Intel 4.5GHz & 5GHz LinX Stable Club

Printable View

Show 100 post(s) from this thread on one page

10-22-2010, 07:04 AM
zalbard

Quote:

Originally Posted by miahallen

Zalbard...the OP still incorrectly lists my 2nd entry as 2C 2T ;)

I blame Copy-Paste! :yepp:
Fixed.

Edit: 1000th post of the thread! :D
10-23-2010, 07:52 AM
0Ro!

4,5G done on air, ambient temp 23c

http://img19.imageshack.us/img19/5757/45gstable.th.jpg

batch #L938B402
10-23-2010, 04:01 PM
dr_dx

Gigabyte X58A-UD7rev2 4.65Ghz 100GFlops

4.65Ghz on above dew point water - Xeon W3680 Batch# 3013A739

My goal was to reach 100GFlops.

http://valid.canardpc.com/cache/banner/1445387.png

http://i176.photobucket.com/albums/w...x/465alinx.jpg

Here's a template:

Code:

GIGABYTE GA-X58A-UD7 rev2 MB Intelligent Tweaker(M.I.T.) > Advanced Frequency Settings [Press Enter] CPU Clock Ratio............................: 30 CPU Frequency ........................(GHz): 4.65 > Advanced CPU Core Features [Press Enter] Intel(R) Turbo Boost Tech..................: Disabled CPU Cores Enabled..........................: All CPU Multi Threading........................: Disabled CPU Enhanced Halt (C1E)....................: Disabled C3/C6/C7 State Support.....................: Disabled CPU Thermal Monitor........................: Disabled CPU EIST Function..........................: Disabled Bi-Directional PROCHOT.....................: Disabled QPI Clock Ratio............................: x36 QPI Link Speed........................(GHz): 5.58 Uncore Clock Ratio.........................: x21 Uncore Frequency......................(MHz): 3255 >>>>> Standard Clock Control Base Clock(BCLK) Control...................: Enabled BCLK Frequency(MHz)........................: 155 Extreme Memory Profile(X.M.P.).............: Disabled System Memory Multiplier (SPD).............: 12 Memory Frequency(MHz)......................: 1860 PCI Express Frequency(MHz).................: 100 >>>>> Advanced Clock Control CPU Clock Drive (mV).......................: 800 PCI Express Clock Drive (mV)...............: 900 CPU Clock Skew (ps)........................: 0 IOH Clock Skew (ps)........................: 0 > Advanced Memory Settings [Press Enter] Extreme Memory Profile(X.M.P.).............: Disabled System Memory Multiplier (SPD).............: 12 Memory Frequency(MHz)......................: 1860 Performance Enhance........................: Standard DRAM Timing Selectable (SPD)...............: Quick Profile DDR Voltage........................: 1.5 Profile QPI Voltage........................: 1.175 Channel Interleaving.......................: 6 Rank Interleaving..........................: 4 >>>>> Channel A, B, & C > Channel A, B, & C Timing Settings [Press Enter] >>>>> Channel A, B, & C Standard Timing Control Cas Latency Time...........................: 8 tRCD.......................................: 8 tRP........................................: 8 tRAS.......................................: 22 >>>>> Channel A, B, & C Advanced Timing Control tRC........................................: Auto tRRD ......................................: Auto tWTR ......................................: Auto tWR........................................: Auto tWTP.......................................: Auto tWL........................................: Auto tRFC.......................................: 80 tRTP.......................................: Auto tFAW.......................................: Auto Command Rate (CMD) ........................: 1 >>>>> Channel A, B, & C Misc Timing Control B2B CAS Delay..............................: - Round Trip Latency.........................: Auto > Channel A, B, & C Turnaround Setting [Press Enter] >>>>> Channel A, B, & C Reads Followed By Reads Different DIMMs............................: Auto Different Ranks............................: Auto On The Same Rank...........................: Auto >>>>> Channel A, B, & C Writes Followed By Writes Different DIMMs............................: Auto Different Ranks............................: Auto On The Same Rank...........................: Auto > Advanced Voltage Settings [Press Enter] >>> CPU LoadLine Calibration.......................: L2 CPU Vcore..................................: 1.5375 xDynamic Vcore(DVID).......................: 0 QPI/VTT Voltage............................: 1.415 CPU PLL....................................: 1.4 >>> MCH/ICH PCIE.......................................: Auto [1.5] QPI PLL....................................: Auto [1.1] IOH Core...................................: Normal [1.1] ICH I/O....................................: Auto [1.5] ICH Core...................................: Auto [1.1] >>> Dram DRAM Voltage...............................: 1.66 DRAM Termination...........................: .75 Ch-A Data VRef.............................: .75 Ch-B Data VRef.............................: .75 Ch-C Data VRef.............................: .75 Ch-A Address VRef..........................: .75 Ch-B Address VRef..........................: .75 Ch-C Address VRef..........................: .75 > Miscellaneous Settings [Press Enter] Isochronous Support........................: Enabled Virtualization Technology..................: Disabled GOOC 2010 WWF Rev.2 Settings Only GOOC Lean Mode.............................: On GOOC extreme clock.........................: Enabled GOOC extreme temp..........................: Disabled
10-24-2010, 06:43 AM
radaja

