Gods of DDR2 - Crucial Ballistix + Biostar TPower I45

After playing over the last few months with Ballistix on DFI Infinity P965-S, Asus Commando, DFI Blood Iron and Asus Maximus Formula, I finnaly feel that I have found a board to suit my beloved Crucial Ballistix PC8500 and PC8000. So tonight, I had a little fun :D

Biostar TPower I45 powah
&
Crucial Ballistix PC8500 & PC8000


Single Channel

SuperPI 1M - 4-4-4-12 - 685MHz - DDR2 1370
Valid - 4-4-4-12 - 690MHz - DDR2 1380


Dual Channel

SuperPI 1M - 4-4-4-12 - 675MHz - DDR2 1350
Valid - 4-4-4-12 - 666MHz - DDR2 1333
Max screen - 4-4-4-12 - 685MHz - DDR2 1370


4 x 1GB

SuperPi 1M - 4-4-4-12 - 600MHz - DDR2 1200
Max screen - 4-4-4-12 - 675MHz - DDR2 1350
Valid 4-4-4-12 there is none, I can't get no file valid between 600 and 675 in CAS4, even though I boot into Windows at 1200 4-4-4
Valid 5-5-5-15 - 700MHz - DDR2 1400


CPU-Z and P45 has some serious validation Issues, I have stable clocks where valid is corrupted, and I have a huge distance between max screen and validstion :(


Crucial Ballistix + Biostar I45 = :yepp:

man thats damn nice 4x1 clocking
are they d9gmh or d9gkx??

Nice :up:

You got some nice results out of those Crucial kits, I'm amazed by your 4x1GB clocks.

Keep pushing it! ;)

Quote:

---

Originally Posted by Monstru

After playing over the last few months with Ballistix on DFI Infinity P965-S, Asus Commando, DFI Blood Iron and Asus Maximus Formula, I finnaly feel that I have found a board to suit my beloved Crucial Ballistix PC8500 and PC8000. So tonight, I had a little fun :D

---

Dang, I'm taking back my I45 and bought a DFI P35 LT T2R because I didn't like the BIOS on the Biostar and the fact that it didn't seem to be playing with my RAM nicely and then you go and post this stuff :eek: What were your BIOS settings?!?!

Thx guys :)

Shiranui Gen-An - What settings in particular would you like to know?

Woa man, really good results, but fatastic those with 4x1! Are those a pair of 16FD5? Damn god, I really desperate looking for that kit xD

Quote:

---

Originally Posted by Pekalion

Woa man, really good results, but fatastic those with 4x1! Are those a pair of 16FD5? Damn god, I really desperate looking for that kit xD

---

saw the pic they are 16fd3
i have a set of the same they do 1230 2.0v did not test cas4
my 16fd5 hate cas 4

Quote:

---

Originally Posted by Monstru

Thx guys :)

Shiranui Gen-An - What settings in particular would you like to know?

---

VDIMM, VMCH, Performance level, RCOMP, basically the settings that affect memory operation.

Very nicely done, that board and ram go very well together for sure, and that ram is excellent.

:D:up:

What vdimm & vNB was used for SuperPI 1M - 4-4-4-12 - 675MHz - DDR2 1350 and also for the 5-5-5-15 - 700MHz - DDR2 1400?

I don't get it, I have 4x1gb of Ballistix Tracer and I can barely get them to 1050mhz. Then again, I'm testing for stable...

RCOMP for me works best with Configuration 4. Performance level for such heavy stuff is 15. vNB is 1.5. FSB Compensation Finetune - Enabled. DDR2 Enhaced mode - Auto. vDIMM.....is a well kept secret :D

Quote:

---

Originally Posted by AndrewZorn

I don't get it, I have 4x1gb of Ballistix Tracer and I can barely get them to 1050mhz. Then again, I'm testing for stable...

---

I would hazard a guess that you are being limited by your board. If you have the double sided crucial (D9 based) then the ram should have no problem going higher. What can 2 sticks do in that board?

You may want to try increasing the vNB and see if that helps if you really want to go higher. Some boards aren't capable of 525 MHz + when using 4 x 1GB, the only P35 board I know can do 550+ is the DFI P35. P45's seem to be a little more capable concerning 4 x 1GB overclocking.

awesome result!

Nice Ram.

Hey guys, it seems I forgot about CAS 3 :D Does P45 knows what that is? Well...it's not 965, but it goes pretty well:


Dual Channel

3-3-3-9 - SuperPI 1M - 500MHz - DDR2 1000
3-3-3-9 - Validation - 505MHz - DDR2 1010
3-3-3-9 - Max screen - 522MHz - DDR2 1045

I don't know which is more insane, you, or your ram :p: :D

Very nice work indeed. I don't want to know what vdimm that required :p:

I do, just as a comparrison. Mine does the validation and PI it at 2.40v BIOS/ 2.46v real and the screen at 2.45v BIOS/2.52v real :up:

Sorry, does what at 2.4v? :)

Quote:

---

Originally Posted by CryptiK

I would hazard a guess that you are being limited by your board. If you have the double sided crucial (D9 based) then the ram should have no problem going higher. What can 2 sticks do in that board?

You may want to try increasing the vNB and see if that helps if you really want to go higher. Some boards aren't capable of 525 MHz + when using 4 x 1GB, the only P35 board I know can do 550+ is the DFI P35. P45's seem to be a little more capable concerning 4 x 1GB overclocking.

---

I don't know which sticks I have because I have the Tracers and can't see under the gaudy heatspreaders... should I remove them?

Unfortunately I'm using dividers, so that might be the problem there. DDR21020 or so at 1:1.2 is fine, but higher is not. My NB voltage is as low as I can get it so that might also be the problem.

Quote:

---

Originally Posted by Monstru

Sorry, does what at 2.4v? :)

---

500MHz Pi / 508MHz valid:toast:

Yes, with what timings? Please give the complete configuration an screenshot.

Quote:

---

Originally Posted by Monstru

Yes, with what timings? Please give the complete configuration an screenshot.

---

Quote:

---

Originally Posted by Monstru

Hey guys, it seems I forgot about CAS 3 :D Does P45 knows what that is? Well...it's not 965, but it goes pretty well:


Dual Channel

3-3-3-9 - SuperPI 1M - 500MHz - DDR2 1000
3-3-3-9 - Validation - 505MHz - DDR2 1010
3-3-3-9 - Max screen - 522MHz - DDR2 1045

---

That :rolleyes:

500MHz 2.46v
600MHz "high" voltage

600MHz 3-3-3-9 is just plain ridiculous.:D
What vdimm?

I'd rather not say :D In the region of 3v though :rolleyes: