?[/QUOTE]Quote:
Originally Posted by andressergio
Looks good and doesn't break the board out to the right. A quick right click and view picture shows it in it's full glory, at least on FF.Quote:
Originally Posted by andressergio
yes hwmonitor does so, measure max and min, when load idle for ex, and volts are very accurateQuote:
Originally Posted by some_one
Looks good and doesn't break the board out to the right. A quick right click and view picture shows it in it's full glory, at least on FF.[/QUOTE]
you meant click and goes to the link, pic do notha if i do righ click aint have that quick view
cheers
Sergio
almost there, this time with 2133C8 BBSE kit... :w
2600K @ 107.5 X 50
Asus Maximus IV Extreme-Z
GSkill RipjawsX 2133C8 2X2GB @ 2293MHz 8-9-8-24-1T
http://i458.photobucket.com/albums/q...33c81075-1.jpg
nice owi i love 2x2 2133+ kits i have one of mushkins 2133 CL7 will try later for now look thisQuote:
Originally Posted by owikh84
I2600K @ 100x56 2 cores 2 threads (not to give more volts to this nice chip)
2x4GB Patriot Xtreme 2133 9-11-9-27 1T
MIVE BIOS 1850
http://img194.imageshack.us/img194/9434/5600spi32.png
Uploaded with ImageShack.us
Looking good Sergio! Do you think it can bench 57x 2c/2t?Quote:
Originally Posted by andressergio
i think so as it needs low vcore much lower than all the ones i tested, but look this SO weird, it booted passed POST and showed windows prompt till x59 on older BIOS now on this 1850 dont go over x56, also i was able to x51 with no internal PLL and with this bios only till x50 then needs it...so weird man, lovely board but i cant save my OC profiles like on giga so i flash i will loose all and im getting used to learn this bios, so once i write down all settings i will flash to try again, but its so weird i cant believe, or either something happened to the chip or the BIOS got confusedQuote:
Originally Posted by PolRoger
for now i can bench at 56x on low volts that i was searching so long for that
thanks for your mesage pol
i still have the x54 beauty i love that chip
cheers !
Sergio
No shows do not. Now I update any bios that this is happening in the sensor. I do not know what else I do, I hope it's just an error in reading or something.Quote:
Originally Posted by andressergio
Take photos man, heaps quicker while you're testing lots of HW and settings :)Quote:
Originally Posted by andressergio
hey :)
Do I need to have LN2 switch on the maximus 4 set to on for overclocking or is that not needed?
mentions really low temps but is this ONLY for cold boot issues and nothing more?
also am I correct in thinking that with the PCI E slots for graphic cards..
For single card it would go into top red PCI-E?
If it's cross fire/SLI then one card would go into the second red slot and the other card
would go into the last red slot at the bottom?
thanks :)
thanks man but ASUS should improve a profile save to USB as GIGABYTE, as such a nice mobo and dont have this featureQuote:
Originally Posted by CryptiK
Anyone, please?Quote:
Originally Posted by MonsterDK
The LN2 switch is not needed for normal overclocking. A single graphics card will go in the first PCIe x16 slot and if running a second card insert that card in the 3rd PCIe x16 slot.Quote:
Originally Posted by MonsterDK
thanks :)Quote:
Originally Posted by Praz
In the manual it says...
"In CrossFireX or SLi mode, use PCIE_X16/8_1 and PCIEX8_3 slots for PCI Express x 16 cards to get better performance."
So the 3rd slot will run at 8x speed ?....as it says...
"PCIe 2.0 x16 slot with x8 bandwidth"
Yes slot #3 will run at x8 speed. But this slot goes directly to the processor. Slots 2 and 4 go through the NF200 chip.
So sticking the cards in 2 x 16x is not always the best way?Quote:
Originally Posted by Praz
The short answer is not always. You should just go ahead and test SLI/Crossfire in slots #1 & #3 and then test with cards in slots #2 & #4 and you will see the difference.
Just Ordered this board and swap it with me P67A-UD7. I hope this board is good :) and good bios support !!! plz plz plz
oh man you gonna love itQuote:
Originally Posted by qgshadow
night and day between the gigabut ud7 and the MIVE
even andresergio got gigaexorcised:rofl:
nice new word Leeghoofd:up:
tks again shamino for these boards
yeah nice word lolQuote:
Originally Posted by zsamz_
im loving this mobo qgshadow u will be crazy with it
Yes Can't wait to test the board.