heres my newest cpu.it does 4502 w/1.32v in xp but win7 x64 required
a bump in vcore from 1.362v to 1.368v in bios.1.34v load is still awesome:D

i7-920 #3849B018
Gigabyte X58A-UD5
custom water w/AC

4.5GHz HT on 1.34v
http://valid.canardpc.com/show_oc.php?id=1446295

4502 HT on DDR3-1715 9-9-9-24 1t
20 run LinX 42m Prime95 Blend
http://i51.tinypic.com/t0t5yu.jpg
http://i54.tinypic.com/2lsbfaw.jpg
10-24-2010, 07:15 AM
zalbard

Good job, everyone! :up:
Congrats on your golden batch chip, radaja! Took you a while to get one, eh? :D
10-24-2010, 07:17 AM
kup

Where on earth did you find a batch like that?! :D I'd have thought they'd all be long gone by now...
10-24-2010, 08:36 AM
radaja

Quote:

Originally Posted by zalbard

Good job, everyone! :up:
Congrats on your golden batch chip, radaja! Took you a while to get one, eh? :D

Thanks
well this is my fourth golden 920,and ive been trying to match my first one ever since i sold it.
it was another 3849B018 and i sold it only after playing with it for about 2 weeks and i didnt know
much about i7's then.it was and still is the best one for low volts ive seen.this one is close but still not the same:D

Quote:

Originally Posted by kup

Where on earth did you find a batch like that?! :D I'd have thought they'd all be long gone by now...

i got it from someone at ocn who is also a great wellknown XS's member:up:
10-24-2010, 10:38 AM
angelreaper

Batch# 3013A652 Core i7 970. Cooling Thermalright Silver Arrow.

http://img839.imageshack.us/img839/8462/linx451000.jpg

http://img837.imageshack.us/img837/1...validate01.jpg
http://valid.canardpc.com/show_oc.php?id=1444923
http://img822.imageshack.us/img822/4...pi5ghz1000.jpg
http://img213.imageshack.us/img213/7...ench121000.jpg

Thermalright Silver Arrow and Intel I7 970 5ghz
10-24-2010, 11:10 AM
Church

5GHz on air?! That's nuts :D
10-24-2010, 11:51 AM
miahallen

Quote:

Originally Posted by angelreaper

Batch# 3013A652 Core i7 970. Cooling Thermalright Silver Arrow.

Nice :up:

WAY better than my 970 :(
10-24-2010, 12:26 PM
dr_dx

Zalbard.....my cpu is a W3680 and what do I have to do to get past The Nemisis?
10-24-2010, 04:07 PM
zalbard

Quote:

Originally Posted by dr_dx

Zalbard.....my cpu is a W3680 and what do I have to do to get past The Nemisis?

Fixed both... my bad. Will add the new submissions tomorrow once I am properly awake. :)
10-24-2010, 10:32 PM
dr_dx

Quote:

Originally Posted by zalbard

Fixed both... my bad. Will add the new submissions tomorrow once I am properly awake. :)

Thanks! And Thanks for taking great care of this thread!

Dr_DX
10-24-2010, 11:23 PM
dr_dx

Here's a look at Linx 100 GFlops @ 4.6Ghz

Trying to find the minimum proc speed while still hitting 100 GFlops stable in Linx.

http://i176.photobucket.com/albums/w...x100GFlops.jpg
10-25-2010, 01:14 PM
miahallen

Quote:

Originally Posted by dr_dx

Trying to find the minimum proc speed while still hitting 100 GFlops stable in Linx.

Hummm....are you running with the latest binaries (look in the OP)...I was trying to hit 100Gflops last night, and was a little short at 5GHz :confused:
10-25-2010, 04:33 PM
Dekara

My 1year old result :)

Dekara | C2D E8600 [2C] @ 4510MHz | 1.312 | DFI P45-T2RS Plus | Air | Q820A606

http://img8.imageshack.us/img8/6276/...1vlinxx.th.jpg
10-25-2010, 06:40 PM
dr_dx

Quote:

Originally Posted by miahallen

Hummm....are you running with the latest binaries (look in the OP)...I was trying to hit 100Gflops last night, and was a little short at 5GHz :confused:

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.
10-26-2010, 12:43 AM
C-N

Gigabyte GA-X58-UD3R Rev 2

Here's my entry....

