agreed! :woot:Quote:
Originally Posted by HARDCORECLOCKER
Printable View
agreed! :woot:Quote:
Originally Posted by HARDCORECLOCKER
Pretty much we already do take a look at my first post in the thread below every bios is what they have changed what slots to run them in and what ram they work well with...
Dragon
Im running a dagf board right now while my ultra-d is being rma'd..Quote:
Originally Posted by ahpaul82
My dagf board runs awsome with the 4-14-05 bios on DFI's site.. Currently running my Sandy @ 260x11..
Awsome little budget mobo..hehe.. :D
I get BSOD when installing Windows...I'm gonna try installing a copy with SP2 (cd from work today).
The board from Fry's has no label on the last PCI slot so I don't know the revision, nor does the stock BIOS have Memtest. I tried to flash to 414-3 using the bootable CD-ROM but it always says "Device Not Ready". What is wrong?
someone else has that same problem atm here, still troubleshooting, will let u know what happens.... I'm suspecting the board atm.Quote:
Originally Posted by Jomiy
How can I check what BIOS version I am running? I hope I am running 310 since I have a Venice on the board....
advanced bios -> disable logo (all the way on the bottom) -> save -> during POST look on the lower left hand side of the screen.Quote:
Originally Posted by Jomiy
or try Everest Home - free at www.lavalys.com
listedmany places but try Computer/Overclock/bios
Well I finally got to install Windows. Had 1/25 BIOS and it might have been conflicting with Venice. Flashed to 310 with a floppy (boot cd wouldn't flash). Windows install still BSOD, but I upped RAM voltage from 2.6 to 2.8 and it let me install. hurray!
Which is the best bios for some ocz eb? I didnt see one there and was wondering.
Hey guys...what are we reckoning about the new 06/15 BIOS. Apparently all the tweaking has to be re-learned all over again :(
Anyway, its here to download in English
refreshed cdrom image with 615 and replaced 8.59 awdflash w./ 8.6.
refreshed cdrom image with 618.
I flashed my Bios from 331-1 to 615 yesterday. Miraccle!!!. It solved my cold boot issues. But it affectes my oc. On 331-1 I could oc to 260Mhz @ 2-2-2-2 at 3.6vdimm stable. But now I could not do 260Mhz at the same settings. Bios 615 is quite picky on the RAM timing. I have to lower the CL to 2.5 in order to get my comp stable occasionally. I said occasionally becoz, at 260Mhz @ 2.5-2-2-2, my windows might hang during application such as 3DMark 2001 SE or Prime95 or during gaming such as Far Cry. Well! there is a lost and a gain for my case. But it is better than 'living with Cold Boot'. As for USB Problem, I did not encounter as I am on Ps/2 mouse and keyboard. Will try some tweaking and bencies tonight to make my tight timing to gain its stablility. Hmmm...this proof that my icute (PSU) is not the problem althought it has only 20pin
My sig
-----------------
Winnie 3000+@ 2340Mhz @ 1.52vcore(Stock cool)
DFI NF4 Ultra-D (Bios 615) Rev. A3
TwinMos SP UTT 256mb x2 (PC3200) @ 2.5-2-2-2 @ 3.6vdimm
IDE Hitachi 80gb 7200rpm 2 mb
Gigabyte 6600GT 500/1000
LG DVD Rom
Gigabyte CD ROM
Panasonic Floopy
icute 420watt PSU
Furry muff, but DFI's HATE 20pin connectors any rate, so I would just get a 24pin PSU and comply with the specs :)Quote:
Originally Posted by longsiew
Can't wait for payday and my PCP&C 5109 SLi!! :woot:
firedragon, please append the below lines, right below the ISO BIOS Pack download:
For users recieving 'Disk Not Ready' when trying to flash with the above ISO:
310+510-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_510-mini.rar
310+618-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_618-mini.rar
refreshed main cdrom iso image with 623-1/-2/-3 and compiled a '-mini' consisting of 310+623-1/-2/-3
310+623-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_623-mini.rar
refreshed cdrom ISO w./ 510-1/-2/-3 Tune Up and compiled a -mini.
310+510-1f/-2f/-3f:
http://indabasement.com/DFINF4/bios/310_510f-mini.rar
Just got my board, had 1.25 on it, flashed to 623 Rev 3 with the mini (having the "Disk Not Ready" error with full iso) and every thing seems to be working great now, even put a halt to my reboot issue. Thanks for posting this up.
refreshed cdrom image with 702-1/-2/-3 and compiled a -mini.
**THIS IS ALPHA.** USE AT YOUR OWN RISK! Please peruse the Discussion/Feedback link first if in doubt/for more info.
Discussion/Feedback Thread (702):
http://www.xtremesystems.org/forums/...ad.php?t=67540
Bootable CDROM (ISO) DOS Image w./ All Bios Revisions to Date (7/02/05):
http://indabasement.com/DFINF4/bios/DFI_BIOSROM.rar
310+702-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_702-mini.rar
Added the new 7.02 bios's on www.dfi-bios.tk now.
refreshed cdrom image w./ merlin's 510-2f (Tune Up) w./ hellfire's 3.16.
refreshed cdrom image w./ merlin's 0307 & 704 & compiled a -mini
310+704-1/-2/-3:
http://indabasement.com/DFINF4/bios/310_704-mini.rar
pershoot - per Oskar's request, please remove the 704 BIOS bro...
Thread here
Oskar's post
Peace :toast:
added to -mini 704 and full ISO:
echo MAJOR BUG IN 704 (Vcore Special 123%+ May Cause CPU Failure/Death In Certain Situations):
echo http://www.dfi-street.com/forum/showthread.php?t=16500