Do i need to use both Molex Connector?
and any advice on best bios settings for 5ghz
no need of molex if u not running 3 SLI or QUADQuote:
Originally Posted by qgshadow
use 75% LLC
load extreme profile
test
update to BIOS 1850
only if you wanna see your 24pin :explode:Quote:
Originally Posted by qgshadow
you runnin trifire;)
andresergio is right 1850 is best
So i only need the bottom molex, since the top one is for additionnal CPU Power..
And the bottom one for PCI-E Lanes?
Hi,
I want to put my Asus Xonar Essence STX sound card into the PCIe 4 x slot at the bottom of the board. If this slot is populated does it degrade any other PCI slots?
I've looked in the manual, but still left me unsure.
thanks :)
Im No Expert, but if you only use SLI or Crossfire with 2 GPUS, it wont change anything, except that you have a better sound card.Quote:
Originally Posted by MonsterDK
1 molex should be enoughQuote:
Originally Posted by qgshadow
Wow.... I put everything together...
First boot...
No POST, Red light close to the 28pin connector lights up, and its the CPU Led...
WTFFFF
nvm it as the stupid LN2 mode switch , ON by default... thats pretty dumb
oh man u r cursed lolQuote:
Originally Posted by qgshadow
ln2 mode is off by default, thats how i got mine(OFF)
Mine was ON hahah :\
I am upgrading my secondary rig from Bloomfield to Sandy Bridge with a P8P67 LE. I decided to move my current 2600k from my main rig to the P8P67 LE and go buy a new 2600k hoping I would get a good batch (or at least one that is better than my current chip). I just returned from getting a 2600K from Microcenter Batch# 3103B306. I am excited as this batch is almost identical to Hazzan's 59x 3103B326 chip and posts here on XS state 3103B3XX chips tend to be great clockers.
I am going to redo some of my watercooling and swap chips and will post my test results shortly:)
I don't know why but the 2 chips i bought online are costa rica, and costa rica tend to overclock badly :\
Hi,
Looking for some advice please...
I've just got my system built.
But I cannot install windows 7, I get as far as the "windows is now loading" and that's s far as I can get.
bios is latest and also default settings.
I've tried to also run memtest but the system just reboots.
I've removed all contacted USB devices apart from the keyboard
Running the following...
2600k
Mushkin ridgeback (2x8gb)
Enermax 1000w psu
1 x ati card
pioneer bluray drive
With a Noctua d14 cooler.
No other settings in bios have been changed.
Any help appreciated. Thanks
i tried 4 and where good clockers but they eat vcore like crazy...but for me Malay are the best ones, of course harder to find oneQuote:
Originally Posted by qgshadow
4x8GB ? dang...Quote:
Originally Posted by MonsterDK
try only with 4GB and see if its mem
Sorry my error 2 x 8gb
i would try only with 1 stick mate, remeber they go also on 1,3 slots. i use mushkin and never have problems with it, if you can enter BIOS just put the volts they need, tell me exact what mem r u usingQuote:
Originally Posted by MonsterDK
cheers !
Sergio
http://www.aria.co.uk/SuperSpecials/...roductId=44358
This is the ram Im using
In the manual it shows to install ram in A2 & B2 so that's red slots 2 and 4
so u use the same ram i have...u shouldn have any troubles with it, so that happens when you are trying to install win7 ? u are installing on normal HDD or SSD ? give me plz more details, can u enter to BIOS ?Quote:
Originally Posted by MonsterDK
Yes I can get in to bios.
I have SSD drives.
But it seems odd I cannot run memtest from the cd. The system just resets before loading memtest.
I've just pulled the second stick out and tested. Same result. So I swapped the sticks over. Same result again. So it seems each stick on their own makes no difference.
2600K @ 5.0GHz Costa Rica
GSkill RipjawsX 2133 8-9-8 2x2GB
Ambient temp: 34C
http://i458.photobucket.com/albums/q...0153vLLC75.jpg
http://i458.photobucket.com/albums/q...0153vLLC75.jpg
Still hunting for a better chip:rolleyes:
put the link owi as image is so smallQuote:
Originally Posted by owikh84
Try running the sticks at a lower frequency, e.g. 1333 mhz, if thats unstable try, 1066mhz, try one stick, if stable, try 2 together all at the lower rated speed.Quote:
Originally Posted by MonsterDK
mine is ON should i turn off ? i dont use LN2Quote:
Originally Posted by Hondacity
cheers
Sergio
WOOOO 94ºC your chip is burning like hell!!!