Gigabyte GA-X58-UD3R Rev 2
Intel i7 950 FPO/Batch 3020A998
3 x 1GB OCZ Platinum PC3-12800 CL7
OCZ GameXStream1010W PSU
Prolimatech Megahalems RevB 1 x NMB-Mat 120mm Fan
2 x HD3870X2

http://i106.photobucket.com/albums/m...R1960CL81T.png
10-26-2010, 06:20 AM
SimpleTECH

Quote:

Originally Posted by dr_dx

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.

Replace linpack_xeon32 and xeon64 with those in this package (newer, 10.2.6.015).
10-26-2010, 07:35 AM
miahallen

Quote:

Originally Posted by dr_dx

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.

Weird....that's the same I was using :rofl:

Maybe because I was running single channel.....:shrug:

Oh well, nice work anyhow :yepp:
10-26-2010, 09:16 AM
dr_dx

Quote:

Originally Posted by miahallen

Weird....that's the same I was using :rofl:

Maybe because I was running single channel.....:shrug:

Oh well, nice work anyhow :yepp:

Speaking of nice work, I greatly appreciate your Gulftown guide - it was a tremendous help.:up::up:
10-26-2010, 11:41 AM
wiener007

Found a nice I7-950

wiener007 | Core i7 950 [4C 8T] @ 4519.7 MHz | 1.303 | Rampage III Extreme | Water | 3849B099

http://www.abload.de/thumb/4500-linxbfls.jpg
10-26-2010, 11:59 AM
DomagojX

wow, nice i7 950 :)
10-26-2010, 06:49 PM
miahallen

Quote:

Originally Posted by dr_dx

Speaking of nice work, I greatly appreciate your Gulftown guide - it was a tremendous help.:up::up:

Ah, good to hear :) You're welcome :up:
10-27-2010, 02:55 PM
nickless

Here is my 5-th "new" Xeon W3520 :D:
4C 8T
batch# - 3845A935@4567MHz
mobo - RIIIE
cooling - water: EK-Supreme HF, MCP355, Magicool Xtreme III
vcore @ 1.376V
http://img183.imageshack.us/img183/2...inx4567.th.jpg http://img51.imageshack.us/img51/958...x204567.th.jpg
10-27-2010, 07:43 PM
radaja

nickless,very nice:up:
thats the batch i wanted.hows the IMC on your cpu?
my new one is great at low vcore OC.s but seems to have
a crappy IMC.cant seem to run ddr3-2000:down:
10-27-2010, 10:12 PM
nickless

Tank's, your CPU is very nice too. I haven't tested yet, because I have it only from two days and the settings of the mobo now are completely different compare to previous CPU. First aim was Intel 4.5GHz LinX Stable Club :D. Now come the other tests :).
10-28-2010, 04:40 AM
PolRoger

Quote:

Originally Posted by C-N

Here's my entry....

Gigabyte GA-X58-UD3R Rev 2
Intel i7 950 FPO/Batch 3020A998
3 x 1GB OCZ Platinum PC3-12800 CL7
OCZ GameXStream1010W PSU
Prolimatech Megahalems RevB 1 x NMB-Mat 120mm Fan
2 x HD3870X2

http://i106.photobucket.com/albums/m...R1960CL81T.png

First recent batch #30XX... i7 950 I've seen in the LinX 4.5 GHZ club (on air too.) :up:

Quote:

Originally Posted by wiener007

Found a nice I7-950

wiener007 | Core i7 950 [4C 4T] @ 4519.7 MHz | 1.303 | Rampage III Extreme | Water | 3849B099

http://www.abload.de/thumb/4500-linxbfls.jpg

Very nice early batch 3849Bxxx i7 950... I think that is one of the lowest bloomfield vcore (u/water) I've seen for 4.5GHz. :up:

I noticed that the link states 4C/4T but the screenshot shows 4C/8T.
10-29-2010, 12:26 AM
C-N

Quote:

Originally Posted by PolRoger

First recent batch #30XX... i7 950 I've seen in the LinX 4.5 GHZ club (on air too.) :up:

Thanks, Its my 1st X58/i7 build moving on from the DFI P45 & I'm having a lot of fun with it.
.
10-29-2010, 01:05 AM
zalbard

The OP should be up to date! :up:
Welcome to the new members! :)
10-29-2010, 03:13 AM
wiener007

Quote:

Originally Posted by PolRoger

First recent batch #30XX... i7 950 I've seen in the LinX 4.5 GHZ club (on air too.) :up:

Very nice early batch 3849Bxxx i7 950... I think that is one of the lowest bloomfield vcore (u/water) I've seen for 4.5GHz. :up:

I noticed that the link states 4C/4T but the screenshot shows 4C/8T.

