Intel 4.5GHz & 5GHz LinX Stable Club

Printable View

Show 100 post(s) from this thread on one page

03-08-2010, 04:12 PM
zalbard

Quote:

Originally Posted by dejanh

Done about 10 days ago quickly...

CPU: Core i7 920 D0, #3849A832, 4650.5MHz (222MHz x 21, 221.5MHz actual), With Vdroop, 1.611V idle, 1.541V load, HyperThreading On, 3987MHz Uncore, 42C idle, 89C load
DRAM: Mushkin Ascent Redline 6GB 6-7-6-18-59-1T 1600MHz kit at 1772MHz, 7-8-7-18-59-1T, DRAM Ratio sub-timings, 1.67V
MOBO: EVGA X58 Classified E759 with EK FC block
GPU: MSI R5850 OC at 1.225V/1000MHz/1250MHz
COOLING: Water with a single HW Labs BI GTX360 cooling CPU, motherboard, and GPU(s), 23C ambient

Fantastic! :D
Should I update your existing entry in the OP, or would you like me to add one more?
03-08-2010, 04:31 PM
Movieman

Quote:

Originally Posted by totalz

Learn to not brag on the forums before you actually did something.
I never tried to have 4,5HT ON, and like I said before: 4,6 HT ON ON AIR is almost impossible. And you were the one claiming you've got that cpu capable of doing it. You failed m8, since I can't see 4600mhz ht on in the pictures.

Actually you don't want me to upload screenshots of an i7 doing 4,8GHz HT ON linx stable that my friend was running on SS. So better don't say "maybe 1 day you will". Instead of that upload your 4,6ghz ht on mr. fail.

Quote:

Originally Posted by zsamz_

before you have another brainfart
i never stated i used ht
that was first time i even completed passes linx on ht
so dont start puttin words in my mouth and drop the crackpipe

and if i wanted to do 4.6 with ht i can all i need is proper coolin cause i know the cpu can do it

maybe i should ask god to gimme his linx pass @ 6.0 :rofl:

Ok gentlemen..Lets take a deep breath and remember to treat all as friends ok?
Thanks for listening
03-08-2010, 04:38 PM
OC Nub

zsams: Nice LinX runs, very hard to do with air cooling.:up::up:
03-08-2010, 11:12 PM
dejanh

Quote:

Originally Posted by zalbard

Fantastic! :D
Should I update your existing entry in the OP, or would you like me to add one more?

Update existing I guess :shrug: :D

Edit: Nice, #2 with HT On hahahaha, behind the phase guy :D
03-09-2010, 11:18 AM
newhit

Hope I'm in.

I still cannot figure out what LinX does or what is the absolute correct test but I hope this is close enough........... Be gentle;).

http://img291.imageshack.us/img291/7591/capture5.th.png
http://img412.imageshack.us/img412/3...c10936b.th.jpg
http://img535.imageshack.us/img535/2...ture3me.th.png
03-09-2010, 11:30 AM
zalbard

Quote:

Originally Posted by newhit

I still cannot figure out what LinX does or what is the absolute correct test but I hope this is close enough........... Be gentle;)

You got it all right, mate. :up:
Welcome to the club! :D
Really nice low vCore btw. :yepp:
03-09-2010, 12:15 PM
ChaosAD

newhit very nice cpu there. And nice temps also. But isnt 50gflops a little low for 4,6Ghz? :shrug: I get 57+ at 4,4.
03-09-2010, 03:01 PM
tool_462

Quote:

Originally Posted by ChaosAD

newhit very nice cpu there. And nice temps also. But isnt 50gflops a little low for 4,6Ghz? :shrug: I get 57+ at 4,4.

Very low, that is what I was thinking.

Started it up, been Folding ExtraLarge WU's for a few days so shouldn't have any issues passing LinX. I'll post when it finishes (if I remember to do it today :p:)

http://i136.photobucket.com/albums/q...462/45linx.png
03-09-2010, 11:23 PM
newhit

Quote:

Originally Posted by ChaosAD

newhit very nice cpu there. And nice temps also. But isnt 50gflops a little low for 4,6Ghz? :shrug: I get 57+ at 4,4.

Apologies, but I wouldn't know what a high value is or what the problem is or if there is one. I just pressed the required buttons and waited. If there is another test required just let me know.
:up:

These are my settings. Maybe the answer is there (low bclk?, QPI?)

http://www.xtremesystems.org/forums/...&postcount=790
03-10-2010, 02:35 AM
PiLsY

GFlops is very sensitive to memory timings. That looks about right for 8-9-8 or slower @ 1600mhz (or maybe 11/12 @ 2000mhz). I'm guessing you have some auto memory timings :). Check the memory tab on cpuz (or download cpu tweaker for more detailed readings) to see what your timings are at. Linx is much like SuperPi in terms of tweaking memory - higher memory performance can overcome cpu speed in terms of GFlops.

Can we post i3's here? I only ask as its a bit easy to get 4.5ghz on them - wonder if we need a 5ghz club for 32nm? Seen a fair few 6xx series at 5ghz even on air. A good 5xx series seems to top out at about 4.7-4.8ghz. Mine struggles past 4.5 and needs loads of voltage - guess that makes it about average?
03-10-2010, 04:34 AM
zalbard

Quote:

Originally Posted by PiLsY

Can we post i3's here? I only ask as its a bit easy to get 4.5ghz on them - wonder if we need a 5ghz club for 32nm? Seen a fair few 6xx series at 5ghz even on air. A good 5xx series seems to top out at about 4.7-4.8ghz. Mine struggles past 4.5 and needs loads of voltage - guess that makes it about average?