Watchout !
BTW; 1.52vcore is too mutch.
Quote:
Originally Posted by owikh84
just got the maximus iv extreme-z, and I was wondering if there was anyway to run 2 video cards on x16/x16?, it seems for 3 cards I can do x16/x16/x8 but for 2 cards the manual says x8/x8 which I found kind of weird.
What voltage should be change for overclocking i7 2600k for 5.0ghz+. I have Maximus IV Extreme-Z68? Where in the BIOS, the QPI Voltage
Thanks
Put them in slots 2 & 4 to run both at 16x, but if you have time, test them in slots 1 & 3 at 8x both. You should get slightly better results. ;)Quote:
Originally Posted by i_max2k2
If you want to run 3 graphic cards at 16x, you should use slots 1, 2 & 4.
Except obvious (vCore) you should try playing with VccSA & VccIO, which are something like QPI/VTT. Many say VccIO is the key, but I would not forget about VccSA. Don't forget DIGI+ VRM section. :yepp:Quote:
Originally Posted by M_T_M
After all the faffing aroud. As soon as I disable Marvell in BIOS, windows will install and the immediate issues I was getting have gone.
Anyone any ideas why Marvell would do that?
I have Intel Sata as RAID for a Raid 0 setup.
thanks
Where is QPI/VTT voltage in bios.? I have bios version 0210? I tried updating the bios but it says this: Selected file is not a EFI BIOS. please help. Can anyone tell me instructions.
Thanks
upgrade to 1850 mate just put it on a flash drive and load from last part of the menu of BIOSQuote:
Originally Posted by M_T_M
Where to download bios version 1850 because it is not on the website http://www.asus.com/Motherboards/Int...emeZ/#download
thanks
No, no, no, andressergio, he has M4E-Z.
M_T_M, there is no QPI/VTT voltage, as I said, VccIO and VccSA are the voltages for memory controller, DMI, IO, etc.
And then is 0403 last bios for M4E-Z?
ouch sorryQuote:
Originally Posted by donmarkoni
What is the max voltage for 24 / 7.? I have i7 2600k on water.
I have problem with overclocking my i7 2600k. My settings:
Vcore: 1.44V
LLC: 100%
Dram Voltage: 1.65V
PWM mode: Extreme
VFFM: 350
Vcore phase control: Extreme
VCCSA/IO: 1.20V
I got a BSOD code: 0x000000124. Please help
124 = raise vcore most likely solution
hey friend how are you ?Quote:
Originally Posted by CryptiK
yeah 124 raise vcore
How much is the max voltage for 24 / 7.? I have i7 2600k on water?
Thank you! this is good info! I'll test it on both slots :) , and those are some good clocks on the 580, is it on water?Quote:
Originally Posted by donmarkoni
@M_T_M
Depends on your cooler, but I don't go over 1.5-1.52V for 24/7. :D
Some will say that it is too high, but it all depends on how long you want your CPU to last. I don't need mine to last 10 years. ;)
@i_max2k2
Glad to help. :) Yeah, it's on water. Hardly ever goes over 50°C.
You were right! Ran 3D mark (Vantage/11) on both 2/4 and 1/3 configs with my 470 SLI, and 1/3 was better even being at x8 (by about 200-300 points), I'm guessing 1/3 is native Z68 Chipset lanes, and in 2/4 is it 16 lanes from P67 and 16 lanes from NF200?Quote:
Originally Posted by donmarkoni
Yesterday I tried overclocking my vanilla 580 (stock hsf), I was able to get upto 950/1900/4250 @ 1.15v, that was the max voltage I think evga's bios allowed, and for some weird reason, I dint have issues while doing artifact scanning at lower volts, but as soon as I ran 3D mark 11 the drivers crashed, this happened several times, I cleaned up my drivers, that dint help, then I tried increasing the voltage and thats when I realized the issue was lower voltage, but I would think in such circumstances I would artifacts atleast in Furmark or something, did something like this happen with your cards too?