Thanks PolRoger, you are correct.
10-29-2010, 05:24 AM
CryptiK

Wiener that is epic vcore. Congrats on that CPU.
10-29-2010, 12:07 PM
OLDcomer

@zalbard:

Please set this label to my previous submission:
OLDcomer | C2Q Q9650 [4C] @ 4499.9MHz | 1.456 | ASUS P5E X38 rev. 1.03@Rampage Formula | Water | L826B006

And here is my new submission with the same CPU and cooling but different board:

OLDcomer | C2Q Q9650 [4C] @ 4499.9MHz | 1.408 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | L826B006

http://img696.imageshack.us/img696/3...08vlinx.th.png

And it's time for the first E5200 submission in this thread:

OLDcomer | C2D E5200 [2C] @ 4500.1MHz | 1.504 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | Q831B293

http://img819.imageshack.us/img819/7...vloadli.th.jpg
10-29-2010, 04:27 PM
wiener007

Thanks Cryptik,
I tried some chips before i found that Batch.

Moved to the Gulftown world today.
4812 MHz, i think that chip is also not so bad.

wiener007 | Core I7 970 [6C 12T] @ 4812.9 | 1.515 | Rampage III Extreme | Water | 3009F989

http://www.abload.de/thumb/i7-970-48127nsp.jpg
10-30-2010, 01:35 AM
Krautmaster

http://www.abload.de/thumb/linx46006cls.jpg

Krautmaster | Core i7 990X ES | 6C 12T |4600,0 | 1,440 | DFI UT X58 | Water | -
10-30-2010, 04:03 AM
miahallen

Both of these ^^^ :eek:
10-30-2010, 06:20 AM
jcool

I may not be able to pass LinX at 4.5Ghz with both CPUs (unfortunately, my 2nd CPU is a bit of a dog - 1st one can do 4,5 @ 1,38V) but I can still own you guys via Gflop rating :wasntme:

By the way, I still get higher Gflops rating AND CPU core temps when running only 12 threads (despite having HT on). I am using the latest linpack libraries.
Is this still the case for single socket Hexas? Or do you get higher temps by running on all Threads there? Thanks :)
10-30-2010, 12:25 PM
godzzila

Quote:

Originally Posted by jcool

I may not be able to pass LinX at 4.5Ghz with both CPUs (unfortunately, my 2nd CPU is a bit of a dog - 1st one can do 4,5 @ 1,38V) but I can still own you guys via Gflop rating :wasntme:

By the way, I still get higher Gflops rating AND CPU core temps when running only 12 threads (despite having HT on). I am using the latest linpack libraries.
Is this still the case for single socket Hexas? Or do you get higher temps by running on all Threads there? Thanks :)

Yes GFLOPS is because memory :), isn't it? or two CPUs, but still 12 threads in LinX.
But niceee 4.5G 1.38V :D
10-30-2010, 04:40 PM
dr_dx

Quote:

Originally Posted by jcool

I may not be able to pass LinX at 4.5Ghz with both CPUs (unfortunately, my 2nd CPU is a bit of a dog - 1st one can do 4,5 @ 1,38V) but I can still own you guys via Gflop rating :wasntme:

By the way, I still get higher Gflops rating AND CPU core temps when running only 12 threads (despite having HT on). I am using the latest linpack libraries.
Is this still the case for single socket Hexas? Or do you get higher temps by running on all Threads there? Thanks :)

I get higher temps and lower performance with HT on.

http://i176.photobucket.com/albums/w...1009GFlops.jpg
11-03-2010, 08:21 AM
owikh84

owikh84 | Core i7 980X [6C 6T] @ 4514.0MHz | 1.399 | EVGA Classified E760 | Water | 3041A489
http://img203.imageshack.us/img203/7581/45535556.jpg
11-04-2010, 11:53 AM
Bigchrome

Hi guys, been out of the overclocking game for a while now and I'm working at getting my e8600 stable at 4.5 again. For some reason it doesn't seem to do it at the same settings I used to have (If my memory serves me well). I've gotten to 20+ mins in linx before I manually stop it now but I'm getting worrying temps, 80c at 4.5Ghz, 1.4v with watercooling. Is this normal or should I be concerned? I never remember it running this hot :shrug:
11-18-2010, 03:57 PM
C-N

Dfi lp ut x58-t3e8h

DFI X58 Still got it!!!

