Ok being a complete noob here, Im staring at my Fuzion all over and not sure how it comes apart. Do the barbs need to be removed first?
Printable View
Ok being a complete noob here, Im staring at my Fuzion all over and not sure how it comes apart. Do the barbs need to be removed first?
these are four screws @ the bottom of the blocks get a allen key/monkey wrench w/e and just unscrew.
Don't have to take the barbs off.
Well I look and see the allen key and then no allen screws and Im like WTF? Why give the allen key if there aint nothing to use it on.... is it just a free gift? LMAO
look @ the base of the block the are four screws in each corner
Oh yea i got it already, was just commenting on the fact it gives ya allen key but it uses regualr philips screws lol
Really?Quote:
Originally Posted by MaXXimus
http://www.jscomputers.cz/images/dtek_fuzion_2.jpg
Put the bong down and step away from the computer.
Really!! Mine has phillips screws and no allen... thats what had me all screwed up and asking about it
Can we have a pic? I'd like to see it...:rofl: Seriously though, can you take a pic?Quote:
Originally Posted by MaXXimus
Did you buy it used? Or did you happen to buy it with the 775 mount kit pre-assembled?
Regardless, though, you simply have to remove those 4 screws and the whole thing comes apart. :)
Oh I see, apparently because the pro mount requires slightly longer screws, Petra probably uses philips heads instead of the allen ones.
I just got a Fuzion today too, but without the Pro Mount. I gotta say, they use some ghetto o-rings/gaskets. Seems like you could easily tear them apart on accident. I guess I'm used to Swiftech stuff.
Wow ... phillips ... I've never seen a Fuzion with those before. :shrug:
See, I didnt have a bong after all... though with how confused me they had me by supplying a damn unneeded allen key I sure feel like I need one now. you sharing?
They come with the mount kit.
Since this pic is up lemme ask a couple questions... the intake seal goes on the raised black area? And on the back of the washer is a white film and I also see it on the top of the backplate... are these both adhesive?
yeppers ! :up:Quote:
Originally Posted by MaXXimus
Dude, your right about the ghetto o-ring wtf? They look disgusting with bits shredding off etc. :mad:Quote:
Originally Posted by Kilyin
I had to get my Fuzion and Pro-Mount kit from Jab-Tech as Petras was out of stock at the time I ordered. I had to remove the original screws that needed the
wrench with screws for the Pro-mount kit that use philips.
LMAO, you think thats ghetto? :banana::banana::banana::banana:, ya should have seen it before I pealed off most of the bits that were hanging. I swear with what came off I could have made a spare... should have taken a pic damnit.
That was my second gripe, the lame assed ghetto photocopy instructions.Quote:
Originally Posted by MaXXimus
It's difficult to make out the diagram on that paper.
Most likely you have one of the Fuzion's that require the gaskets to be trimmed of the excess. Mine was one of the earlier models and didn't have that issue, but it appears to be a common occurrence with newer purchases.Quote:
Originally Posted by Xerran
Yeah, I'm paranoid that I didn't get a proper seal when I put the block back together because of those flimsy, goopy looking o-rings. I was also a little surprised that the hold down plate isn't attached, it just sits on the block. This thing better perform, because going by aesthetics alone, I'm kinda disappointed.
:ROTF:Quote:
Originally Posted by MaXXimus
Well I'm at the 23 hour mark and no leak so I guess I'm in the clear.
Thats just a lame to put it together like that though... the gasket thats on the copper side was perfect.
Quote:
Originally Posted by CrazyJoe