Official GIGA P35-S3/DS3/DS3R/DS3P/DS4/DQ6 bios/info thread

Quote:

---

Originally Posted by Kougar

I probably won't get believed about the RAM, but maybe this will show I know at least a little about what I'm doing. :cool: This was almost like a completely different chip from when I did the same OC on my Rev 1 DS3, not to mention it needed less volts. Due to image size I'm only using hotlinks.

E6300
GA-P35-DQ6
2GB Crucial Ballistix DDR2-1067MHz
PC Power & Cooling 750watt Quad Silencer
Foxconn 8800GTS 320mb
Swiftech Apogee GT + MCP655 & Koolance EHX-1050BK

501FSB x 7 = 3.5GHz @ 1.43v
24 hour Orthos Blend stable

http://i111.photobucket.com/albums/n...DQ6/24run2.jpg

534FSB x 7 = 3.73GHz 100% overclock @ 1.53v
7 hours and counting Orthos Blend stable

http://i111.photobucket.com/albums/n...00percent6.jpg

I suspect if I was willing to use 1.6v I could take a potshot at 4GHz, but I'll leave that for a different time. I did verify the P35 chipset is on par with Nvidia's regarding RAM overclocking... I got this Ballistix kit up to 1220MHz @ 2.4v, fully Memtest+ 1.7 stable. :)

---

Nice cpu with that mobo.

Thanks Megatron... it and my old DS3 have served me well since I bought them last August. :)

Quote:

---

Originally Posted by ceemic

500+FSB "orthos stable" guys, what voltages on PCIe, FSB and MCH???

Does memset work on P35?

---

As I said previously, I used Memtest+ 1.7v to verify the Ballistix RAM was stable at 1220MHz on the P35 chipset. Considering the 965P chipset couldn't push the RAM above 1100MHz at any voltage, there has been some serious improvements made between the P35-DQ6 and the 965P-DS3. Memtest works just fine. ;)

I notched my voltages a bit higher than I'd like to be on the safe side, at least either the FSB or MCH can likely stand to lose some voltage but I am not sure yet which. Strangely I was expecting the motherboard to need some extensive fan cooling, but rather bizarrely the majority of the "heatpipe towers" assembly runs almost cool to the touch. I wish Gigabyte would use a NB temp sensor on this board... Even the fins above the VREGs are only just a bit warm, and I don't keep the AC set that low I thought... :shrug: I don't use screamers for fans, I like my silence. :) Also the lack of a TRC setting is a bit miffing, it's an outstanding board but Gigabyte could be doing a fair bit more to improve it further to make it a perfect one.

534FSB Settings (As I best recall, & still being changed):

Memory: "Option 2"
FSB: +0.10
MCH +0.15
PCIe: +0.05 "just because"

Will try some more GPU overclocking at a later date with that PCIe voltage setting as the 8800GTS clocked over 600Mhz core on my old DS3 without issue.

Reality did strike, the last break between Orthos runs I dropped the CPU multi down to 6 and kicked up the FSB... my DS3 was capable of an absurdly high FSB but this specific DQ6 board simply cannot run a 560FSB at all. It makes it to windows, but the system will seize a few seconds into Orthos no matter the MCH and FSB voltage settings. Further overclocking to even 3.8GHz was like I hit a brick wall, as it would load windows but that was it. I'm not sure the board is capable of running the 540+ FSB, at least not until a few more tuned BIOS updates. 3.73GHz is as high as I am going to get out of it after all. :)

I have a problem with DDR voltage: my 2x1GB DDR2 Micron D9DQW "fatbodys" run 24/7 1:1 400MHz@4-3-3-7@2,25V(+0,4V). Until today I was unable to increase DDR voltage to +0,5V(crash after booting into win-->loading antivirus and stuff...). Today, mysteriousy, it booted @+0,5V(2,35V) and I did a little test: http://ceemic.pri.ee/c2d/509spii.JPG
But I can't use +0,6V; crash(BSOD) before loading win:mad:

I have tried w/ F1 and the newer F2 BIOS...