DFI LP UT X58-T3E8H
Intel i7 930 FPO/Batch 3951A722
3 x 1GB OCZ Platinum PC3-12800 CL7
OCZ GameXStream1010W PSU
Prolimatech Megahalems RevB 1 x NMB-Mat 120mm Fan
1 x HD3870X2
Windows 7 64 - Bit

Half Way

http://i106.photobucket.com/albums/m...TOnHalfWay.png

20 X Done

http://i106.photobucket.com/albums/m...8CL8EISTOn.png

This chip makes 4.5GHz with 1.408 CPU-Z volts on my Giga x58 but runs about 80oC!!! on a cold day...

.
11-18-2010, 04:59 PM
zalbard

Very nice, C-N! Good job! :up:
Is that really 1.5V on air?
Btw, I'll be away for the weekend, expect me to update the OP on Monday. :)
11-18-2010, 05:19 PM
radaja

Quote:

Originally Posted by C-N

DFI X58 Still got it!!!
This chip makes 4.5GHz with 1.408 CPU-Z volts on my Giga x58 but runs about 80oC!!! on a cold day...

i noticed my gigabytes run with less vcore than my E760 and my old dfi x58 too.
and on 775 it seems asus maxII and REX needed more vcore than my UD3R

great OC C-N:up:
11-18-2010, 07:49 PM
SimpleTECH

zalbard, can you update the LinX link? Intel updated their Linpack library (10.3.0.003).

http://www.mediafire.com/?zuax5c5rhd8j6wm

Thanks!
11-19-2010, 05:13 AM
the_real_7

4.5 late bloomer

4.5 late bloomer :rolleyes:

Hey better late than never :up:
Got my I7 920 @ to 4515 . . . HT off at 7 7 7 20 rock solid stable . . .
will continue to tweak a bit over next few weeks

http://i84.photobucket.com/albums/k7...ettings920.jpg
11-19-2010, 07:23 AM
C-N

Quote:

Originally Posted by zalbard

Very nice, C-N! Good job! :up:
Is that really 1.5V on air?
Btw, I'll be away for the weekend, expect me to update the OP on Monday. :)

Yup 1.5v on air :D

Have a great weekend.

Quote:

Originally Posted by radaja

i noticed my gigabytes run with less vcore than my E760 and my old dfi x58 too.
and on 775 it seems asus maxII and REX needed more vcore than my UD3R

great OC C-N:up:

My Giga runs with way less core but far more heat, I was going to mention this on the Giga thread but it appears to me the Giga pumps a lot of current into the chip to keep the vcore down where as this DFI doesnt hence needing more vcore. This same chip came out of my Giga with light brown scorch marks on the under side of the chip!!!! I would suggest anyone running 4.5GHz on the Giga check there chips before its to late!!!

Update... I also have a 950 that run high speed in the Giga & it also has some marks but not quite as large as the 930 see pic.

.
11-19-2010, 08:47 AM
the_real_7

Quote:

My Giga runs with way less core but far more heat, I was going to mention this on the Giga thread but it appears to me the Giga pumps a lot of current into the chip to keep the vcore down where as this DFI doesnt hence needing more vcore. This same chip came out of my Giga with light brown scorch marks on the under side of the chip!!!! I would suggest anyone running 4.5GHz on the Giga check there chips before its to late!!!

Update... I also have a 950 that run high speed in the Giga & it also has some marks but not quite as large as the 930 see pic.

wow those burn marks are scary , what giga where you running with what voltage the Gigabyte GA-X58A-UD3R ?
11-19-2010, 09:20 AM
C-N

Quote:

Originally Posted by the_real_7

wow those burn marks are scary , what giga where you running with what voltage the Gigabyte GA-X58A-UD3R ?

This one & another 950 @ 1.425 CPU-Z vcore

http://www.xtremesystems.org/forums/...postcount=1018

.
11-19-2010, 01:59 PM
radaja

Quote:

Originally Posted by the_real_7

4.5 late bloomer :rolleyes:

Hey better late than never :up:
Got my I7 920 @ to 4515 . . . HT off at 7 7 7 20 rock solid stable . . .
will continue to tweak a bit over next few weeks

congratulations,your in the club:up:
good luck with the tweaking and have fun:D

Quote:

Originally Posted by C-N

Yup 1.5v on air :D

Have a great weekend.

My Giga runs with way less core but far more heat, I was going to mention this on the Giga thread but it appears to me the Giga pumps a lot of current into the chip to keep the vcore down where as this DFI doesnt hence needing more vcore. This same chip came out of my Giga with light brown scorch marks on the under side of the chip!!!! I would suggest anyone running 4.5GHz on the Giga check there chips before its to late!!!

Update... I also have a 950 that run high speed in the Giga & it also has some marks but not quite as large as the 930 see pic.