The ambient temps were low and on max loads I wasnt going over 74c in Furmark/3D mark 11/ Vantage, so I think I have a little more headroom for slight higher voltage, and in 3d mark 11 I went from P6500 to ~ P7400, which I thought was pretty significant, this is my first experience with ocing the 500 series, and it seems fermi scales very well after 900Mhz. But I'm not sure what are safe voltages/temps for these cards for 24/7 use, how much voltage are your cards running on?
Lanes 1&3 are 8x each directly to the CPU. Lanes 2&4 are 16x each through the NF200 chip which adds latency causing the lower scores.
Quote:
Originally Posted by deachus
Ok that makes sense, so now I'm wondering, in a TRI SLI situation, when we have cards split up between NF200 and P67/Z68, would the performance actually degrade because of this latency? Not sure how that would work, I'm just guessing that the some lanes will be going to the chipset some to NF200.
Quick one for you. How's the bios support been for the P67? I'm about to get a Z68 but I have an offer on a P67 that I might take up and save some cash. If the bios support for the P67 has been lacking since the Z68 came out I'll just put out the extra cash for the Z68. If the P67 support has been up to par then I'll save some cash. I just don't want to end up with a board with no bios updates.
Thanks
Bios support has been great for MIVE and pretty often:up:
Asus has been on top of it with bios updates for the MIVE, MIVE-Z and the MIVE Gene. It seems all the ROG boards are getting bios updates at about the same time.Quote:
Originally Posted by Devil_Dog
p67?Quote:
Originally Posted by deachus
yes, Maximus IV Extreme, not Z
Thanks brother!:up:
I run my cpu at 1.06v on manual but when I try to enable offset so that the cpu will run at less volts when idle I cannot adjust the volts as they reset at 1,2v.
Is there anyway to run manual at 1.06v and also enable the cpu to idle at .08 ?
Thanks.
We should not spam this thread, as there is dedicated thread for GTX 580 overclocking and stuff. You have PM. ;)Quote:
Originally Posted by i_max2k2
Hey,
Firstly I want to thank andressergio for the help he has given me to even get the system working and OC'd. As I did initially have some problems that was driving me crazy. :up:
RIG:
MOBO: Maximus IV Extreme
CHIP: 2600k (Costa Rica) @ 4.8Ghz
Noctua D14 (swapping out for a Antec 920)
8GB Mushkin Redline Ridgeback #997000 2 x 4GB @ 2133 9-11-9-28 1T
BIOS: 1850
100 x 48
CPU Vcore: 1.45v
Dram: 1.65v
VCCIO: 1.08125v
Everything else AUTO.
Was wondering if someone would please advise on what else I need to change that is set as AUTO.
And also any other BIOS settings for a 4.8 OC.
I have taken screenies of the BIOS in full to ensure nothing is missing. And uploaded to imgshack.
Sorry to upload so many images but thought better to than miss something important.
Any help / advice greatfully accepted.. (thanks)
http://img41.imageshack.us/img41/192...6161451.th.pnghttp://img641.imageshack.us/img641/7...6161500.th.pnghttp://img833.imageshack.us/img833/3...6161509.th.pnghttp://img710.imageshack.us/img710/3...6161513.th.pnghttp://img810.imageshack.us/img810/9...6161536.th.pnghttp://img24.imageshack.us/img24/921...6161554.th.png
http://img690.imageshack.us/img690/2...6161601.th.pnghttp://img839.imageshack.us/img839/3...6161623.th.pnghttp://img690.imageshack.us/img690/6...6161630.th.png
http://img194.imageshack.us/img194/7...6161653.th.pnghttp://img215.imageshack.us/img215/6...6161703.th.pnghttp://img171.imageshack.us/img171/2...6161709.th.png
http://img263.imageshack.us/img263/5...6161718.th.pnghttp://img709.imageshack.us/img709/6...6161730.th.pnghttp://img804.imageshack.us/img804/9...6162112.th.pnghttp://img546.imageshack.us/img546/4...6162124.th.png
Glad u are happy and your system runing strong now mate !Quote:
Originally Posted by MonsterDK
enjoy !
Cheers
Sergio
:) Thanks.Quote:
Originally Posted by andressergio
Just need help getting everything else locked down that should not be on Auto etc.
If someone would kindly help me, that is :D
Some setting better leave it at autoQuote:
Originally Posted by MonsterDK