Anything that's made by Intel, mate.
03-11-2010, 04:46 AM
CryptiK

Any chance we can get the i7 list divided into 'HT on' and 'HT off' groups, since there is a significant difference in the difficulty of one vs the other?

Here's my submission.

Ci7 920 | HT On | 1.320v | 1.290 Vtt | Watercooled

Running 20th loop:

http://i720.photobucket.com/albums/w...20vrunning.jpg

Finished:

http://i720.photobucket.com/albums/w...0vfinished.jpg
03-11-2010, 08:29 AM
MrDucky

Verry nice CPU :O i wan't one of those :P
03-11-2010, 12:39 PM
zalbard

Quote:

Originally Posted by CryptiK

Any chance we can get the i7 list divided into 'HT on' and 'HT off' groups, since there is a significant difference in the difficulty of one vs the other?

I don't think there is much point, is there? Would be splitting the list in waaay too many small parts... I'd have to do the same for Gulftown, i3, etc...
I could also add whether HT is on or off to each submission (in bold) as an option.
What do you guys think? Shall I bother doing either?
03-11-2010, 01:43 PM
radaja

CryptiK,thats an awesome OC using such low vcore.
man i wish i had a chip like that to play with:D
03-11-2010, 05:28 PM
CryptiK

Quote:

Originally Posted by MrDucky

Verry nice CPU :O i wan't one of those :P

Thanks.

Quote:

Originally Posted by zalbard

I don't think there is much point, is there? Would be splitting the list in waaay too many small parts... I'd have to do the same for Gulftown, i3, etc...
I could also add whether HT is on or off to each submission (in bold) as an option.
What do you guys think? Shall I bother doing either?

I didn't mean physically divide the list, just noting whether HT was on or off would be fine. I just think it's relevant since it's harder to have HT on. Thanks for your efforts with this club so far :up:

Quote:

Originally Posted by radaja

CryptiK,thats an awesome OC using such low vcore.
man i wish i had a chip like that to play with:D

Thanks mate, it's still going strong.
03-11-2010, 08:10 PM
radaja

your getting some impressive clocks with it.what board are you using?
03-11-2010, 11:44 PM
zalbard

Quote:

Originally Posted by CryptiK

I didn't mean physically divide the list, just noting whether HT was on or off would be fine. I just think it's relevant since it's harder to have HT on. Thanks for your efforts with this club so far :up:

Ah, that's easy, I'll do that in a moment.
Edit: done, enjoy! Hope you like it! :D

Quote:

Originally Posted by CryptiK

Thanks for your efforts with this club so far :up:

You're welcome! :)

Quote:

Originally Posted by radaja

your getting some impressive clocks with it.what board are you using?

R2E I believe.
03-12-2010, 03:47 AM
CryptiK

Quote:

Originally Posted by radaja

your getting some impressive clocks with it.what board are you using?

Yeah Zalbard is right, Rampage II Extreme.

Quote:

Originally Posted by zalbard

Ah, that's easy, I'll do that in a moment.
Edit: done, enjoy! Hope you like it!

Thanks, it's easier to get a full overview of data now without looking at each submission.
03-12-2010, 05:05 AM
andressergio

Quote:

Originally Posted by CryptiK

Any chance we can get the i7 list divided into 'HT on' and 'HT off' groups, since there is a significant difference in the difficulty of one vs the other?

Here's my submission.

Ci7 920 | HT On | 1.320v | 1.290 Vtt | Watercooled

Running 20th loop:

http://i720.photobucket.com/albums/w...20vrunning.jpg

Finished:

http://i720.photobucket.com/albums/w...0vfinished.jpg

guess the water cooling bird was right :D
awesome results my friend happy for ya enjoy !!!

cheers:D
sergio
03-12-2010, 06:23 AM
RoEy

Sorry to post here in this prestigious thread without screen shots but I’m just curious if people in here have LLC enabled or disabled?

I’m currently at 4ghz, 920 d0, R2E,6gb 3x2 Corsair Dominator 1600.

Bios:
Vcore – 1.275 (1.31 load)
VTT – 1.275
LLC - enabled

Got custom water cooling with a Heatkiller copper (nickel-plated), tfc quad rad and 4870x2 in loop.

Temps at 4ghz under Linx, 67 66 66 62

I just want to know whether it’s better with LLC on or off

How far can I safely push the volts for 24/7? I always thought it was 1.35 for vcore but some of you go way passed that, lol!

I’d love to join this club!

Thanks,

RoEy
03-12-2010, 08:21 AM
ChaosAD

Certainly not the right thread to ask something like this. Better try at R2E thread. But your temps seems a little high for 4Ghz with 1.3v.
03-12-2010, 08:25 AM
zalbard

Quote:

Originally Posted by ChaosAD

Certainly not the right thread to ask something like this. Better try at R2E thread. But your temps seems a little high for 4Ghz with 1.3v.

Hm, in fact, I don't mind, actually.

@ RoEy:
Pretty sure most people run with LLC enabled, but you have to test this by yourself.
Regarding the voltage... Don't be shy, up to 1.5V vCore and VTT should be fine. Just don't fry your chip with high temps.
03-12-2010, 10:20 AM
ban916

So no one can get the i5 750 stable huh??
03-12-2010, 10:33 AM
zalbard

Quote:

Originally Posted by ban916

So no one can get the i5 750 stable huh??

Guess people just don't use really good cooling or really good motherboards with their i5's...

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 04:27 PM.

XtremeSystems