.

i heard they had vtt issues with the first x58's,but this vcore and power thing is scary,thanks for the headsup:D
11-19-2010, 02:31 PM
C-N

Quote:

Originally Posted by radaja

i heard they had vtt issues with the first x58's,but this vcore and power thing is scary,thanks for the headsup:D

Dont get me wrong the Giga is a great board especially at the price & used about 4~4.2GHz im sure it'll run forever but that scorching aint good. My Giga is a v2 maybe it has a later x58 i dont know maybe its a v2 thing. I heard the vtt droops bad on the Giga havent tested it but the DFI runs way less vtt for way more uncore.

.
11-19-2010, 05:42 PM
QuadDamage

I've ran my D0's at 4.4Ghz at 1.425V and 4.5Ghz and 1.50V 24/7 on two Giga boards, UD4P and UD7 for quite a long time and i've never seen any scorch marks on any of my chips. You sure it's a scorch mark and not some oily stuff ie thermal paste or somethin?
11-19-2010, 05:59 PM
C-N

Quote:

Originally Posted by QuadDamage

I've ran my D0's at 4.4Ghz at 1.425V and 4.5Ghz and 1.50V 24/7 on two Giga boards, UD4P and UD7 for quite a long time and i've never seen any scorch marks on any of my chips. You sure it's a scorch mark and not some oily stuff ie thermal paste or somethin?

I'm sure & its on 3 chips 2 look like the picture & one looks 3 times as bad but still works great. The board is a UD3 V2 BTW.

.
11-20-2010, 12:21 AM
the_real_7

Quote:

congratulations,your in the club
good luck with the tweaking and have fun

Thanks Radaja . .nice to be here " wow " wheres the champagne room lol . . . ok now you Sergio and OC nub gotta stop forcing me to push my machine to these crazy levels of the overlock lmao :woot:
11-20-2010, 02:41 AM
Chri$ch

only a short test.... :wasntme: :D

http://www.abload.de/img/linx-5ghz-osmtdq8m.png
11-20-2010, 03:03 AM
QuadDamage

What's the vcore needed for that Sandy to do five gees with HT on? Heat doesn't seem to be limiting factor from what i can see.

C_N,

I see, that sucks man be careful :D
11-20-2010, 03:07 AM
Chri$ch

with SMT on +0,03v :)

btw cooled with water @ ~20°C room temp.
11-20-2010, 06:29 AM
Bigchrome

Wow that sandybridge is nice! Why blur the bclk and then include the ram speed and ram mulitplier though? I mean assuming it's reporting correctly we can see it's 133 :P Can't wait to get one of those.
11-20-2010, 06:58 AM
Chri$ch

and 133 is wrong :D
11-20-2010, 07:21 AM
ChaosAD

Whats the max at 1.4v with 4c/8t?
11-20-2010, 10:51 AM
xdave

My first attempt, temp were too high for me, think i can get the vcore down.
http://img52.imageshack.us/img52/454...linxstable.png

Uploaded with ImageShack.us
11-20-2010, 11:41 AM
the_real_7

Quote:

Originally Posted by xdave

My first attempt, temp were too high for me, think i can get the vcore down.
http://img52.imageshack.us/img52/454...linxstable.png

Uploaded with ImageShack.us

looks great to me low vcore and voltages :up:
lowest i can go is 1.456 and i still run high 60S
11-21-2010, 01:24 AM
sin0822

as far as gigabyte pushing more current goes, dynamic current step is 100 amps from 45 to 1.45 just fro the cores, then you have 35 more amps for uncore, well that comes to a whopping 180 amps, after the dynamic current step the voltage droops, these numbers are from VRD 11.1 spec which define vdroop and well it explains how lower voltage and higher current is how these chips were designed. Of course gigabyte probably runs out of spec, right... I have never seen those marks on my cpus nor anyone else.
11-21-2010, 10:15 AM
C-N

Quote:

Originally Posted by sin0822

as far as gigabyte pushing more current goes, dynamic current step is 100 amps from 45 to 1.45 just fro the cores, then you have 35 more amps for uncore, well that comes to a whopping 180 amps, after the dynamic current step the voltage droops, these numbers are from VRD 11.1 spec which define vdroop and well it explains how lower voltage and higher current is how these chips were designed. Of course gigabyte probably runs out of spec, right... I have never seen those marks on my cpus nor anyone else.

I'm still trying to get to the bottom of my issue & at the moment im leaning towards PSU rather than board. I just noticed yesterday that the 12v line is running 13v so maybe this is compounding the situation on the Giga.

Its just strange that I have run lots of chips on lots of boards with the same PSU & the only board that marks the chips is the UD3 Rev 2.

.
11-21-2010, 10:47 AM
Leeghoofd

Quote:

Originally Posted by Bigchrome

Wow that sandybridge is nice! Why blur the bclk and then include the ram speed and ram mulitplier though? I mean assuming it's reporting correctly we can see it's 133 :P Can't wait to get one of those.

aim way lower :up:, was your sample also limited to 50X multi Chrisch ?
11-21-2010, 01:04 PM
some_one

[QUOTE=Chri$ch;4635098]only a short test.... :wasntme: :D

Chri$ch, are you running the latest Linpack 10.3? Seems your running on just SSE no AVX. Would hope to see 130GFlops with that setup at 5GHz.
11-21-2010, 01:44 PM
zalbard

Quote:

Originally Posted by some_one

Chri$ch, are you running the latest Linpack 10.3? Seems your running on just SSE no AVX. Would hope to see 130GFlops with that setup at 5GHz.

OT: I've just updated the distributive of LinX with the updated libraries (10.2.6.015 -> 10.3.0.003) in the OP. :up:
11-23-2010, 01:56 AM
Chri$ch

Quote:

Originally Posted by ChaosAD

Whats the max at 1.4v with 4c/8t?

4.9GHz @ 1.384v with 4C/8T

Quote:

Originally Posted by Leeghoofd

aim way lower :up:, was your sample also limited to 50X multi Chrisch ?

no, not limited to x50 ;)

but i wait now for D-2 samples :)
11-23-2010, 02:36 AM
ChaosAD

Quote:

Originally Posted by Chri$ch

4.9GHz @ 1.384v with 4C/8T

Ok that is sick, send me your chip plz :yepp: :D
11-23-2010, 11:09 AM
xdave

update, changed airflow in system and got vcore slightly down, temps are way improved
http://img207.imageshack.us/img207/7187/78371713.png

Uploaded with ImageShack.us
11-23-2010, 02:37 PM
deachus

Quote:

Originally Posted by xdave

update, changed airflow in system and got vcore slightly down, temps are way improved
http://img207.imageshack.us/img207/7187/78371713.png

Uploaded with ImageShack.us

Can you please post a CPUZ memory tab for that run? What type of memory are you running?

Thanks
11-23-2010, 03:00 PM
xdave

http://img695.imageshack.us/img695/9103/95754370.png

Uploaded with ImageShack.us
These are the setting i used for the test, im using corsair dom GTs 2000mhz 8-9-8-24, its running at around 1720 mhz, possibly could get it to run at 2150 if i bump up the qpi and ram voltage
11-23-2010, 06:26 PM
miahallen

Wow....excellent CPU xdave.....what batch?
11-23-2010, 07:15 PM
Alka Holic

Ok, I just completed a Linx run (20) with updated Linpack libraries dated:
Monday September 27, 2010. The Gflops went down compared to IBT. Disregard the clockspeed and multiplier becaues I have C States and Speedstep enabled. The actual clockspeed is 158.51 x 29 = 4596.96 ghz. I am going to try lowering the multiplier and use a higher blck.

MB: Rampage 3 Extreme 1102 bios

Voltages:

CPU Load Line Calibration set to Auto
QPI Load Line Calibration disabled

Vcore: 1.34375 actual reading 1.336 with ROG
CPU PLL: Auto actual reading 1.812 with ROG
VTT: Auto actual reading 1.330 with ROG
DRAM: 1.64 actual reading 1.641 with ROG

http://img338.imageshack.us/img338/2...un11232010.png
11-23-2010, 11:49 PM
nickless

Quote:

Originally Posted by xdave

update, changed airflow in system and got vcore slightly down, temps are way improved
...

Wow, how did you get 66GFlops :eek:. I'm with similar settings but at 21*217 have only 59GFlops :(
11-24-2010, 12:07 AM
[XC] Oj101

It's 50x100MHz on the SB, why'd you blur it? :D
11-24-2010, 12:23 AM
OLDcomer

Quote:

Originally Posted by nickless

Wow, how did you get 66GFlops :eek:. I'm with similar settings but at 21*217 have only 59GFlops :(

HT lowers GFlops.
11-24-2010, 12:28 AM
nickless

I've missed this thing :hitself:.
Thank's.
11-24-2010, 05:51 AM
Alka Holic

Can I join the club? All other voltages are exactly the same as previously posted. The processor was bought at Microcenter in Bethesda Maryland. I think they have 4 or 5 left. I am not sure if they are they same batch and pack date.

