Asus P6T Deluxe Discussion Thread

Printable View

Show 100 post(s) from this thread on one page

02-04-2009, 07:03 AM
Burner27

Quote:

Originally Posted by STi489

There might be an issue running them in RAID 0 if i remember correctly..The reason for the v2 release? I'm not sure but have read this.

Can you run SATA drives on the SAS controller if you need to add extra drives and all your other SATA ports are used?
02-04-2009, 07:08 AM
ap4lifetn

Does anyone use their PCI-E x4 slot? and if so, what for?
02-04-2009, 07:21 AM
Pisklink

Quote:

Originally Posted by tot31

My P6T non deluxe acts the same like yours.

Which bios are you using? I really hope it's bios related and that it can be solved by a bios update. Tonight I will also start a thread on Asus forum and hope other people have solution or similar problems as well. Maybe nut maybe an Asus employee picks up the problems report them to be added in a bios update but I'm affraid that will be a nice fairytale. :D
02-04-2009, 10:12 AM
tot31

Quote:

Originally Posted by Pisklink

Which bios are you using? I really hope it's bios related and that it can be solved by a bios update. Tonight I will also start a thread on Asus forum and hope other people have solution or similar problems as well. Maybe nut maybe an Asus employee picks up the problems report them to be added in a bios update but I'm affraid that will be a nice fairytale. :D

I'm on 0202 bios. I also hoping that these bugs are bios related. It's a bit annoying to power up twice actually for me. I hate Asus forum as it is too damn slow. They need to increase their bandwidth. I really don't know whether any of Asus employees do read their own forum.
02-04-2009, 10:36 AM
highoctane

Quote:

Originally Posted by Khalmyr

I have the P6T vanilla and one of these issues are present.
I do experience, however, a slow boot. I turn on my pc and it takes aaaaaaages until it beeps and boots for the first time. About 10 seconds
After it beeps, everything else is pretty quick

If I'm not mistaken the slow post is an issue for all i7's and has something to do with the way the memory is initialized, this isn't an Asus only issue my MSI x58 does it as well.
02-04-2009, 10:39 AM
highoctane

Quote:

Originally Posted by Pisklink

Everytime I puch the power button to start up my comp. it starts and stops after few seconds, to boot normally after a few seconds stop.
- Booting twice when turning on power.

This happens with all my Asus s775 mb's, never put much thought into but if its a bug then both my P5K-e's have the same bug as well as my P5K Deluxe.

I'm guessing it has something to do with Asus's method of detecting a failed OC but thats just a guess.
02-04-2009, 10:49 AM
G.Foyle

Quote:

Originally Posted by ap4lifetn

Does anyone use their PCI-E x4 slot? and if so, what for?

I do, but in 1x mode only :D
Xonar DX sits there.
02-04-2009, 11:09 AM
Khalmyr

Quote:

Originally Posted by highoctane

This happens with all my Asus s775 mb's, never put much thought into but if its a bug then both my P5K-e's have the same bug as well as my P5K Deluxe.

I'm guessing it has something to do with Asus's method of detecting a failed OC but thats just a guess.

This used to happen with my old Gigabyte P35 DS3L, but never with my P5K Premium
02-04-2009, 12:37 PM
Pisklink

Quote:

Originally Posted by highoctane

This happens with all my Asus s775 mb's, never put much thought into but if its a bug then both my P5K-e's have the same bug as well as my P5K Deluxe.

I'm guessing it has something to do with Asus's method of detecting a failed OC but thats just a guess.

Indeed it with regard to a failed OC. My Asus P5E3-Premium did the same. But the thing is that my comp. also does this when I just powered it up by using the power button. So it acts the same BUT with one major difference. With a failed OC occured everything will be automatically set to default so it can POST. When you hit F1 accordingly your previous settings will be back. But when I just powered up and it starts its reboot cycle it won't ask me to hit F1 or F2 it just boots nicely into Windows and remembers my settings.

It's just fricking annoying that it powers up two times meaning everything will be stressed with current for a short amount of time (HDD, pump, mobo, CPU, etc.). :(
02-04-2009, 01:30 PM
highoctane

Thats exactly what "all" of my s775 Asus boards do as well as my x58 board, blips on for a second then off then turns on again and boots up fine. I wouldn't hold my breath on this being something that is going to change with Asus, they're boards have been doing this on me for the past couple years.

Quote:

Originally Posted by Pisklink

Indeed it with regard to a failed OC. My Asus P5E3-Premium did the same. But the thing is that my comp. also does this when I just powered it up by using the power button. So it acts the same BUT with one major difference. With a failed OC occured everything will be automatically set to default so it can POST. When you hit F1 accordingly your previous settings will be back. But when I just powered up and it starts its reboot cycle it won't ask me to hit F1 or F2 it just boots nicely into Windows and remembers my settings.

It's just fricking annoying that it powers up two times meaning everything will be stressed with current for a short amount of time (HDD, pump, mobo, CPU, etc.). :(
02-04-2009, 01:58 PM
threeply

Still deciding if my next rig will be a single Core i7 Asus or Gigabyte extreme. The wait is on for a dual mobo to surface and if Asus or other top tier vendor will come up with gaming boards for the new EP 55xx series Xeon CPUs.

Perhaps a souped up next-gen Mac Pro
02-04-2009, 04:20 PM
Pisklink

@ Highoctane,

Crap, I really hope that it will be fixed with a new bios update.

@ All

Btw does anybody know how to install chipset driver 9.1.0.1012 from the Intel website. When I double click the install executable (so no .zip file) it starts correctly but the moment it wants to install it says that there are already chipset drivers installed. Yeah duh, only this one is newer ofcourse? How can I update my chipset drivers to this newer version? Or delete the old one and install the new one accordingly?
02-04-2009, 05:08 PM
Burner27

Quote:

Originally Posted by Pisklink

@ Highoctane,

Crap, I really hope that it will be fixed with a new bios update.

@ All

Btw does anybody know how to install chipset driver 9.1.0.1012 from the Intel website. When I double click the install executable (so no .zip file) it starts correctly but the moment it wants to install it says that there are already chipset drivers installed. Yeah duh, only this one is newer ofcourse? How can I update my chipset drivers to this newer version? Or delete the old one and install the new one accordingly?

You have a link to those new chipset drivers? The only ones i see are dated 6/2/2008 v9.0.0.1008

Thx
02-04-2009, 05:17 PM
003

Quote:

Originally Posted by Burner27

You have a link to those new chipset drivers? The only ones i see are dated 6/2/2008 v9.0.0.1008

Thx

Same here. But those drivers (and newer) are available here:
http://www.station-drivers.com/page/intel%20chipset.htm

Newer matrix storage manager as well:
http://www.station-drivers.com/page/intel%20raid.htm

Station-drivers always seems to have way newer drivers than intel themselves.
02-05-2009, 08:04 AM
Pisklink

Quote:

Originally Posted by Burner27

You have a link to those new chipset drivers? The only ones i see are dated 6/2/2008 v9.0.0.1008

Here is the link to the newest chipset driver. The Intel download section is always a complete mess IMHO. As you can see I found this driver at the Intel motherboard section instead of the chipset download section.

@ All

Any body who can tell me how to install this driver or uninstall the old one? Should I be able to uninstall with device manager for example?
02-05-2009, 01:23 PM
Nocturno

Quote:

Originally Posted by 003

Err.. I've got a RAID 0 array on my P6T Deluxe, and OC Profile works just fine. Using the 1102 bios.

I´ve 3 raptors@raid 0 and OC profile doesnt work. Same with 3 friends of mine.
02-05-2009, 02:07 PM
freaksavior

Sorry for not reading all 10 pages, but what issues have you guys had with the board? i have read a lot of complaints but non were specific.

i got this board on sale at microcenter for $285 but don't know if i am going to keep it. So any advice?
02-05-2009, 05:23 PM
Bill Reid

Do any of you guys get a delayed launch of Internet Explorer or, say, Outlook when you first come out of screensaver mode? Takes about 5-10 seconds for anything to launch coming out of screen saver mode... after that everything is fine... any advice?

P6T
920
Velociraptor 300
Vista 64...
02-05-2009, 10:50 PM
derektm

Quote:

Originally Posted by freaksavior

Sorry for not reading all 10 pages, but what issues have you guys had with the board? i have read a lot of complaints but non were specific.

i got this board on sale at microcenter for $285 but don't know if i am going to keep it. So any advice?

Yeah. Best advice: return it and run like hell. There are plenty of reasons why. Just read around.
02-05-2009, 11:24 PM
freaksavior

Quote:

Originally Posted by derektm

Yeah. Best advice: return it and run like hell. There are plenty of reasons why. Just read around.

I did m8, i just heard "this is a bad board stay away"
"this board is aweful pick something else"
"dont get this board"

I did i got nothing but Dont get it. never gave a reason why not to get it.
02-06-2009, 09:36 PM
Pisklink

Quote:

Originally Posted by freaksavior

I did m8, i just heard "this is a bad board stay away"
"this board is aweful pick something else"
"dont get this board"

I did i got nothing but Dont get it. never gave a reason why not to get it.

Personally I don't think MSI or GB will be much better. You could try EVGA but dunno how they perform.
02-06-2009, 09:45 PM
003

Quote:

Originally Posted by derektm

Yeah. Best advice: return it and run like hell. There are plenty of reasons why. Just read around.

Umm...? I just got my i7 under water and right off the bat I am stable at 222 bclock...
02-06-2009, 09:48 PM
cambrian

I am scratching my head as to why you guys have so
much problems with this board and hate it so much.

I have the P6T non-deluxe, using the latest bios,
and running raid 0. Everything is working just fine.
It was the easiest install and overclock i have ever had.
02-07-2009, 12:39 AM
mak1skav

I can't understand the hate for this board either. It was simply as hell to overclock my 920 with P6T Deluxe with most settings on auto :)

My only complaint is some compatibility issues with my Microsoft wireless keyboard and mouse but that was solved with razer products :D
02-07-2009, 02:25 AM
hornet

Quote:

Originally Posted by mak1skav

I can't understand the hate for this board either. It was simply as hell to overclock my 920 with P6T Deluxe with most settings on auto :)

My only complaint is some compatibility issues with my Microsoft wireless keyboard and mouse but that was solved with razer products :D

Attention to the value of QPIv on auto. :up:

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 01:54 PM.

XtremeSystems