P5K Vanilla....

Printable View

06-03-2007, 02:16 PM
v a d e R`

P5K Vanilla....

Does anyone have a P5K Vanilla Vdroop mod? Also can you do these mods with a normal pencil?
06-03-2007, 03:00 PM
longhorn49

its a little down in this thread

http://xtremesystems.org/forums/show...=143133&page=4

worked fine on mine with a #2 pencil
06-03-2007, 03:41 PM
v a d e R`

Quote:

Originally Posted by longhorn49

its a little down in this thread

http://xtremesystems.org/forums/show...=143133&page=4

worked fine on mine with a #2 pencil

Ok thanks and some quick questions:

1) Why is VDroop so bad?

2) Do I should shade in that area? To remove is for maybe RMA purposes..can I just erase it? (That's a serious question)
06-03-2007, 04:04 PM
dinos22

pencil marks can be wiped with your finger dude no worries :up:

make sure you use 2B pencil though ;)
06-03-2007, 04:11 PM
v a d e R`

Quote:

Originally Posted by dinos22

pencil marks can be wiped with your finger dude no worries :up:

make sure you use 2B pencil though ;)

2B? I was going to use a #2 HB pencil..or a .5 HB Mechanical pencil. Is that alright?
06-03-2007, 04:15 PM
longhorn49

the vdroop is bad because its only 6 phase, thats why i switched mine out for a p5k-e since it uses an 8 phase power management.

I used a mechanical pencil and it worked perfectly.
06-03-2007, 04:26 PM
dinos22

Quote:

Originally Posted by longhorn49

the vdroop is bad because its only 6 phase, thats why i switched mine out for a p5k-e since it uses an 8 phase power management.

I used a mechanical pencil and it worked perfectly.

it's not just that

i have an 8-phase P5B DLX WIFI and it vdrooped like mad......that is just the way they make them but a couple of strokes with a 2B pencil in the right spot will fix that :D
06-03-2007, 04:26 PM
dinos22

Quote:

Originally Posted by v a d e R`

2B? I was going to use a #2 HB pencil..or a .5 HB Mechanical pencil. Is that alright?

give it a shot

i tried with some HB pencil i had and it didn't work

2B worked great :)
06-03-2007, 04:29 PM
v a d e R`

Quote:

Originally Posted by dinos22

give it a shot

i tried with some HB pencil i had and it didn't work

2B worked great :)

Alrite thanks man! So just 2 strokes or so on top of that resistor or w/e it is (the thing enclosed in the red)

XS Owns! Now go look at my air cooling thread :)
06-03-2007, 04:40 PM
dinos22

Quote:

Originally Posted by v a d e R`

Alrite thanks man! So just 2 strokes or so on top of that resistor or w/e it is (the thing enclosed in the red)

XS Owns! Now go look at my air cooling thread :)

yeah dude

is set a vcore and other values and hit smallFFT Orthos for 5 minutes and looks at the Set Bios value > Windows Idle value > Windows Load value

DMM measured

and then do one stroke (system turned off)

go back into windows and repeat the test ( and play by ear )
the idea is to stop vdroop BUT pencil mod improved vdrop as well.... hence why i go stroke by stroke
06-03-2007, 04:45 PM
v a d e R`

Quote:

Originally Posted by dinos22

yeah dude

is set a vcore and other values and hit smallFFT Orthos for 5 minutes and looks at the Set Bios value > Windows Idle value > Windows Load value

DMM measured

and then do one stroke (system turned off)

go back into windows and repeat the test ( and play by ear )
the idea is to stop vdroop BUT pencil mod improved vdrop as well.... hence why i go stroke by stroke

What happens if you do too many strokes? :D
06-03-2007, 04:53 PM
dinos22

Quote:

Originally Posted by v a d e R`

What happens if you do too many strokes? :D

i don't think you can do too many

but sometimes adding more will set you back with worse settings because the initial pencil markings get stuffed

you can also measure resistance with DMM but i'm such a n00b with the DMM i don't even know how to do that properly lol....my stupid DMM is not like my mate's Fluke....i have a :banana::banana::banana::banana:load of settings to click on to get it right lol and his one's got 5 or 6 and you don't have to set it to specific range :)
06-03-2007, 05:00 PM
v a d e R`

Quote:

Originally Posted by dinos22

i don't think you can do too many

but sometimes adding more will set you back with worse settings because the initial pencil markings get stuffed

you can also measure resistance with DMM but i'm such a n00b with the DMM i don't even know how to do that properly lol....my stupid DMM is not like my mate's Fluke....i have a :banana::banana::banana::banana:load of settings to click on to get it right lol and his one's got 5 or 6 and you don't have to set it to specific range :)

Ok, thanks for all your help! I got the basic gist of things now. Set OC>Run Orthos test you mentioned>Check voltages>Add Strokes>recheck voltages.

Thanks!(And If anything goes wrong I always got an eraser :D)
06-03-2007, 05:15 PM
dinos22

ROFL = eraser hahaha

you can use an earbud and some alcohol too if there's a dark spot but i don't think you can kill the mobo with that
06-03-2007, 05:33 PM
v a d e R`

Quote:

Originally Posted by dinos22

ROFL = eraser hahaha

you can use an earbud and some alcohol too if there's a dark spot but i don't think you can kill the mobo with that

Ok cool man :D I think 2 easy strokes would do me fine, thanks a lot!

Since you've already had experiences with the Asus heat pipe on the P5K vanilla, can you please go to this thread and give your input? http://www.xtremesystems.org/forums/...d.php?t=146714

thanks!

v a d e R`
10-01-2007, 10:51 AM
LagunaX

Would a circuitwriter pen be ok or would it short the board?