During run:

http://img152.imageshack.us/img152/7732/vcard.png

http://img811.imageshack.us/img811/3738/linxfinal1.png

After run:

http://img146.imageshack.us/img146/3751/linxfinal2.png
11-24-2010, 10:18 AM
xdave

Quote:

Originally Posted by miahallen

Wow....excellent CPU xdave.....what batch?

not sure, will try and find out within the next few days
11-24-2010, 12:59 PM
xdave

another update, got the vcore down to 1.375 in BIOS
11-24-2010, 12:59 PM
xdave

http://img340.imageshack.us/img340/6905/95422841.png

Uploaded with ImageShack.us
11-24-2010, 03:17 PM
xdave

and again, got it as low as 1.343v
http://img217.imageshack.us/img217/3485/1234pv.png
11-24-2010, 03:27 PM
Church

You should learn 'clone' spell to quickly get rich by selling such cpu-s :)
11-24-2010, 03:55 PM
xdave

must be quite a decent cpu to be at 4.5ghz with only 1.34vcore (accepting offers) :P
11-24-2010, 04:48 PM
andressergio

Well this is my first I7 920 a very nice and cool chip

can i join the club ? :D

http://img840.imageshack.us/img840/1...inxrunning.png

http://img230.imageshack.us/img230/8...linxpassed.png

cheers :toast:
Sergio
11-24-2010, 05:06 PM
the_real_7

congrats homie :up:

See that push in your Vcore Vtt Qpi ioh core , sometimeits take a notch but looks great :up: . . . no more hiccups from this road on Sergio :up:
11-24-2010, 05:14 PM
andressergio

Quote:

Originally Posted by the_real_7

congrats homie :up:

See that push in your Vcore Vtt Qpi ioh core , sometimeits take a notch but looks great :up: . . . no more hiccups from this road on Sergio :up:

thanks mate passed on the first time :D
11-24-2010, 05:18 PM
NoGuru

Kickin but as usual Serg!
11-24-2010, 05:24 PM
andressergio

Quote:

Originally Posted by NoGuru

Kickin but as usual Serg!

thanks Trace :up:
11-24-2010, 07:26 PM
vodka3dg

congrats serg! will try with my xeon :D
11-25-2010, 04:27 AM
andressergio

Quote:

Originally Posted by vodka3dg

congrats serg! will try with my xeon :D

thanks bud you are on water so its a must now :up:
11-25-2010, 05:32 AM
Dahaka

Great run Sergio, congrats :D.

When the WC arrives i will try some linX runs with and without HT.

Regards.

PD: for the moment the 950 it's fine, 4GHz with HT on and 1.22v under load, 1.25v on idle (Crapy MSI X58-65).
11-25-2010, 06:37 AM
OC Nub

Nice job everyone!! Glad to see this thread is still going strong.

Congrats Sergio, good to see you pass 20. :up:
11-25-2010, 06:47 AM
andressergio

Quote:

Originally Posted by TOOL_CHILE

Great run Sergio, congrats :D.

When the WC arrives i will try some linX runs with and without HT.

Regards.

PD: for the moment the 950 it's fine, 4GHz with HT on and 1.22v under load, 1.25v on idle (Crapy MSI X58-65).

Quote:

Originally Posted by OC Nub

Nice job everyone!! Glad to see this thread is still going strong.

Congrats Sergio, good to see you pass 20. :up:

thanks buds i wanted so much to peace my mind doing this :D

cheers to all :toast:
Sergio
11-25-2010, 03:54 PM
xdave

so i have found my lowest possible vcore for 4.5GHz, any lower and i get a BSOD 0x00000124, which apparently means QPI voltage too high or too low but im happy with 1.31875v
http://img10.imageshack.us/img10/4268/123456dt.png

Uploaded with ImageShack.us
11-25-2010, 04:11 PM
OC Nub

@xdave, Very nice 920 :up:.
What was load vcore, looks like you are using LLC 100%.
11-25-2010, 04:49 PM
xdave

didnt check load on vcore, but since i had a hard lock on cod4 so i bumped the vcore upto 1.3250v and now everything is ok, yes LLC is 100%
11-25-2010, 04:51 PM
andressergio

Quote:

Originally Posted by xdave

so i have found my lowest possible vcore for 4.5GHz, any lower and i get a BSOD 0x00000124, which apparently means QPI voltage too high or too low but im happy with 1.31875v
http://img10.imageshack.us/img10/4268/123456dt.png

Uploaded with ImageShack.us

very nice mate !!!

i also had that BSOD code lol passed linx 20 loops of ALL mem and playing BC2 gave me that damn
11-26-2010, 02:16 AM
SimpleTECH

SimpleTECH | Xeon W3520 [4C 8T] @ 4619.7MHz | 1.440 | Gigabyte X58A-UD5 | Water | 3845A935

http://img696.imageshack.us/img696/9...201440vf7d.jpg

Even with two quads, this chip still runs hot. Need to get some extreme cooling or wait for it to get colder in my basement.

Show 100 post(s) from this thread on one page