X1800XT- Testing cpu dryice vga at air

Printable View

11-28-2007, 10:59 AM
BeardyMan

1 Attachment(s)

X1800XT- Testing cpu dryice vga at air

Setup:
------
E6850 @ 1.688V dryice, new cpu pot ;)
ASUS P5K-E vcore mod, not needed for now :)
Crucial ballistix PC6400
X1800XT

3Dmark01- previous WR 63K, new WR -->:D
at 4800Mhz, 1.688V--783/855
68048

3Dmark03-Previous WR 25889, new WR-->:D
at 4700,1.688V--783/837
25987

Aquamark03 - 167040-- should go down soon.:D
at 4800Mhz,1.688V--783/837

3Dmark05 - 12651(WR 13026), short on GPU power, will go down soon :D
at 4800Mhz--1.688V--783/855

3Dmark06 -6386,(WR 6414) short on GPU power and cpu power lol, will go down soon :D
at 4800Mhz--1.688V--783/855

I can bench every bench at 4800mhz without any problems at 1.688V, so i assume it wil be easy to improve all other benches except 06 :)
Don't know wheter i'm going to freeze the card again or perhaps i might send it to a teammate for some heavy coldness loving :D
11-28-2007, 11:38 AM
ownage

Any pictures of the action?, including that new cpu pot? :D
11-28-2007, 11:42 AM
BeardyMan

No not this time :D
New cpu pot? where :D
11-28-2007, 12:57 PM
ownage

Quote:

Originally Posted by BeardyMan

No not this time :D
New cpu pot? where :D

Not the Evo copy??
11-28-2007, 01:05 PM
BeardyMan

2 Attachment(s)

Quote:

Originally Posted by ownage

Not the Evo copy??

I never made a copy only mixes of different containers :D

This was my last container,
and the last one is my new, basicly the same but square for mounting and pouring purposes also no alu used :) Paid around the same price and better performance (few degrees at load and idle ) Same internals a stupid cross :D
11-28-2007, 01:11 PM
Nazu

I didn't remember that X1800XT was that weak :eek: I mean like compared to the 7900/X1900 series...
11-28-2007, 01:21 PM
FrederikV

That are some nice scores! Good job!
11-28-2007, 01:27 PM
BeardyMan

Thx ^^
11-28-2007, 02:20 PM
Cranox

Congrats on the WR's steven
11-29-2007, 08:22 AM
BeardyMan

5 Attachment(s)

70.6K 3Dmark01 WR
done at 5.226ghz ;)
27331 3Dmark03 WR
Aquamark 03 at 172582 WR done at 5.226ghz
3Dmark06 at 6495 WR done at 5226ghz have to upload that though :)
11-29-2007, 09:11 AM
Oliver

Congrats on the WRs did you move on to LN2? :D.
11-29-2007, 09:18 AM
BeardyMan

Quote:

Originally Posted by Oliver

Congrats on the WRs did you move on to LN2? :D.

For cpu i did :D
VGA i didn't, container is back to the machinist for some refining :D

Something walled today, but i can't blame the cpu though, board was left unmodded so i'm a happy man today :D

Cold bug at 136°C, superpi and 3Dmarks al fly at 5300mhz without any probs :)
from -130 to -95.9...
Pouring on this container is a dream i can assure you that, full control to the 0.1degree.
11-29-2007, 09:52 AM
Oliver

Okay and that is a good cpu you have there :).

Keep pushing it.
11-29-2007, 10:05 AM
BeardyMan

Quote:

Originally Posted by Oliver

Okay and that is a good cpu you have there :).

Keep pushing it.

Nah selling it :D

Mid december i will be ready for QX9650 action :D

First my mboard needs some Resistor loving..