My lapped TR Ultra 120 X

Printable View

Show 100 post(s) from this thread on one page

05-21-2007, 09:20 PM
P§I

2 Attachment(s)

My lapped TR Ultra 120 X

Took a little bit of time, a little over a hour, done it while watching a movie :up:
05-21-2007, 09:31 PM
Retrolock

wow thats a shiny base! what grits did you use?

And how did you hold down the sand paper? Did you wet it? Lol sorry for the q's i really botched up my lapping job with scythe infinity last month
05-21-2007, 09:34 PM
P§I

I used 400-1000 then 2000 wet sanded it.

Now i just got to decide either to use MX-1 or as5 , hmmm
05-21-2007, 09:48 PM
ChaosMinionX

Quote:

Originally Posted by P§I

I used 400-1000 then 2000 wet sanded it.

Now i just got to decide either to use MX-1 or as5 , hmmm

Neither.....Liquid Metal Pro is the best.
05-21-2007, 10:14 PM
IKIKUINTHENUTZ

Quote:

Originally Posted by P§I

I used 400-1000 then 2000 wet sanded it.

Now i just got to decide either to use MX-1 or as5 , hmmm

Wow, without soap?

I would use MX-1 but thats just my vote

btw with this lapped base, You should go with Shin Estu X23-7783D or Coolabs's Liquid Metal Pro
05-21-2007, 11:15 PM
renozi

OMG that's one of the most beautiful lap jobs I've ever seen!! Puts mine to shame!! Autozone here I come! :P
05-21-2007, 11:30 PM
Spawne32

id use some shin etsu on that
05-21-2007, 11:39 PM
introstand

I'd like to see some results! :) Before and after...
05-21-2007, 11:58 PM
ChaosMinionX

Quote:

Originally Posted by Spawne32

id use some shin etsu on that

How does the Shin Etsu compare to LMP?
05-21-2007, 11:59 PM
Daveb2012

I think the ultra x has a good base already, I decided not to lap mine after I bought the supplies to do it.
05-22-2007, 12:09 AM
ChaosMinionX

Quote:

Originally Posted by Daveb2012

I think the ultra x has a good base already, I decided not to lap mine after I bought the supplies to do it.

Are you talking the Enzo Ultra-X? This thread is about the TR- Ultra 120Xtreme, despite its title being semi misleading with the 120x.
05-22-2007, 12:12 AM
P§I

Quote:

Originally Posted by IKIKUINTHENUTZ

Wow, without soap?

I would use MX-1 but thats just my vote

btw with this lapped base, You should go with Shin Estu X23-7783D or Coolabs's Liquid Metal Pro

Sorry i meant to put that i used soap.

Well i tried as5, I dont have Shin Estu X23-7783D or Coolabs's Liquid Metal Pro

Is it normal that both cores reading different temps?

Intel TAT says 25/20
and with speed fan which one do you go by? Core 0,1 or temp 1,2?

Quote:

Originally Posted by introstand

I'd like to see some results! :) Before and after...

I didn't put it on stock, i knew it was going to be a pain in the arse to mount and stuff, plug stuff back up and all.

Quote:

Originally Posted by Daveb2012

I think the ultra x has a good base already, I decided not to lap mine after I bought the supplies to do it.

Yeah the base was ok, it was concave some, I thought i would go ahead and do it just in case i decided to down the road.

Quote:

Originally Posted by ChaosMinionX

Are you talking the Enzo Ultra-X? This thread is about the TR- Ultra 120Xtreme, despite its title being semi misleading with the 120x.

I didnt think of that title fixed :toast:
05-22-2007, 12:36 AM
ChaosMinionX

Quote:

Originally Posted by P§I

Sorry i meant to put that i used soap.

Well i tried as5, I dont have Shin Estu X23-7783D or Coolabs's Liquid Metal Pro

Is it normal that both cores reading different temps?

Intel TAT says 25/20
and with speed fan which one do you go by? Core 0,1 or temp 1,2?

I didnt think of that title fixed :toast:

If it were me, I would be using Liquid Metal pro

-------------------

Yep its normal for the cores to be reading different temps, many variables as to why this happens.

And individual core temps are going to be more reliable than overall "core" reading.

PS: Nice shine job on that TR U120X
05-22-2007, 01:35 AM
P§I

1 Attachment(s)

Quote:

Originally Posted by ChaosMinionX

If it were me, I would be using Liquid Metal pro

-------------------

Yep its normal for the cores to be reading different temps, many variables as to why this happens.

And individual core temps are going to be more reliable than overall "core" reading.

PS: Nice shine job on that TR U120X

Thanks ill look into, that stuff isnt cheap! lol wish petras carried it, i really like ordering though them

Here is a load test with intel TAT , not to shaby, i know its stock settings. But still not to bad.
05-22-2007, 03:51 AM
introstand

That's really nice! What's your ambient temp? In case? No case? Open case? :)
05-22-2007, 04:24 AM
P§I

Quote:

Originally Posted by introstand

That's really nice! What's your ambient temp? In case? No case? Open case? :)

In closed case, ambient temp around 70
05-22-2007, 04:50 AM
introstand

Sorry if i'm a bit ot but which case are you using. Is that the temp inside the case when it's closed?
05-22-2007, 05:30 AM
P§I

Not OT at all :)
Case I am using is termaltake xaserIII v1000, upgraded 80mm to 120mm with yate loons.2 on the HS, 2 intake,2 exhaust 120mm, one 80 mm blow hole that i havnt upgraded.
Case close, the ambient temp is just my room temp correct? casue i dont have a sensor in my case for temps?
Its messy right now cause i am going to break it down again lol
http://r2clan.com/modules/Forums/files/100_1946_371.jpg
05-22-2007, 05:32 AM
introstand

Those 4x120s must give you a really good airflow... :)
05-22-2007, 06:16 AM
Eagleclaw

VERY nice lapping job you have done. Did you happen to take a similar picture of the heat sink bottom before lapping?
05-22-2007, 01:17 PM
P§I

Quote:

Those 4x120s must give you a really good airflow.

Oh yeah i am quiet happy with them. Very quiet and perform awesome.

Quote:

Originally Posted by Eagleclaw

VERY nice lapping job you have done. Did you happen to take a similar picture of the heat sink bottom before lapping?

Thanks no i didnt, it looked identical to this though base

my camera would have gotten that good of a shot anyways ,lol
05-22-2007, 04:57 PM
IKIKUINTHENUTZ

Have you lapped your cpu's IHS yet? It will go perfectly with this cooler's base
05-22-2007, 05:11 PM
graysky

First off, nice job on the HS. A little overkill, but it looks really nice. I did my u-120 x also.

I agree with IKIKUINTHENUTZ; you'll definitely want to lap the IHS next. I knocked 7-10 °C off my load temps by doing it.

Be sure you document your load temps now and afterwards.
05-22-2007, 05:15 PM
SiGfever

I recommend MX-1 or Shin-Etsu. LMP is better but you stand the chance of semi-welding the cpu to the sink.
05-22-2007, 07:11 PM
P§I

yeah ill prob do the IHS next, wasnt to sure if i was going to stick with the chip so i was waiting on that.

Over kill nawwww, lol Im just anal about stuff that all. But didnt take me 4 hours though :shocked: and 7 dollars of sand paper :shocked: Wally word FTW heh

Quote:

I recommend MX-1 or Shin-Etsu

Yeah i probally going to go with one of those since petras carries them both.

Show 100 post(s) from this thread on one page