hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory
Printable View
hi guys, i have searched a lot for these mods, but i haven't found them, all the mods were foro another PCB, different from mine....i have a simple 9500pro sapphire with in-line memory
i have some experience with 9500pro vmods, could u post a detailed picture of your card, and what mem chips it usesQuote:
Originally Posted by Malachia
post some pictures i can help you out
i will do them, memories are infineon 3.3, they took 330mhz without artifacts, core takes 380 without artifacts, all stock cooling(i have a wb not worry,these were just first prooves...;))
EDIT
http://www.nvworld.ru/pics/r9xvsgfti/image012.gif
http://www.nvworld.ru/pics/r9xvsgfti/image013.gif
k heres the vmods:
theres another pcb revision that has the same mods except if u do the vref and vddq mods as well, the other one looks like this:
only the mem area in the bottom lef tis different afaik
thx a lot!!!
now these are my stock voltages
core 1,524
mems 2.84
with watercooling how much volts i can give at core and at mems?
core 2v
mem 3v
at least
can be more
Quote:
Originally Posted by .::$k4T4N::.
max???like 2v on AMD 32bit....
nvm
Quote:
Originally Posted by blinky
i will beat yours 18500 3dmarks man, you know this :D
wich is the best score for a 9500pro???
best is 18,700 by our own Jeff.Quote:
Originally Posted by Malachia
i would have broken it but i killed my mobo :(
Quote:
Originally Posted by blinky
well, i do 17300 stock cooling without mods, processor@2250mhz, evry 250mhz ares 1000points, i think that i can broke them!
nice, i had my core at 1.75 anything more and i wouldnt gain any more mhz i got 440mhz max stable out of the core then one day the cooling stoped :(. i used a 10 vr resistor for the core.
i got 445 core with vga silencer, but that was with the mem down, my 9500 has power issues :(Quote:
Originally Posted by mattsmall
what cpu u on malachia? if i was on A64 i would be at 20k already ;)
mebe i could have a little race with ya :D
i am on 754....then i will try to do something bettere than 19k :D
i am whaiting for a clawhammer that do 2500mhz 1,6v rs air cooled....then i must search a wb that can hold 5x5 tecs...
sorry where i can found the list of the points with the 9500pro????on the orb there isn't this vga :eek:
i had to search through 25 pages to find this score, the 9500pro's are listed under 9700 non-proQuote:
Originally Posted by Malachia
this is the WR afaik: http://service.futuremark.com/compare?2k1=5886672
i think that i can beat it ;)
http://service.futuremark.com/compare?2k1=8238258
heres my stock cooling no vmods: and i dont even have an A64:Quote:
Originally Posted by Malachia
http://service.futuremark.com/compare?2k1=8170147
:D gotcha beat
im working on a -50c cpu cooler, and possibly another cooler for the GPU, so.... my 9500 will be freezing soon :D
malachia:
try win 2k and tweak a little
up to 800 points extra on a64 : http://forums.techpowerup.com/showthread.php?p=6110
thx a lot!!!
@blinky
also i, but i have also a 9800pro then now like now i am workin on a gpu phase change for here, maybe also the 9500pro will get -50 :D
:DQuote:
Originally Posted by Malachia
sounds good bro
Quote:
Originally Posted by .::$k4T4N::.
not avaible in my SO, don't know why...
malachia, if you get to a point where u cant make the mem go any higher, i can tell you the other two mem vmods.