X1800XT- Testing cpu dryice vga at air

[BeardyMan]

Setup:
------
E6850 @ 1.688V dryice, new cpu pot
ASUS P5K-E vcore mod, not needed for now
Crucial ballistix PC6400
X1800XT

3Dmark01- previous WR 63K, new WR -->
at 4800Mhz, 1.688V--783/855
68048

3Dmark03-Previous WR 25889, new WR-->
at 4700,1.688V--783/837
25987

Aquamark03 - 167040-- should go down soon.
at 4800Mhz,1.688V--783/837

3Dmark05 - 12651(WR 13026), short on GPU power, will go down soon
at 4800Mhz--1.688V--783/855

3Dmark06 -6386,(WR 6414) short on GPU power and cpu power lol, will go down soon
at 4800Mhz--1.688V--783/855

I can bench every bench at 4800mhz without any problems at 1.688V, so i assume it wil be easy to improve all other benches except 06
Don't know wheter i'm going to freeze the card again or perhaps i might send it to a teammate for some heavy coldness loving

[ownage]

Any pictures of the action?, including that new cpu pot?

[BeardyMan]

No not this time
New cpu pot? where

[ownage]

No not this time
New cpu pot? where

Not the Evo copy??

[BeardyMan]

Not the Evo copy??

I never made a copy only mixes of different containers

This was my last container,
and the last one is my new, basicly the same but square for mounting and pouring purposes also no alu used Paid around the same price and better performance (few degrees at load and idle ) Same internals a stupid cross

[Nazu]

I didn't remember that X1800XT was that weak I mean like compared to the 7900/X1900 series...

[FrederikV]

That are some nice scores! Good job!

[BeardyMan]

Thx ^^

[Cranox]

Congrats on the WR's steven

[BeardyMan]

70.6K 3Dmark01 WR
done at 5.226ghz
27331 3Dmark03 WR
Aquamark 03 at 172582 WR done at 5.226ghz
3Dmark06 at 6495 WR done at 5226ghz have to upload that though

[Oliver]

Congrats on the WRs did you move on to LN2? .

[BeardyMan]

Congrats on the WRs did you move on to LN2? .

For cpu i did
VGA i didn't, container is back to the machinist for some refining

Something walled today, but i can't blame the cpu though, board was left unmodded so i'm a happy man today

Cold bug at 136°C, superpi and 3Dmarks al fly at 5300mhz without any probs
from -130 to -95.9...
Pouring on this container is a dream i can assure you that, full control to the 0.1degree.

[Oliver]

Okay and that is a good cpu you have there .

Keep pushing it.

[BeardyMan]

Okay and that is a good cpu you have there .

Keep pushing it.

Nah selling it

Mid december i will be ready for QX9650 action

First my mboard needs some Resistor loving..