8 x MTron Pro 7000 Raid: only 500MB/S with Areca 1680ix and Areca 1231ML? + BIG Bench

Hi There,

Iam about to get cracy...

I have 8 MTRON-MSP7025-16GB SSDs and cant get anything like fullspeed or what other people get...

First I tryd with Adaptec Series 5 Controller... due is was overheating (107 Degree celcius) and performed bad on SDDs I ordered

Areca ARC 1680ix-12

and

Areca ARC 1231ML


I setup an Raid0 with all 8 SSDs.... the 1680ix underperform, with Firmware 1.44 AND 1.45, I tryd all, but that was expected by me, due i read it here in the forum

BUT

the 1231ML ALSO dont get the max speed out?

Tryd ARC 1231ML 256MB Firmware 1.43 and 1.44(which is the newest one for him)

What i get is someting like 500-600 MB/S in Raid 0 Setup

http://xs229.xs.to/xs229/08274/tach155.jpg


File copy with h2testw is 361MB/S write 372MB/S read.


What can I do or what did I wrong?

Is there anything special to config for the 1231ML to get fullspeed with the SSDs like the other poeple here around?

:)

Btw: for depper details here is my Test sheet,
(its a BIG Benchmark, spending +30 hours now)

testing the

Areca 1680ix, 1231ML with 1-8 SSDs
Raid0
Raid5
different Stripesize
different Firmwares

CrystalDiskMark
Truecrypt
h2testw
IO Meter with Pattern database, workstation, fileserver,
HD Tune Pro
HD Tach

Excel Sheet (Office 97)

Picture (jpg) (warning, its BIG Resolution :D)


.

You are using areca controller on GA-965P-DQ6 ?

yes, why?

I believe then that you are using your Vga on 16x slot and the Areca on the x4 ,so you are getting some limitation because Areca is a 8x card and you are using it on a 4x slot( the orange slot). I have 1231ml on x8 slot and i am getting burst speed near 1000+

OMG.

U are right.

Thats sucks due i not thinked about it.

So i will think about to get a new mainboard with 2x16 or better for setting up SLI in future: 16/16/8.... are there boards availabe with that...

.

790i boards will have what you want

If you use EVGA 790i Ultra be sure to update the BIOS.

put my controller into the first Slot. Voila: Full Power ;P

ok, I will search over the weekend for an other Motherboard (should have still DDR2 Ram and lots of space for cards ;))

then i will take new benches.

But what i can say now: Arc 1680-ix is way slower with SSDs like the older Arc 1231ML....


cu

Yay congrats for sorting it all out :clap:

Looking forward to seeing those awesome benches :)

4x should be plenty... Its 1000mb/s

Quote:

---

Originally Posted by One_Hertz

4x should be plenty... Its 1000mb/s

---

thats exactly what i was thinking...

lol maybe it was running on 1x somehow hehehe

i always laugh at all these usernames

imagine calling yourself IDE-Freak or SATA-Freak :D ...
486-DX4-Freak << that sounds vintage i like it :D

my original Nickname is drmaniac, dont google for it, the results will be endless ;)

the XS Forum antispam register boot or something dont let me register with my original nickname, dont know why...one hour after registration there was allways a mail, account deleted without any reasons...

lol but ok, i can live with ssd-freak to :ROTF:


for the x4 / x8 : i know that x4 is theoretical 1000mb, but the controller is not without any reason a x8 controller ;)

My burst values are now from ~700 to ~1200 and the average values for reading/writing data are +25%, thats a lot.