Quote:

---

Originally Posted by Kougar

For anyone using Micron D9 based memory over 1GHz must change the RAM DLL setting to "Option 2" otherwise they are going to have unexplained errors, crashes, and BSODs under special conditions.

---

I have Corsair Dominator 2x1024 8500 C5D and I wonder if they use micron D9 memory chips as I am no more able to have a rock stable system with DQ6 and F4 bios, even at default settings.

Anyway there is something wrong in that BIOS about memory settings: from cold boot I have always Orthos in error after less than a minute; from warm boot, without changing anything, Orthos is stable for hours :confused:

If I can find the F3 bios, I will check with that one.

Ceemic, since you are using the DS3 you should check what the actual voltage the RAM is getting. My old DS3 could not deliver volts higher than 0.04+, if I tried it would make the RAM unstable. The new DS3Rs could be the same .

Brama, your RAM uses special handpicked Micron D9s... Default settings equals "Option 1" PLL settings, so that is why I suggest that you try Option 2 and manually set the voltages. I have not used the F3 BIOS and have no intention of doing so, F4 works great with Option 2 set for my Micron D9 RAM.

ey all, as no one has replied to my other posts, i thought I would repost and use pictures. as you can see the p35c-ds3r has a different set of resistors than the regular ds3r in the area where the vcore and vdrop mods are to be done. I tried soem guess work with no avail, but the board did not die so al is good.

here is a pic of the vcore/vdrop mods for the ds3r from the vr-zone review.

(original site -> http://www.vr-zone.com/index.php?i=4966&s=10)

http://resources.vr-zone.com.sg/Sham...ap35ds3/28.jpg

and here is the same layout on the p35c-ds3r
http://img394.imageshack.us/img394/8083/dsc00921iw8.jpg


http://img357.imageshack.us/img357/1605/dsc00917zu2.jpg

if anyone could tell me how-to find the vmod points for vcore and vdrop, or better, upload a picture with info, would be much appreciated!!!

Is the PCI Clock on these new Gigabyte P35 boards locked at 33 Mhz when raising the FSB? There is no way to directly lock the PCI bus in the BIOS and I don't want to fry my PCI cards from overclocking!

Yes it's locked.

Thanks, Cob. I emailed Gigabyte earlier to ask them this question and they said "there are no options to lock the pci bus". Of course I know there is no PCI Lock in the BIOS, but Gigabyte could have told me they lock the PCI bus to 33 Mhz by default when raising the FSB!

Seriously now, do you think anyone would have been able to hit those moster 500+ MHz FSBs if the PCI frequency wasn't locked? Doh...

1) will TR Ultra 120 xTreme fit a DS3R/P mobo?

2) is there a "cmos reloaded" option in DS3P ?
i'm pretty sure there is nothing like that on DS3R, but could'nt find infos on DS3P.

thanks :)

new beta drivers up at http://www.jzelectronic.de/jz2/index.php

GA-P35-DS4 - Beta BIOS Version F5c
1. Fix 8 GB Ram Vista64 o.ä.

GA-P35-DQ6 - Beta BIOS Version F5d
1. Fix 8 GB Ram Vista64 o.ä.

I installed the beta F5d...dated May 30th, seems pretty much the same. No new options or anything.

guys, i just bought this mobo 2 days ago.. just wonder what's the best bios for now (my board comes with f3 bios), and what software should i use to update the bios from vista 32bit?

thx!

Quote:

---

Originally Posted by irenic

guys, i just bought this mobo 2 days ago.. just wonder what's the best bios for now (my board comes with f3 bios), and what software should i use to update the bios from vista 32bit?

thx!

---

Stick with thos F3 BIOS.....

Quote:

---

Originally Posted by GazC

Just tried it now, I've noticed that the performance option has vanished and that I had tomanually select the PCI-E speed to 101mhz. I'm running at 475x8 as I type this but orthos still bombs very quickly. :(

---

You don't need those performance option in F3 :D Cos it's already very fast in memory performance.

You can try and compare SuperPi 4M or 8M in the same mem setting between F4 and F3 BIOS.....and you'll notice the performance difference.;)

Quote:

---

Originally Posted by M0b1us

You don't need those performance option in F3 :D Cos it's already very fast in memory performance.

You can try and compare SuperPi 4M or 8M in the same mem setting between F4 and F3 BIOS.....and you'll notice the performance difference.;)

---

I know that the performance option is broken, my point was that it didn't help my overclock :(

However, I'm just pumping airconditioned air through my rad and my orthos temps at 3.6ghz have just dropped to 31degrees :D I'm going to have another go!

You guys probably know about the various beta bios by now, but links ahoy anyways:

P35-DQ6 F5d + F5g beta:

http://www.jzelectronic.de/jz2/index.php

P35-DQ6 F5c beta:

http://www.computer-tuning.nl/topics...p35dq6_F5C.rar

The driver page on the Gigabyte website has also been updated.

Gigabyte Easy Tune5 has also been updated:

http://tw.giga-byte.com/Support/Moth...lity&FileID=49

P35T-DS4, official F2 bios:

http://tw.giga-byte.com/Support/Moth...S&FileID=12821

Quote:

---

Originally Posted by GazC

I know that the performance option is broken, my point was that it didn't help my overclock :(

However, I'm just pumping airconditioned air through my rad and my orthos temps at 3.6ghz have just dropped to 31degrees :D I'm going to have another go!

---

A little update, the cpu now seems perfectly stable at just over 3.8ghz. It can crunch small ffts without issue. However blend would crap out in a matter of minutes.

I started to suspect the NB as the ram was running slower than my last stable oc so I whipped the Heatpipe off and saw a very sorry sight - only 1/3rd of the thermal pad on the NB was making contact and the 1/3rd that had been making contact was bone dry. I've taken some pics and once I've found my camera cable I'll show you the pictures I took. I've applied some MX-1 to the NB and SB and I'm now (touch wood) Blending stable. I had to bump up the NB and GMCH voltages a fair way to manage it though as well as incresing DDR voltage to 2.3v - I think I'll save 3.8Ghz for benching only!

I'll post pics in a bit - this needs to be seen!

Edit - I've got a 10C drop on the NB temp, inspite of increasing the voltage!

http://img127.imageshack.us/img127/3489/nb2zi1.th.jpg

http://img524.imageshack.us/img524/7946/nbkk0.th.jpg

waiting photos...

Tomorrow I will get my DS4 and I want to know if first I have to mod it.

Thanks

EDIT: Just in time! :)

Quote:

---

Originally Posted by tal0n

waiting photos...

Tomorrow I will get my DS4 and I want to know if first I have to mod it.

Thanks

---

My advice would be to check it as a matter of course. I'm fortunate in that I don't keep my mobo in a case! I think I would have been still off-line taking my rig apart otherwise.

still trying to workout a vcore and vdrop mod for my p35c-ds3r, can someone who understands vmods plz help?:confused:

http://www.xtremesystems.org/forums/...d.php?t=147781

hey all
probably not the best place for this question, but i'd rather not start a new thread.
i'm going to grab an e6600 along with some 1066 ballistix, but i'm unsure of what mobo to get. i'm currently stuck between the DS3r and DS3p. i once considered the p5k as an option, but these gigabyte boards look too good ;)
anyone have any recommendations? i'm leaning towards the ds3p right now.
thanks

Wow, P35 supports PCI-Express 2.0 :clap:

http://www.bit-tech.net/news/2007/06...ports_pcie_2/1

Is it mean future BIOS update will able to enable PCI-Express 2.0 support in current P35 board? :rolleyes: